{"title":"Arduino Shields","description":"","products":[{"product_id":"l293d-driver-motor-shield-for-arduino","title":"L293D Driver Motor Shield for Arduino","description":"\u003cp\u003eL293D is a monolithic integrated, high voltage, high current, 4-channel driver.Basically, this means using this chip you can use DC motors and power supplies of up to 36 Volts, thats some pretty big motors and the chip can supply a maximum current of 600mA per channel, the L293D chip is also what's known as a type of H-Bridge. The H-Bridge is typically an electrical circuit that enables a voltage to be applied across a load in either direction to an output, e.g. motor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 interface for 5V Servo connected to For Arduino's high-resolution dedicated timer - no jitter.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCan drive 4 DC motors or 2 stepper motors or 2 Servo.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUp to 4 bi-directional DC motors with individual 8-bit speed selection\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUp to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 16V DC\u003cbr\u003e- Pull down resistors keep motors disabled during power-up\u003cbr\u003e- reset button\u003cbr\u003e- 2 external terminal power interface, for seperate logic\/motor supplies\u003cbr\u003e- Tested compatible for Aduino Mega, Diecimila \u0026amp; Duemilanove\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":51191401906478,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/ScreenShot2022-09-05at9.09.36AM_1024x1024_92b062ad-5676-49d5-8ba0-9e8cffe4a85a.webp?v=1761049765"},{"product_id":"w5100-ethernet-micro-sd-for-arduino","title":"W5100 Ethernet \u0026 Micro SD for Arduino","description":"\u003cp\u003eThe Arduino Ethernet Shield V1 allows an Arduino board to connect to the internet. It is based on the Wiznet W5100 ethernet chip. The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top\u003c\/p\u003e\n\u003cp\u003eThere is an onboard micro-SD card slot, which can be used to store files for serving over the network. It is compatible with all the Arduinoboards. The on-board micro SD card reader is accessible through the SD Library. When working with this library, SS is on Pin 4.\u003c\/p\u003e\n\u003cp\u003eThe shield also includes a reset controller, to ensure that the W5100 Ethernet module is properly reset on power-up.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBased on the W5100Based on the Wiznet W5100 allows an Arduino board to connect to the internet.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStackable Design, can directly be supported by Arduino's official Ethernet Library.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupports up to four simultaneous socket connections\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCan be used to store files for serving over the network.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCan be accessed using the Mini SD TF library.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIEEE802.3af compliant\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLow output ripple and noise (100mVpp)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOverload and short-circuit protection\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":51191402266926,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/EthernetShieldW5100Frontnologo_800x.jpg__10133.jpg?v=1770109537"},{"product_id":"arduino-uno-prototype-shield-breadboard","title":"Arduino UNO prototype Shield + Breadboard","description":"\u003cp\u003eUno Proto Shield gives possibility to carry your Arduino projects from breadboard and turn them into a proper circuit and also use your specially designed circuits with Arduino.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt has a nice standard 2.54x2.54mm prototyping grid with big pads\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eA IC pattern for adding DIP ICs up to 20 pins\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower rails down the middle and sides\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eA reset button and an extra general use button\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2x 3mm general use LEDs, red and green, as well as 2 matching resistors\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe ICSP header is up top if you like to upload to your Arduino using a programmer\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eA surface-mount chip area for up to 14 SOIC size parts\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompatible with either tiny breadboards or 'standard' breadboards with the rails removed.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEvery pin is brought out, including the new 3V and Reset header pins\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2x 0.1uF capacitors on either side for extra power stability\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Elegoo","offers":[{"title":"Default Title","offer_id":51191405314350,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/1614142bf03949a614946a96b7fd23f9-hi.jpg?v=1761050051"},{"product_id":"sensor-shield-v5-for-arduino","title":"Sensor Shield V5 For Arduino","description":"\u003cp\u003eSensor Shield V5 For Arduino allows you to connect to various modules like sensors, servos, relays, buttons and potentiometers. Each functional module has buckled port with VCC, GND and Output, which has corresponding port on the Sensor Shield, connected with a plain 2.54mm dual-female cable you may start playing already. Buckled brick cables are like cement for bricks, make the connections easier, secure and more professional looking.\u003c\/p\u003e\n\u003cp\u003eFor Arduino beginners, you do not have a headache for the cumbersome and complex circuit connection, the sensor extends the true sense of the board to simplify the circuit which can easily connect the commonly used sensor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSD Card Interface\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUltrasonic Interface\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRS232 Interface(TTL)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBluetooth Interface\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAPC220 Interface\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eI2C Interface\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e12864 LCD Parallel Interface\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e12864 LCD Serial Interface\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReset Button\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower In\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower LED\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDijital IO Ports: D0-D13\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAnalog IO Ports: A0-A5\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions: 5.7 cm x 5.3 cm x 1.8 cm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 26g\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Elegoo","offers":[{"title":"Default Title","offer_id":51191418159406,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/otronic-sensor-shield-v50-for-arduino-uno-r3.webp?v=1761052445"},{"product_id":"joystick-shield-module-robotics-control","title":"Joystick Shield Module Robotics Control","description":"\u003cp\u003eThis JoyStick Shield Module Robotics Control is an Uno compatible shield that allows you to turn an Arduino Uno or compatible into a game console or robotic controller. 3.3V to 5V Gamepad Joystick Shield Module Game Rocker Button Controller Expansion Board For Arduino Simulated Keyboard Mouse Module.\u003c\/p\u003e\n\u003cp\u003eThe shield sits on top of your Arduino and turns it into a simple controller. 7 momentary push buttons ( 4 big buttons + 2 small buttons + joystick select button ) and a two-axis thumb joystick gives your Arduino functionality on the level of old Nintendo controllers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-Axis Joystick:\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe X-Axis potentiometer of the joystick is connected to A0.  The Y-Axis potentiometer is connected to A1.  The analog inputs on a microcontroller read values over a range of 0-1023 (for typical 10-bit ADC inputs).  The X-Axis and Y-Axis controls should read around 512 (midpoint) when the control is at rest.  As the joystick is moved, one or both of the controls will register higher or lower values depending on how the control is being moved. The joystick also has a button ‘K’ which is activated by pressing the joystick down.  This button is connected to D8.\u003c\/li\u003e\n\u003cli\u003eButtons:\u003cbr\u003eThere are a total of 6 buttons on the board (not including the one on the joystick) labeled A-F.   The 4 large buttons are typically used for up\/down\/left\/right or similar functions.  The two smaller buttons are typically used for less commonly used functions such as ‘select’ or ‘start’ since they are less accessible \/ less likely to be pressed accidentally.  All buttons have pull-up resistors and pull to ground when pressed.\u003cbr\u003eButton A – Connects to D2\u003cbr\u003eButton B – Connects to D3\u003cbr\u003eButton C – Connects to D4\u003cbr\u003eButton D – Connects to D5\u003cbr\u003eButton E – Connects to D6\u003cbr\u003eButton F – Connects to D7\u003c\/li\u003e\n\u003cli\u003eBluetooth Connector:\u003cbr\u003eThe RX\/TX lines are brought out to a separate 4-pin female header along with 3.3V and Ground.  This can be used for connecting a 4-pin 3.3V Bluetooth device or a TTL serial device.\u003c\/li\u003e\n\u003cli\u003eI2C Connector:\u003cbr\u003eThe I2C SDA and SCL lines are brought out to a separate 4-pin male header along with 5V and Ground.  This is in addition to the normal A4\/A5 location of these lines.  This allows for easy attachment of I2C devices.\u003c\/li\u003e\n\u003cli\u003enRF24L01 Connector:\u003cbr\u003eThis connector allows a nRF24L01 RF transceiver module to be plugged in.\u003cbr\u003e2 x 4 Female Header\u003cbr\u003eGND  –  Ground.\u003cbr\u003eVCC  –   3.3V\u003cbr\u003eCE  –      Connects to D9\u003cbr\u003eCSN   –  Connects to D10\u003cbr\u003eSCK –     Connects to D13\u003cbr\u003eMOSI –  Connects to D11\u003cbr\u003eMISO –  Connects to D12\u003cbr\u003eIRQ –     No Connection\u003cbr\u003eNokia 5110 LCD Connector:\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThis female header connector is designed to mount the Nokia 5110 LCD that was originally designed for Nokia phones and provides a 48×84 pixel matrix.\u003cbr\u003eGND  –  Ground.\u003cbr\u003eVCC  –   3.3V\u003cbr\u003eCE  –      Connects to D9\u003cbr\u003eCSN   –  Connects to D10\u003cbr\u003eSCK –     Connects to D13\u003cbr\u003eMOSI –  Connects to D11\u003cbr\u003eMISO –  Connects to D12\u003cbr\u003eIRQ –     No Connection\u003c\/li\u003e\n\u003cli\u003eNokia 5110 LCD Connector:\u003cbr\u003e\n\u003cp\u003eThis female header connector is designed to mount the Nokia 5110 LCD that was originally designed for Nokia phones and provides a 48×84 pixel matrix.\u003c\/p\u003e\n\u003cp\u003eThis interface occupies the same D9-D13 pins as the nRF24L01, so you can’t use both at the same time.\u003c\/p\u003e\n\u003cp\u003eInterface Connector:\u003cbr\u003eThis dual row yellow male header connector provides another point of access to all the buttons, joystick pots, 3.3V, 5V and Ground.  The pin-out of this connector is labeled on the board to the left of the connector.\u003c\/p\u003e\n\u003cp\u003eHere is an off-site link to a schematic of the assembly that you might find helpful.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNRF24L01 RF interface.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor Nokia 5110 LCD interface.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBluetooth interface I2C interface.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003efor one PS2 joystick.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2-Axis joystick.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBluetooth \/ Serial interface.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eI2C interface.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003enRF24L01 interface.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNokia 5110 LCD interface.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInterface connector.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower switch to switch between 3.3 and 5V.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SunFounder","offers":[{"title":"Default Title","offer_id":51191425728814,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/download.jpg?v=1761052979"},{"product_id":"arduino-nano-i-o-expansion-shield","title":"Arduino Nano I\/O Expansion Shield","description":"\u003cp\u003eNow you can connect sensors, servos, and many other modules easily to your Arduino Nano. The expansion board has 14 I\/O pins (each with power and GND), 8 analog pins (also with power and GND for each), 6 PMW pins, 5 I2C expansion pin, AREF output, 3.3V output, and 1 servo power input. Simply, with this board, you won't need a breadboard for your Nano!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe extension board is specially tailored for Arduino NANO, welding on the two rows of pins can be used in Arduino duemilanove 2009, UNO R1.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIt expands the Nano Controller’s ability to connect to these devices in a simple and trouble-free manner.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e14 input\/output pins (servo type with GND, power and signal), 8 analogue pins with power output and GND.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe external power supply is as follows: DC adapter power supply 9V, the pin voltage is 5V-5.25V (can meet the pin voltage, drive the high power load).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUSB is as follows: USB supplies NANO to 5V and pin voltage is 5V-5.25V (can drive sensors and other modules).\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Elegoo","offers":[{"title":"Default Title","offer_id":51191426613550,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/nano-328p-expansion-adapter-breakout-board-io-shield.jpg?v=1761053126"},{"product_id":"3d-scanner-board-kit-ciclop-expansion-board","title":"3D Scanner Board Kit Ciclop Expansion Board","description":"\u003cp\u003eThe Presall 3D Scanner Board Kit Ciclop Expansion Board is a power shield compatible with Arduino UNO board. This shield is used to power control stepper motors using A4988 or DRV8825 Motor Driver Module, laser modules and LDR sensors.\u003c\/p\u003e\n\u003cp\u003eThe board has 12V DC power jack which provides supply to the motors. The design is based on the Arduino CNC Shield.\u003c\/p\u003e\n\u003cp\u003eThis electronic board has been designed to be used in 3D scanners, 3D Printers. Although Ciclop uses one stepper motor and two laser modules, ZUM SCAN allows you to control up to two stepper motors, four laser modules, and two LDR sensors. The shield can thus be used with other versions and future evolutions of this 3D scanner.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThermal shutdown circuitry.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eGround fault protection.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoad short-circuit protection.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupply Voltage: 12VDC.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNo. of motor drivers mounts: 2.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOnboard Reset button.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThermal shutdown circuitry.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eGround fault protection.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoad short-circuit protection.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Taalimiyah","offers":[{"title":"Default Title","offer_id":51191431299374,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/3D-Scanner-Board-Kit-Ciclop-Expansion-Board.avif?v=1761053258"},{"product_id":"wifi-shield-esp8266-for-arduino-boards","title":"WIFI Shield ESP8266 For Arduino Boards","description":"\u003cp\u003eThe ESP8266 Serial WiFi Expansion Board Module is nothing but the ESP8266 ESP-12E UART Wireless WIFI Shield TTL Converter (Shield WiFi ESP8266) makes it easy to connect the Arduino to WiFi networks through the ESP8266. When using it, it is no longer necessary to mount a circuit with several components and wires to interconnect an ESP8266 to the Arduino, simply attach the board to the Arduino, position the DIP switch path according to the shield operating mode and program the Arduino to connect to WiFi networks. In addition, the board can be used without the Arduino, as it has all the pin-outs of the ESP-12E available.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e- 32-bit RISC architecture\u003cbr\u003e- Processor can operate at 80MHz \/ 160MHz\u003cbr\u003e- 32MB flash memory\u003cbr\u003e- 64kB for instructions\u003cbr\u003e- 96kB for data\u003cbr\u003e- Standard native WiFi 802.11b \/ g \/ n\u003cbr\u003e- Operates in AP, Station or AP + Station mode\u003cbr\u003e- It has 11 digital pins\u003cbr\u003e- It has 1 analog pin with 10-bit resolution\u003cbr\u003e- Digital pins except the D0 have interrupt, PWM, I2C and one wire\u003cbr\u003e- Programmable through USB or WiFi (OTA)\u003cbr\u003e- Compatible with Arduino IDE\u003cbr\u003e- Compatible with modules and sensors used in Arduino\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"KeyeStudio","offers":[{"title":"Default Title","offer_id":51191431921966,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/ScreenShot2022-10-11at11.03.51AM_1200x1200_e46073ed-b55f-4644-81c8-5d1a81f0e516.webp?v=1761053390"},{"product_id":"uno-r3-uno-transparent-shell-1","title":"UNO R3 Uno Transparent Shell","description":"\u003cp\u003eThe transparent Acrylic Case Shell Enclosure Gloss Box For Arduino Uno R3 is of high-grade acrylic, which provides excellent protection. This is unique design provides an easy connection to other components. The dimension of the enclosure box is the same as the original Arduino Uno R3.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The UNO R3 module is not included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor Arduino UNO R3 Development Board only.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWith screw copper pillar and installation instructions.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTo protect your little computer against damage, dust and scratches Clear Top and Bottom.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThis case provides easy access to all ports.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIt requires no tools for easy assembly and disassembly.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSimply Clicks Together Enclosure.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KeyeStudio","offers":[{"title":"Default Title","offer_id":51191458890030,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/6645ed8aac55ce78240a53b5-uno-r3-case-enclosure-new-transparent.jpg?v=1761054658"},{"product_id":"uno-r3-uno-abs-black-shell-1","title":"UNO R3 Uno ABS Black Shell","description":"\u003cp\u003eThis case is compatible with Arduino UNO R3 board and derivative board; It does not include the UNO R3 board.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNet Weight: 21g\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCase Size: 7.5cm x 6cm x 2cm (2.95inch x 2.36inch x 0.78inch)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KeyeStudio","offers":[{"title":"Default Title","offer_id":51191459643694,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/61IL3wcgMRL.jpg?v=1761054778"},{"product_id":"uno-r3-proto-screw-shield-v1-0-expansion-board","title":"UNO R3 Proto Screw Shield V1.0 Expansion Board","description":"\u003cp\u003eThe Proto Screw Shield is the ultimate breakout board for an Arduino. It combines a prototyping shield with a full set of 3.5 mm screw terminal blocks. The proto shield part lets you build custom circuitry and then you can easily \u0026amp; securely connect wires and sensors to the terminal blocks. Great for panel mounts, buttons, sensors, enclosures etc.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e1. Provide a terminal for Arduino IO, a convenient port connection\u003cbr\u003e2. 3.81 terminal quality, reliable, convenient and durable\u003cbr\u003e3. With Proto shields, can be used as a prototype extension plate in the middle\u003cbr\u003e4. IO have SMT solder on the back, easy-to-fly line connection\u003cbr\u003e5. Can be placed in the middle of the small bread plate, convenient experimental extension\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse for: Arduino,\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eModule function: plate\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimension(cm): 7.4x6.2x1.7\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eColour: Red\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KeyeStudio","offers":[{"title":"Default Title","offer_id":51191459938606,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/Screenshot2023-09-06at9.12.51AM_720x_b9da4ec8-51d2-410d-99ce-adb632d4f996.webp?v=1776065514"},{"product_id":"mega2560-r3-board-transparent-acrylic-case-1","title":"MEGA2560 R3 Board Transparent Acrylic Case","description":"\u003cp\u003eUsed for: Arduino MEGA2560 R3 development board.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions:114mm x 65mm x 18mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNet weight: 72g\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: Acrylic\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SunFounder","offers":[{"title":"Default Title","offer_id":51191460593966,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/51Wzulpg6TL.jpg?v=1761055109"},{"product_id":"lcd-with-i2c-16x2-module","title":"LCD with I2C (16x2) Module","description":"\u003cp\u003eLCD display module with blue black-light.\u003cbr\u003eWide viewing angle and high contrast.\u003cbr\u003eBuilt-in industry standard HD44780 equivalent LCD controller.\u003cbr\u003eCommonly used in: copiers, fax machines, laser printers, industrial test equipment, networking equipment such as routers and\u003cbr\u003estorage devices.\u003cbr\u003eCan display 2-lines X 16-characters.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eModel: LCD1602\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInterface: I2C\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInterface Address: 0x27\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCharacter Color: White\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBacklight: Blue\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupply voltage: 5V\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBoard Dimensions( L x W x H ) mm: 80 x 36 x 18\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":51191651664174,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/16x2-lcd-blue-with-i2c-module.jpg?v=1761055947"},{"product_id":"cnc-shield-v3-engraving-machine-4","title":"CNC Shield V3 Engraving Machine","description":"\u003cp\u003eThis is CNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board.\u003c\/p\u003e\n\u003cp\u003eThis expansion board as a driver expansion board, can be used for engraving machines, 3D printers, CNC. It is a total of four slots, can drive four A4988 stepper motor. Each road stepper motors only need two IO ports. In other words, six IO ports can be well managed three stepper motors.\u003c\/p\u003e\n\u003cp\u003eThe CNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board is very convenient to use.\u003c\/p\u003e\n\u003cp\u003eAfter insert Arduino CNC Shield V3.0 into Arduino UNO, and installed GRBL firmware then you can quickly DIY a CNC engraving machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCoolant enable\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825 and others) (Not Included)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eJumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1\/32 micro-stepping )\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompact design.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStepper Motors can be connected with 4 pin molex connectors or soldered in place.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRuns on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePlease note that this is an unassembled kit and needs soldering.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLatest Arduino CNC Shield Version 3.10\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eGRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePWM Spindle and direction pins\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2 x End stops for each axis (6 in total)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KeyeStudio","offers":[{"title":"Default Title","offer_id":51267074490670,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/2b1eaaea-8713-4d94-bb68-77db8f8be56d_9c2e84f9-367c-4cff-9fb5-5dece35e45f2.png?v=1763038726"},{"product_id":"ramps-1-6-expansion-control-panel-with-heatsink-upgraded-ramps-1","title":"Ramps 1.6 Expansion Control Panel With Heatsink Upgraded Ramps","description":"\u003cp\u003eArduino Ramps 1.6 Expansion Control Panel with Heatsink Upgraded Ramps can be extended to LCD and other parts, There are heater and fan MOSFET outputs and 3 thermistor interfaces. Applied to 5 stepper drive board, Design of plate pin socket can be easily replaced or removed for future design.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt can be extended to LCD and other parts, There are heater and fan MOSFET outputs and 3 thermistor interfaces.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e5A additional security and component protection fusion, Heated bed control additional 11A fuses.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eApplied to 5 stepper drive boards, the Design of the plate pin socket can be easily replaced or removed for future design.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eI2C and SPI pins are available for future expansion, Servo connectors are used for connecting limit stops, motors and light-emitting diodes. These connectors are gold-plated and have a rated current of 3A, which is very compact.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe LED will light when the heater has output, choose 2 motors to connect to Z Prusa Mendell.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KeyeStudio","offers":[{"title":"Default Title","offer_id":51267101425966,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/4bfdc367ace5a8649704cd00116a7a55_657a2a0e-9fc3-4211-9ab6-5af3c168c86d.webp?v=1763042044"},{"product_id":"cnc-shield-v4-engraving-machine-2","title":"CNC Shield V4 Engraving Machine","description":"\u003cp\u003e1PC CNC Shield V4 Engraving Machine Compatible with Nano 3.0 \/ A4988 Driver Expansion Board Module for The 3D Printer DIY Kit\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe item is of good quality. Tested before shipping. Package reference weight:Weight:0.043kg (0.09lb.). \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KeyeStudio","offers":[{"title":"Default Title","offer_id":51267104407854,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/201808301633294413988_658b7486-92ca-427e-b34b-c35752dc70dd.png?v=1763042581"},{"product_id":"cnc-motor-drive-expansion-shield","title":"CNC Motor Drive Expansion Shield","description":"\u003cp\u003eThis shield is designed to allow you to control a CNC router or milling machine from an Arduino board. It contains 4 driver sockets which allows compatible A4988 driver modules to be inserted providing the ability to drive 3 stepper motor axis (XY\u0026amp; Z) plus an optional 4th auxiliary motor. Additional connectors provide easy connection of end stop sensors and control buttons. \u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eCNC Shield Board Features:\nGRBL 0.8c compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals).\n4-Axis support (XYZA-Can duplicate XYZ or do a full 4th axis with custom firmware using pins D12 and D13).\nOpen source firmware that runs on an UNO for Arduino that turns G-code commands into stepper signals\nJumpers to set the Micro-Stepping for the stepper drivers. \nEndstop connections.\n12-36V input current.\nX, Y, Z axis and extruder stepper motor control. \n\nA4988 Stepper Motor Driver Features: \n\nAutomatic current decay mode detection \/ selection. \nInternal UVLO. \nMixed with slow current decay modes. \nSynchronous rectification for low power dissipation. \nCrossover-current protection. \nThermal shutdown circuitry. \n3.3 and 5 V compatible logic supply. \nFive different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step.\nOutput drive capacity of up to 35 V and ± 1.2 A\nThermal shutdown circuitry. \nGround Fault Circuit. \nLoad short-circuit protection. \nAdjustable current control lets you set the maximum current output with a potentiometer.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"KeyeStudio","offers":[{"title":"Default Title","offer_id":51579660599598,"sku":null,"price":53.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/voltaat-cnc-motor-drive-expansion-shield-112.webp?v=1767373504"},{"product_id":"l298p-pwm-motor-drive-shield-expansion-board","title":"L298P PWM Motor Drive Shield Expansion Board","description":"\u003cp\u003eThis board will allow you to control multiple motors and control them at the same time. It can connect to two big beefy DC motors that can take up to 2A each and one servo motor! It also has digital and analog pins as well, and Bluetooth interface, and Ultrasonic sensor pins! Even more, it has an on-board buzzer and LEDs that indicate. With this board, you can build a full car! What is nice about this board is you can connect it on top of the Arduino Uno and it will power up the digital circuit. However, powering big motors cannot be done with Arduino, therefore it must be connected to an external power source 6.5-12V.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSupply voltage for the logic ICs; 5V Supply voltage for driving the motors: 4.8 - 24V Motor current capabilities: 2A per channel Dedicated servo motor pins Bluetooth interface Ultrasonic sensor pins On-board buzzer On-board LEDs Can be attached to Arduino Uno On-board protection diodes\u003c\/p\u003e","brand":"KeyeStudio","offers":[{"title":"Default Title","offer_id":51579660632366,"sku":null,"price":32.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/voltaat-l298p-pwm-motor-drive-shield-expansion-board-16105080946790_480x480_cef7e494-7db4-4e01-9e14-44c6ed4a52bb.jpg?v=1767373487"},{"product_id":"usb-host-shield-for-arduino","title":"USB Host Shield for Arduino","description":"\u003cp\u003eThe Arduino USB Host Shield allows you to connect a USB device to your Arduino board. The Arduino USB Host Shield is based on the MAX3421E, which is a USB peripheral\/host controller containing the digital logic and analog circuitry necessary to implement a full-speed USB peripheral or a full-\/low-speed host compliant to USB specification rev 2.0.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eHID devices: keyboards, mice, joysticks, etc. Game controllers: Sony PS3, Nintendo Wii, Xbox360. USB to serial converters: FTDI, PL-2303, ACM, as well as certain cell phones and GPS receivers. ADK-capable Android phones and tables. Digital cameras: Canon EOS, Powershot, Nikon DSLRs and P\u0026amp;S, as well as generic PTP. Mass storage devices: USB sticks, memory card readers, external hard drives, etc. Bluetooth dongles.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51579660665134,"sku":null,"price":43.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/voltaat-usb-host-shield-for-arduino-3827425804390_480x480_324afa4a-31d7-4f31-98a8-083bad259869.webp?v=1767373436"},{"product_id":"sd-card-data-logger-shield","title":"SD Card Data Logger Shield","description":"\u003cp\u003eThis shield makes it easy to add a 'hard disk' with gigabytes of storage to your Arduino! The latest version of this popular shield has all the features of the popular original, and is \"R3\" compatible so you can use it with just about any Arduino or compatible. You can be up and running with it in less than 15 minutes - saving data to files on any FAT16 or FAT32 formatted SD card, to be read by any plotting, spreadsheet or analysis program. The included RTC (Real Time Clock) can be used to timestamp all your data with the current time, so that you know precisely what happened when! The data logger is a reliable, well-rounded and versatile design. It is easily expanded or modified and come well supported with online documentation and libraries\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSD card interface works with FAT16 or FAT32 formatted cards. Built in 3.3v level shifter circuitry lets you read or write super fast and prevents damage to your SD card Real time clock (RTC) keeps the time going even when the Arduino is unplugged. The coin cell battery backup lasts for years Included libraries and example code for both SD and RTC mean you can get going quickly Prototyping area for soldering connectors, circuitry or sensors. Two configurable indicator LEDs Onboard 3.3v regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run Uses the \"R3 layout\" I2C and ICSP\/SPI ports so it is compatible with a wide variety of Arduinos and Arduinocompatibles Arduino UNO or ATmega328 compatible - 4 analog channels at 10 bit resolution, 6 if RTC is not used Arduino Leonardo or ATmega32u4 compatible - 12 analog channels at 10 bit resolution\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51579660697902,"sku":null,"price":53.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/voltaat-sd-card-data-logger-shield-3827437699174_480x480_446dbbbe-67b2-46d7-90d0-cb9481915fec.webp?v=1767373407"},{"product_id":"arduino-mega-prototype-shield","title":"Arduino Mega prototype Shield","description":"\u003cp\u003eThis is a bare PCB with no attached or included parts that lets you customize your own Arduino shield using whatever circuit you can come up with! You will even be able to test your circuit or project to make sure everything is working the way it should! This ProtoShield is based off the Arduino Mega 2560 footprint that allows you to easily incorporate it with favorite Arduino-based device.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSolderable Area: A large grid with connected pads (often 100 mil pitch) for soldering components like resistors, capacitors, sensors, and ICs. Breadboard Space: Often includes a small solderless breadboard area for quick, temporary testing. Power \u0026amp; Ground Rails: Dedicated bus lines for easy power distribution to components. Onboard Components: May include a Reset button, status LEDs (power, digital pins), and an ICSP connector for programming. Component Support: Features footprints for both Through-Hole (THT) and Surface Mount Devices (SMD). Compatibility: Works with the Arduino Mega 2560 (Rev3) form factor, supporting stackable designs.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"KeyeStudio","offers":[{"title":"Default Title","offer_id":51579660730670,"sku":null,"price":36.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/voltaat-protoshield-for-arduino-mega-3817265627238_480x480_c5ad3060-0693-4787-85f0-443db44fc128.webp?v=1767373387"},{"product_id":"lcd-keypad-shield","title":"LCD Keypad Shield","description":"\u003cp\u003eThe LCD Keypad Shield is an expansion board designed for Arduino microcontrollers, combining a 16x2 character LCD display and a five-button keypad into a single, easy-to-use interface. It simplifies the process of creating user interfaces for electronics projects by stacking directly onto the Arduino board without requiring complex wiring or soldering.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eUses digital pins 4 - 10, and analog pin 0. On-line Arduino tutorial and example code. Compatible with Arduino Uno, Mega,Duemilanove. This is a 16x2 LCD Keypad module for Arduino Diecimila Duemilanove, UNO, MEGA1280, MEGA2560 board. This shield for Arduino includes a 16x2 HD44780 White on Blue LCD module and a 5 push button keypad for menu selection and user interface programming.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"KeyeStudio","offers":[{"title":"Default Title","offer_id":51579660796206,"sku":null,"price":43.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/voltaat-lcd-keypad-shield-3641402097766_480x480_07e4e22d-30f6-4861-977f-d1d4eeb5d306.webp?v=1767372973"},{"product_id":"arduino-nano-terminal-expansion-shield","title":"Arduino Nano Terminal Expansion Shield","description":"\u003cp\u003eThis shield expands Arduino nano pins to screw terminal type. This adds a layer of professionalism to your connection, since it avoids any looseness in the connections.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSimplified Wiring: It converts the compact Nano pinout into a user-friendly layout that can accept hook-up wires directly via screw terminals. Plug-and-Play: The Nano board simply plugs into the shield's female headers, requiring no soldering for the main connections. External Power Capability: Many versions include a DC power jack and voltage regulators (5V and 3.3V) to provide a stable external power supply for power-hungry components like multiple servo motors, ensuring consistent performance for the entire project.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"KeyeStudio","offers":[{"title":"Default Title","offer_id":51579660828974,"sku":null,"price":15.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/voltaat-arduino-nano-terminal-expansion-shield-16106132930662_480x480_63ebe276-169f-4f80-a6d9-a135231adc6c.jpg?v=1767372939"},{"product_id":"five-key-gamepad-module","title":"Five Key Gamepad Module","description":"\u003cp\u003eThis module provides a 5 button keypad in a gamepad style arrangement. The module provides feedback on the buttons pressed through a single analog connection. This output voltage can be monitored and interpreted to determine the various button presses, reducing the requirement on sockets within microcontroller projects.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e5 buttons occupy an analog port, saving resources\nAnalog acquisition, press the different buttons of different voltage output\nHigh quality Omron button, sensitive and durable\nFor arduino platform, compatible with arduino sensor interface\nProducts include\nAD Keyboard Analog keyboard module\nProvides schematics, arduino test code\nOperating voltage: Operating voltage controller\nData Type: analog signal\nInterface Type: PH 2.5-3P\nSize: 68 x 33mm(approx)\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51579660861742,"sku":null,"price":11.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/596e0ed78ec5d6d4f03a3217de0821d2.jpg?v=1767372892"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/collections\/Arduino_Shields.jpg?v=1770096658","url":"https:\/\/taalimiyah.com\/ar\/collections\/arduino-shields-1\/motor-drivers.oembed","provider":"Taalimiyah","version":"1.0","type":"link"}