This Momentary Tactile Push Button Module DC 5V Switch is ideally suited to add a button to your projects and gives a high signal when it is pressed. The module...

The DC Power Module DC Power Adapter Plate provides a safe and reliable way to connect various applications to a power source. It is widely used in industrial fields and...

On board 4-Channel 817 Are Independent:can achieve different voltage control at then same time Features Driving Port Signal Voltage:3.6-24V Output Port Voltage Port: 3.6-30V Jumper Cap Can Achieve Output Port...

This Ethernet Module connects your Arduino to the internet in mere minutes. Just connect this module to your Arduino board, connect it to your network with an RJ45 cable (not...

We are proud to present the ultimate 5D Rocker Joystick for smooth control and navigation: the Five Direction Navigation Button Module. With its dynamic five-way directional input and precision and...

This is a Light Intensity Detection Module based on the BH1750 chip. BH1750FVI is a digital Ambient Light Sensor IC for the I2C bus interface. This IC is the most...

Active Buzzer module produces a single-tone sound when trigger. To produce different tones, use the Passive Buzzer module. The Active Buzzer module consists of a piezoelectric buzzer with a built-in...

There is no vibration and source inside the passive, so if the DC signal cannot be used to make its tweet, it must be driven by a 2K"5K square wave....

The MAX485 TTL  to RS485 Converter Module converts TTL signal to RS485 for long range, high data rate error prone differential communication. Multiple receivers may be connected to such a...

Presenting our MOSFET PWM Switch Control Board, the core of power management accuracy. This small but mighty board is made to smoothly operate MOSFET switches, giving you an effective PWM...

Trigger signal source: digital high level (DC3.3V-20V), can be connected to the microcontroller IO port, PLC interface, DC power supply, etc., can connect PWM signal, support signal frequency 0-20khzOutput: DC5V-36V,...

The AOD4184 module is an isolation MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor) control module that uses an optocoupler for signal isolation and a MOSFET to switch high-power loads like motors and solenoid...

FR120N Mosfet control Module features with optocoupler to provide electrical isolation between the high-powered MOSFET side and the logic signals used to control the module this will prevent damaging the...

Power supply:3-5V, which can be accessed by pin power;Audio recording control mode: the key to control or microcontroller, IO has drawn the line of control;Buttons control audio recording method of...

The Device is a mnolithic integrated high voltage, high current four channel driver designed to accept standard DTL or TTL logic levels and drive inductive loads (such as relays solenoides,...