{"product_id":"sparkfun-digi-x-on-kit-for-lorawan®-europe","title":"Sparkfun Digi X-ON Kit for LoRaWAN® (Europe)","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Sparkfun Digi X-ON Kit for LoRaWAN® (Europe) contains everything you need to get an IoT system up and running within minutes. Containing an HX15 Gateway from Digi, the innovative SparkFun IoT Node for LoRaWAN® board, and SparkFun's dual-action ENS160\/BME280 (Qwiic) Environmental Combo Board, this kit takes the often convoluted and configuration-intensive effort to set up a LoRaWAN®-based IoT Device and makes it a breeze to get set up and connected.\u003c\/p\u003e\n\u003cp\u003eThe kit also includes a free 30-day subscription to Digi X-ON™ device management platform and free cellular connectivity.\u003c\/p\u003e\n\u003cp\u003eOut of the Box\u003cbr\u003eWith the integration of Digi X-ON technology, the SparkFun IoT Node for LoRaWAN® board allows the creation and deployment of a LoRaWAN® IoT sensor in minutes.\u003c\/p\u003e\n\u003cp\u003eSet up the Digi HX15 Gateway for LoRaWAN® and corresponding Digi account.  \u003cbr\u003eRegister the IoT Node – LoRaWAN® board quickly using the digital data block on the module.\u003cbr\u003eAdd the antenna and a supported Qwiic sensor to the Node board\u003cbr\u003ePower the board  \u003cbr\u003eThe SparkFun IoT Node for LoRaWAN® board is shipped with firmware installed that automatically connects to Digi X-ON, detects an attached sensor, and posts data to the X-ON cloud. Configured via a serial console connection, this application allows rapid evaluation and creation of a LoRaWAN® IoT device.  \u003c\/p\u003e\n\u003cp\u003eIn addition to the pre-installed firmware, full software customization and development are supported with the IoT Node for LoRaWAN® board.\u003c\/p\u003e\n\u003cp\u003eFirmware Development\u003cbr\u003eThe firmware development for the SparkFun IoT Node for LoRaWAN® board is performed primarily in the Arduino environment and enabled by an Arduino XBee® library from Digi. Combining the easy LoRaWAN® access provided by the Digi library with the wide range of Qwiic sensors available from SparkFun, the possibilities of potential LoRaWAN® IoT sensors are endless.\u003c\/p\u003e\n\u003cp\u003eThe pre-installed application is also open source and readily available, enabling rapid customization if desired.\u003c\/p\u003e\n\u003cp\u003eHardware\u003cbr\u003eAt the heart of the IoT Node for LoRaWAN® board is the RP2350 microprocessor from Raspberry Pi, supporting many development environments, including Arduino, micropython, and the Raspberry Pi pico SDK. Besides the capabilities the RP2350 provides, we’ve kitted out the processor with all the goodies your project might require:\u003c\/p\u003e\n\u003cp\u003e16 MB of flash\u003cbr\u003e8 MB PSRAM\u003cbr\u003eQwiic connector\u003cbr\u003eOn-board Lithium Ion (LiPo) battery charging\u003cbr\u003eFuel gauge circuits\u003cbr\u003emicroSD card  \u003cbr\u003eA variety of IO pins\u003cbr\u003eRGB LED and user button \u003cbr\u003eThe Digi XBee® LR module for LoRaWAN® module is directly connected to a serial port of the RP2350, allowing direct control and access to the LoRaWAN® module via a development library provided by Digi.\u003c\/p\u003e\n\u003cp\u003eThe XBee® LR for LoRaWAN® module is the latest LoRaWAN® module from Digi, delivering unmatched operational performance and onboarding simplicity. The Digi XBee® LR uses LoRa™ modulation for Non-Line-of-Sight (NLOS) two-way communications for long-range and high-noise RF environments. Automated connection and two-way device management are a breeze since each module is pre-activated on Digi's X-ON cloud platform.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDigi HX15 Gateway for LoRaWAN® (EU)\u003cbr\u003eInterfaces EU\u003cbr\u003eEthernet Backhaul: RJ-45, 10\/100\/1000 M\u003cbr\u003eCellular Backhaul: LTE Cat 1 or Cat M1\/NB-IoT multi-region, up to 10 Mbps, with 2G fallback for EU\u003cbr\u003eSupported Bands LTE: B1, B3, B7, B8, B20, B28A; 3G: B1, B8; 2G: B3, B8\u003cbr\u003eLTE SIM: Micro SIM (3FF), pre-activated SIM card included on LTE gateways\u003cbr\u003eCellular Antennas: LTE, 3G, 2G,3G (SMA type), omni-directional, 50 Ω, max. input 25 W\u003cbr\u003eLoRa SpecsRegional\u003cbr\u003eBands: EU868\u003cbr\u003eMax TX Power: +27 dBm\u003cbr\u003eRX Sensitivity: −138 dBm\u003cbr\u003eChannels: 8 Rx \/ 1 Tx\u003cbr\u003eLORA Antenna: −1.6 dBm (SMA type), 50 Ω, omni-directional, max. input 25 W\u003cbr\u003eSparkFun IoT Node for LoRaWAN®\u003c\/p\u003e\n\u003cp\u003eRaspberry Pi Foundation's RP2350A Microcontroller\u003cbr\u003e15 Multifunctional GPIO Pins\u003cbr\u003eUp to eight 2-channel PWMs\u003cbr\u003eUp to two UARTs\u003cbr\u003eUp to two I2C buses\u003cbr\u003eUp to two SPI buses\u003cbr\u003eExternal Memory\u003cbr\u003e16MB QSPI Flash Memory\u003cbr\u003e8MB PSRAM Memory\u003cbr\u003eDigi's XBee LR Module\u003cbr\u003eLoRaWAN Transceiver\u003cbr\u003eModular certifications for FCC and IC\u003cbr\u003eFrequency Range: SM 902 to 928 MHz, 868 to 870 MHz\u003cbr\u003eGeneral Features\u003cbr\u003eDimensions: 83mm x 59mm\u003cbr\u003eUSB-C Connectors:\u003cbr\u003eUSB 1.1 Host\/Device support\u003cbr\u003eXBLR\u003cbr\u003e2-pin JST Connector for LiPo Battery (not included)\u003cbr\u003e4-pin Qwiic Connector\u003cbr\u003eLiPo Charger:\u003cbr\u003eMCP73831 Charger Management Controller\u003cbr\u003eCharge rate: 500mA\u003cbr\u003eMAX17048 LiPo Fuel Gauge\u003cbr\u003eXBLR\/UART Selection Switch\u003cbr\u003eLEDs:\u003cbr\u003ePWR - Red 3.3V power indicator\u003cbr\u003eCHG - Yellow battery charging indicator\u003cbr\u003eButtons:\u003cbr\u003e Boot\u003cbr\u003eReset\u003cbr\u003eUser\u003cbr\u003eSparkFun Environmental Combo Breakout - ENS160\/BME280 (Qwiic)\u003c\/p\u003e\n\u003cp\u003e2x Qwiic-Enabled Connectors\u003cbr\u003eInput Voltage Range\u003cbr\u003eTypically 3.3V via Qwiic cable\u003cbr\u003eENS160\u003cbr\u003eI2C Addresses: 0x53 (Default) or 0x52\u003cbr\u003eWide Operating Ranges\u003cbr\u003eVDD: 1.71 1.98V\u003cbr\u003eVDDIO: 1.71V to 3.6V\u003cbr\u003eTemperature: -40°C to +85°C\u003cbr\u003eHumidity: 5% to 95% (non-condensing)\u003cbr\u003eIAQ standard compliance for AQI, eCO2, and TVOC\u003cbr\u003eAir Quality Index - Umweltbundesamt (AQI-UBA)\u003cbr\u003eRange: 1 to 5\u003cbr\u003eResolution: 1\u003cbr\u003eEquivalent Carbon Dioxide (eCO2)\u003cbr\u003eRange: 400 to 65,000 ppm\u003cbr\u003eResolution: 1 ppm\u003cbr\u003eTotal Volatile Organic Compound (TVOC)\u003cbr\u003eRange: 0 to 65,000 ppb\u003cbr\u003eResolution: 1 ppb\u003cbr\u003eImmunity to humidity and ozone\u003cbr\u003eSuperior output stability over the whole temperature and relative humidity operating ranges\u003cbr\u003eEffective ozone compensation\u003cbr\u003eIndependent sensor heater control for highest VOC selectivity and outstanding background discrimination\u003cbr\u003eBME280\u003cbr\u003eVDD: 1.71V to 3.6V\u003cbr\u003eVDDIO: 1.2V to 3.6V\u003cbr\u003eI2C Addresses: 0x77 (Default) or 0x76\u003cbr\u003eTemperature\u003cbr\u003eOperating Range: -40°C to 85°C\u003cbr\u003eFull accuracy to ± 0.5°C from -0°C to 65°C\u003cbr\u003eResolution 0.01°C\u003cbr\u003eHumidity\u003cbr\u003eOperating Range: 0% to 100% RH\u003cbr\u003eAccurate to ±3% from 20% -80% RH\u003cbr\u003eResolution: 0.008%RH\u003cbr\u003ePressure\u003cbr\u003eOperating Range: 30,000 Pa to 110,000Pa\u003cbr\u003eAbsolute Accuracy of ±100Pa\u003cbr\u003eRelative Accuracy of ±12Pa\u003cbr\u003eResolution: 0.18Pa\u003cbr\u003eAltitude Range\u003cbr\u003e0ft to 30,000ft (9.2km)\u003cbr\u003eRelative accuracy of 3.3ft (1m) at sea level, 6.6 (2m) at 30,000ft\u003cbr\u003ePower LED\u003cbr\u003e1.8V AP2127K Voltage Regulator (for ENS160)\u003cbr\u003e2.2kΩ Pull-up Resistors\u003cbr\u003eJumpers\u003cbr\u003ePower LED\u003cbr\u003eI2C Pullup Resistors\u003cbr\u003eSelectable Addresses\u003cbr\u003eENS160: 0x53 (Default) or 0x52\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51613037363502,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/iot-node-lorawan-kit_2.webp?v=1767876397","url":"https:\/\/taalimiyah.com\/ar\/products\/sparkfun-digi-x-on-kit-for-lorawan%c2%ae-europe","provider":"Taalimiyah","version":"1.0","type":"link"}