{"title":"Wifi","description":"","products":[{"product_id":"raspberry-pi-radio-module-2-rmc20452t","title":"Raspberry Pi Radio Module 2 (RMC20452T)","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Raspberry Pi Radio Module 2 (RMC20452T) is a compact, certified wireless module built for integration into custom PCBs and microcontroller products. It packages the Infineon CYW43439 combo chipset and delivers single-band 2.4 GHz Wi-Fi 4 (802.11n) plus Bluetooth 5.2 (Classic + LE) in a SISO architecture, with integrated internal PA, LNA, and a shared 2.4 GHz antenna. A radio module like this enables wireless communications with minimal external components, reduces RF design complexity, and helps OEMs bypass costly radio\/regulatory certification thanks to its full modular certification.\u003c\/p\u003e\n\u003cp\u003eThe module provides data rates up to ~96 Mbps PHY over 20 MHz Wi-Fi channels, supports Bluetooth range classes (up to ~100 m for Class 1, ~10 m for Class 2), and includes power-saving modes (Power Save PM1 with DTIM1 averaging ~1.19 mA). Active current draw is ~43 mA in receive at –50 dBm and ~271 mA in transmit at 16 dBm. Its host interface is low-pin-count gSPI; three host-controlled GPIOs provide additional I\/O flexibility. The RM2 is specified to operate across a temperature range of –30°C to +70°C.\u003c\/p\u003e\n\u003cp\u003eMechanically, the Radio Module 2 is housed in a 21-pad castellated pad package, measuring 16.5 mm × 14.5 mm, with a profile height of ~2.55 mm. It has full software compatibility with the Raspberry Pi Pico SDK. Its production lifetime is guaranteed through at least January 2036.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInfineon CYW43439 Wi-Fi + Bluetooth combo chipset\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWi-Fi 4 (802.11n), 2.4 GHz band only, up to 96 Mbps PHY data rate\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBluetooth 5.2 (Classic + BLE), ~100 m range (Class 1), ~10 m range (Class 2)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntegrated PA, LNA, and shared 2.4 GHz antenna\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHost interface: low-pin-count gSPI\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAdditional I\/O: 3 host-controlled GPIOs\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower consumption:Idle (PM1, DTIM1): ~1.19 mA\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReceive at –50 dBm: ~43 mA\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTransmit at 16 dBm: ~271 mA\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOperating voltage: supplied via host (typical 3.3 V I\/O domain)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOperating temperature range: –30 °C to +70 °C\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePackage: 21-pad castellated module\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions: 16.5 mm × 14.5 mm × ~2.55 mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSoftware compatibility: Raspberry Pi Pico SDK\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFull modular certifications (radio\/regulatory)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eGuaranteed production until at least January 2036\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raspberry Pi","offers":[{"title":"Default Title","offer_id":51612505178414,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/29424-RPi-Radio-Module-RMC20452T-Front.webp?v=1767854134"},{"product_id":"myoware-2-muscle-sensor-wireless-kit","title":"MyoWare 2 Muscle Sensor Wireless Kit","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe MyoWare® 2 Muscle Sensor Wireless Kit is an Arduino-compatible, all-in-one electromyography (EMG) sensor kit that provides everything you need from the MyoWare 2 ecosystem to test out wireless configurations for your application. The MyoWare® 2 Wireless Shield is designed to receive readings from the MyoWare 2 Muscle Sensor and wirelessly transmit sensor data with the included ESP32-WROOM. This shield also includes a built-in LiPo battery to power the muscle sensor and the ESP32 module remotely. The Wireless Shield is equipped with snap connectors and low-profile pogo pins on the board, allowing you to easily stack it on top of the MyoWare 2 Muscle Sensor. Simply select a Power Source and flip the power switch to the ON position to give the sensor all the power it needs to work its myoelectric magic.\u003c\/p\u003e\n\u003cp\u003eThe kit also includes 20 biomedical sensor pads, a mini screwdriver for easy removal of shields, a USB A to C cable for recharging the wireless shield or connecting your microcontroller to a computer, a sensor cable for connecting to muscle groups away from the sensor, and a Myoware cable shield.\u003c\/p\u003e\n\u003cp\u003eThe MyoWare 2 Muscle Sensor included in this kit has been redesigned from the ground up with a new, easy-to-use, compact design and upgraded with the latest and greatest chipset, improving sensor performance and reliability. The sensor measures muscle activity through the electric potential of the muscle, commonly referred to as surface electromyography (EMG or sEMG for short). When your brain tells your muscle to flex, it sends an electrical signal to your muscle to start recruiting motor units (the bundles of muscle fibers that generate the force behind your muscles).\u003c\/p\u003e\n\u003cp\u003eThe harder you flex, the more motor units are recruited to generate greater muscle force. The greater the number of motor units, the more the electrical activity of your muscle increases. The MyoWare 2 Muscle Sensor analyzes a muscle's filtered and rectified electrical activity, outputting a signal (0-VIN volts, where VIN represents the voltage of the power source) that indicates the degree of muscle flexion. The innovative connector system eliminates the need to solder connections for the MyoWare 2 ecosystem, whether visualizing the muscles in action with the MyoWare 2 LED Shield or reading the analog output with an Arduino-compatible development board.\u003c\/p\u003e","brand":"Myoware","offers":[{"title":"Default Title","offer_id":51612507898158,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/DEV-27924-Myoware-Muscle-Sensor-Shield-Front_1.webp?v=1767855108"},{"product_id":"sparkfun-thing-plus-esp32-s2-wroom","title":"SparkFun Thing Plus - ESP32-S2 WROOM","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SparkFun ESP32-S2 WROOM Thing Plus is a highly-integrated, Feather form-factor development board equipped with a 2.4 GHz WiFi System-on-Chip (SoC), from Espressif. The ESP32-S2 WROOM module addresses the security flaws in the original ESP8266 and ESP32 by featuring transparent external flash and RAM encryption, secure boot features allowing only signed firmware, as well as included HMAC and Digital Signature modules that use software inaccessible keys to generate SHA-MAC and MAC signatures! With the ESP32-S2's IoT and connectivity based application focus, this board provides a robust option for connected projects and applications.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eAll of that can sound a little daunting, but we assure you that the ESP32-S2 Thing Plus is anything but! SparkFun's Thing Plus footprint only adds to the board's feature set with the LiPo charging \u0026amp; power circuit making it perfect for home automation or wearable tasks. Possibly the biggest change for the S2 is the ULP (RISC-V) Co-processor. This allows you even more options to balance performance with power consumption over the original ESP32.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eAdditional new features of the ESP32-S2 include dedicated output pins for, DVP Camera Interface, LCD Interface, and integrated temp sensor. If your project needs even more peripherals, we have included a Qwiic connector on board for easy integration into any of SparkFuns Qwiic ecosystem equipped sensors and accessories. You will also find that this Thing Plus utilizes a USB-C connector instead of the microB USB found on its predecessor.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eKeep in mind that while the ESP32-S2 does include an Integrated 802.11 b\/g\/n WiFi Transceiver allowing for speeds up to 150Mbps, it lacks the Bluetooth® capabilities of the original ESP32 module. Additionally, the SRAM \u0026amp; ROM have been reduced. However, the support for larger external storage should easily be able to compensate for this.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSparkFun Thing Plus - ESP32-S2 WROOM Features\u003cbr\u003eESP32-S2 Module\u003cbr\u003e21 Available GPIO\u003cbr\u003e16x 12-bit ADC Channels\u003cbr\u003e2x 8-bit DAC\u003cbr\u003e14x Capacitive Touch Sensing\u003cbr\u003e4x SPI (only one is configured by default in the Arduino IDE)\u003cbr\u003e1x I2S\u003cbr\u003e2x I2C (only one is configured by default in the Arduino IDE)\u003cbr\u003e2x UART (both are configured by default in the Arduino IDE, one UART is used for bootloading\/debug)\u003cbr\u003e8x PWM Channels\u003cbr\u003eThing Plus (or Feather) Form-Factor:\u003cbr\u003eDimensions: 2.55\" x 0.9\"\u003cbr\u003eTwo Mounting Holes:\u003cbr\u003e4-40 screw compatible\u003cbr\u003e28 PTH Pins\u003cbr\u003eUSB-C Connector\u003cbr\u003e2-pin JST Connector for a LiPo Battery (not included)\u003cbr\u003e4-pin JST Qwiic Connector\u003cbr\u003eLEDs:\u003cbr\u003eCHG - Yellow battery charging indicator\u003cbr\u003e13 - Blue status\/test LED (GPIO 18)\u003cbr\u003eButtons:0 Reset\u003cbr\u003eJTAG\/SWD PTH Pins\u003cbr\u003eESP32-S2 WROOM \u003c\/p\u003e\n\u003cp\u003eXtensa® Single-Core 32-bit LX7 Microprocessor (up to 240MHz)\u003cbr\u003eRISC-V ULP Coprocessor\u003cbr\u003e128KB ROM and 320KB SRAM\u003cbr\u003e4MB of Embedded SPI Flash Storage\u003cbr\u003eCryptographic Hardware Accelerators\u003cbr\u003eAES, ECB\/CBC\/OFB\/CFB\/CTR, GCM, SHA, RSA, and ECC (Digital Signature)\u003cbr\u003ePhysical Security Features\u003cbr\u003eTransparent external flash and RAM encryption (AES-XTS)\u003cbr\u003eSecure Boot feature ensures only signed firmware (with RSA-PSS signature) is booted\u003cbr\u003eHMAC and Digital Signature modules use software inaccessible keys to generate SHA-MAC and MAC signatures\u003cbr\u003eIntegrated 802.11 b\/g\/n WiFi 2.4GHz Transceiver (up to 150Mbps)\u003cbr\u003eIntegrated Temperature Sensor (-20°C to 110°C)\u003cbr\u003eOperating Voltage: 3.0 to 3.6V\u003cbr\u003eWiFi: 310mA (peak)\u003cbr\u003eLight-Sleep: 550µA\u003cbr\u003eDeep-Sleep: 20-235µA\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51612509012270,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/17743-SparkFun_Thing_Plus_-_ESP32-S2_WROOM-04.webp?v=1767855338"},{"product_id":"sparkfun-iot-redboard-rp2350","title":"SparkFun IoT RedBoard - RP2350","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMeet the SparkFun RP2350 IoT RedBoard, a powerful and versatile wireless development platform that combines the groundbreaking Raspberry Pi® RP2350 microcontroller with the Raspberry Pi® RM2 radio module. This board is a true game-changer, offering a unique dual-core, dual-architecture configuration that allows you to choose your processing cores, all while fitting the familiar Arduino R4 form factor.\u003c\/p\u003e\n\u003cp\u003eThe RP2350: Unprecedented Core Flexibility\u003cbr\u003eThe star of the show is the Raspberry Pi RP2350, which redefines processing flexibility. This microcontroller provides a unique dual-core setup that allows you to select, in software, which cores you want to run:\u003c\/p\u003e\n\u003cp\u003eA pair of Arm® Cortex-M33 cores\u003cbr\u003eA pair of Hazard3 RISC-V cores\u003cbr\u003eOr one of each!\u003cbr\u003eAll cores are capable of running at up to 150 MHz. This isn't a quad-core MCU; instead, you select at boot which two processors you want to run, allowing you to develop and test on two different architectures with a single board. This IoT RedBoard uses the RP2350B variant, which is packed with 48 GPIO, eight analog inputs, two UARTs, two SPI controllers, two I2C controllers, and a USB 1.1 controller for host and device support.\u003c\/p\u003e\n\u003cp\u003eSeamless Wireless IoT with the RM2 Module\u003cbr\u003eFor true IoT capability, the board integrates the Raspberry Pi Radio Module (RM2). Operating over an SPI interface, the RM2 provides robust wireless connectivity with:\u003c\/p\u003e\n\u003cp\u003eWiFi 4\u003cbr\u003eBluetooth® 5.2 (supporting BLE, Basic Data Rate, and Enhanced Data Rate)\u003cbr\u003eFully-Loaded for Prototyping\u003cbr\u003eWe designed this RedBoard to be your all-in-one platform for complex projects. It comes fully loaded with features that streamline development:\u003c\/p\u003e\n\u003cp\u003eOnboard Power: Integrated LiPo battery power and charging circuits let you take your projects on the go.\u003cbr\u003eExpanded Memory: Includes a massive 16MB of external Flash and 8MB of PSRAM connected to the RP2350's QSPI interface.\u003cbr\u003eExpandable Storage: A µSD card slot provides ample room for data logging and file storage.\u003cbr\u003eQwiic Connectivity: A built-in Qwiic connector gives you plug-and-play access to the entire SparkFun Qwiic ecosystem of sensors, displays, and actuators.\u003cbr\u003eFlexible Connections: The board shares a pinout between standard female headers and matching 0.1\"-spaced plated through-hole (PTH) headers, allowing you to choose between temporary or permanent soldered connections.\u003cbr\u003eHigh-Speed Hardware Interface\u003cbr\u003eFor advanced applications, the board features a 22-pin ribbon cable connector tied directly to the RP2350's HSTX (high-speed transmit) pins, enabling high-throughput data applications. A 3-pin debug header is also included for in-depth troubleshooting.\u003c\/p\u003e\n\u003cp\u003eMulti-Platform Software Support\u003cbr\u003eThe RP2350 IoT RedBoard is built for developers of all levels. It has full software support for C\/C++ using the Raspberry Pi Pico SDK, MicroPython, and the Arduino environment, so you can choose the programming language and environment you prefer.\u003c\/p\u003e\n\u003cp\u003eStart Inventing Immediately: SIK Examples Included\u003cbr\u003eTo help you get inventing even faster, we’ve pre-loaded all the SparkFun Inventor's Kit (SIK) for MicroPython circuit source files directly onto the RP2350 IoT RedBoard! You'll find them in the sik_examples folder. Best of all, these files are included on every RP2350 IoT RedBoard, whether you get it as part of the full SIK or as a standalone board!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIoT RedBoard Features RP2350B\u003cbr\u003eIntegrated USB interface 48 GPIO pins8 ADC pins\u003cbr\u003e1x UART\u003cbr\u003e1x I2C\u003cbr\u003e1x SPI\u003cbr\u003e8x HSTX pins\u003cbr\u003eRaspberry Pi Radio Module (RM2)\u003cbr\u003eWiFi 4\u003cbr\u003eBluetooth 5.2\u003cbr\u003eBDR (1 Mbps)\u003cbr\u003eEDR (2 or 3 Mbps)\u003cbr\u003e16MB Flash\u003cbr\u003e8MB PSRAM\u003cbr\u003eµSD Card Slot\u003cbr\u003eMCP73831 Single-Cell LiPo Battery Charger\u003cbr\u003eMAX17048 Battery Fuel Gauge\u003cbr\u003e3-pin 1mm Vertical Debug Connector\u003cbr\u003e22-pin 0.5mm Vertical HSTX Ribbon Connector\u003cbr\u003eQwiic Connector\u003cbr\u003eLEDs:\u003cbr\u003ePWR - Red power LED\u003cbr\u003eCHG - Yellow battery charge status LED\u003cbr\u003eSTAT - Blue status LED tied to RP2350 GPIO25\u003cbr\u003eWRL - Blue status LED tied to RM2 IO0\u003cbr\u003eRGB - WS2812 RGB LED Data In connects to RP2350 IO3\u003cbr\u003eButtons:\u003cbr\u003eRESET\u003cbr\u003eBOOT\u003cbr\u003eUSER\u003cbr\u003eDual ARM CortexM3 and Hazard3 RISC-V Processors\u003cbr\u003eUser-selectable for dual-cores\u003cbr\u003e520kB integrated SRAM in 10 banks\u003cbr\u003e3.3V-tolerant GPIO (powered) with 3.3V failsafe (unpowered)\u003cbr\u003ePeripherals\u003cbr\u003e2x UART\u003cbr\u003e2x SPI\u003cbr\u003e2x I2C\u003cbr\u003e8 HSTX Pins (Raspberry Pi's High-speed transmit interface)\u003cbr\u003e24x PWM Channels\u003cbr\u003e12x PIO State Machines\u003cbr\u003e6x Analog Input Channels\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51612514124078,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/27708-redboard-rp2350-front.webp?v=1767855758"},{"product_id":"sparkfun-iot-redboard-esp32-micropython-development-board","title":"SparkFun IoT RedBoard - ESP32 MicroPython Development Board","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMeet the SparkFun ESP32 IoT RedBoard, our development board specifically designed to get you running with MicroPython right out of the box. It combines the power and connectivity of the popular ESP32-D0WDQ6 with a full suite of hardware features, making it the perfect all-in-one platform for your next connected project. This board makes it easier than ever to get started using SparkFun's MicroPython-capable modules.\u003c\/p\u003e\n\u003cp\u003eThe Power and Connectivity of the ESP32\u003cbr\u003eAt its core is the ESP32-D0WDQ6, a chip designed for scalability and adaptability. This dual-core processor provides built-in WiFi and Bluetooth connectivity and is powerful enough for demanding tasks like voice encoding, music streaming, and MP3 decoding, yet efficient enough for low-power sensor networks.\u003c\/p\u003e\n\u003cp\u003eInternally, the ESP32 runs freeRTOS with LwIP and features built-in TLS 1.2 with hardware acceleration. It also supports secure (encrypted) over-the-air (OTA) upgrades, allowing you to update your products even after they've been deployed, with minimum cost and effort.\u003c\/p\u003e\n\u003cp\u003eFully-Loaded for IoT Prototyping\u003cbr\u003eWe've designed this RedBoard to be your complete platform for any connected project. It comes fully loaded with features that streamline development:\u003c\/p\u003e\n\u003cp\u003eQwiic Connect System: A built-in Qwiic connector gives you plug-and-play access to the entire SparkFun Qwiic ecosystem of sensors, displays, and actuators—no soldering required.\u003cbr\u003eOnboard LiPo Management: Includes a 2-pin JST connector for a single-cell LiPo battery, a built-in charger (MCP73831), and a fuel gauge (MAX17048) to monitor your battery's charge.\u003cbr\u003eExpandable Storage: A µSD card slot provides ample room for data logging, storing configuration files, or serving web pages.\u003cbr\u003eRobust USB-C: Features a modern USB-C connector with through-hole anchoring for a more durable connection, and uses the ubiquitous CH340G for USB-to-serial communication, requiring fewer driver installs.\u003cbr\u003eOptimized for MicroPython\u003cbr\u003eThis board's primary feature is its out-of-the-box support for MicroPython. It comes pre-programmed to run MicroPython, removing the setup hassle and letting you start coding immediately. This makes it the ideal platform for getting started with SparkFun's growing line of MicroPython-compatible modules and building powerful, connected projects with a simple, intuitive programming language.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCPU and On­Chip Memory\u003cbr\u003eESP32-D0WD-V3 embedded, Xtensa dual-core 32-bit LX6 microprocessor, up to 240MHz\u003cbr\u003e448KB ROM\u003cbr\u003e520KB SRAM\u003cbr\u003e16KB SRAM in RTC\u003cbr\u003eWi­Fi 802.11b\/g\/n\u003cbr\u003eBit rate: 802.11n up to 150Mbps\u003cbr\u003eA-MPDU and A-MSDU aggregation\u003cbr\u003e0.4µs guard interval support\u003cbr\u003eCenter frequency range of operating channel: 2412 ~ 2484MHz\u003cbr\u003eBluetooth®: Bluetooth® V4.2 BR\/EDR and Bluetooth® LE specification\u003cbr\u003ePeripherals: microSD card, UART, SPI, SDIO, I2C, LED PWM, Motor PWM, I2S, IR, pulse counter, GPIO, capacitive touch sensor, ADC, DAC, TWAI® (compatible with ISO 11898-1, i.e. CAN Specification 2.0)\u003cbr\u003eIntegrated Components on Module\u003cbr\u003e40MHz crystal oscillator\u003cbr\u003e4\/8\/16 MB SPI flash\u003cbr\u003e4-pin Qwiic Connector\u003cbr\u003e2-pin JST Connector for Single Cell, LiPo Batteries\u003cbr\u003eBuilt-in LiPo Charge IC (MCP73831)\u003cbr\u003eDefault Charge Rate: 500mA\u003cbr\u003eLiPo Fuel Gauge (MAX17048)\u003cbr\u003eLEDs:\u003cbr\u003eCHG\u003cbr\u003ePWR\u003cbr\u003eRX\/TX\u003cbr\u003eUser LED\u003cbr\u003eAddressable RGB LED (WS2812)\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51612525527342,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/28434-redboard-iot-esp32-micropython-front.webp?v=1767855951"},{"product_id":"sparkfun-thing-plus-rp2350","title":"SparkFun Thing Plus - RP2350","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SparkFun RP2350 Thing Plus is a dynamic and powerful wireless development platform built to be the new heart of your IoT projects. It combines the revolutionary Raspberry Pi RP2350 microcontroller with their RM2 radio module, integrating them seamlessly into our popular Thing Plus form factor.\u003c\/p\u003e\n\u003cp\u003eThis board comes fully loaded with all the standard hardware you expect from a Thing Plus, including onboard LiPo battery charging, a fuel gauge, a micro-SD card slot, and a Qwiic connector. This combination of processing flexibility, complete wireless connectivity, and robust power management makes it the ideal platform for a massive variety of applications, from local sensor nodes to remote, battery-powered IoT devices.\u003c\/p\u003e\n\u003cp\u003eThe RP2350: Unprecedented Core Flexibility\u003cbr\u003eThe star of the show is the Raspberry Pi RP2350, a unique dual-core, dual-architecture microcontroller. This chip provides a unique setup that allows you to select, in software, which cores you want to run:\u003c\/p\u003e\n\u003cp\u003eA pair of Arm® Cortex-M33 cores\u003cbr\u003eA pair of Hazard3 RISC-V cores\u003cbr\u003eOr one of each!\u003cbr\u003eAll cores are capable of running at up to 150 MHz. This isn't a quad-core MCU; instead, you select at boot which two processors you want to run, allowing you to develop and test on two different architectures with a single board. The RP2350 also features 520kB of SRAM, two UARTs, two SPI controllers, two I2C controllers, and a USB 1.1 controller for host and device support.\u003c\/p\u003e\n\u003cp\u003eSeamless Wireless \u0026amp; Abundant Memory\u003cbr\u003eFor true IoT capability, the board integrates the Raspberry Pi Radio Module (RM2). With ample memory at its disposal, this Thing+ can utilize all its features, including the RM2, which provides robust wireless connectivity.\u003c\/p\u003e\n\u003cp\u003eRaspberry Pi RM2 Radio Module: For true IoT capability, the board integrates the RM2, providing single-band 2.4GHz WiFi 4 (802.11n) and Bluetooth® 5.2 (supporting BLE, Basic Data Rate, and Enhanced Data Rate). We've designed this board to use the same SPI pins for the radio as official Raspberry Pi boards, ensuring easy software compatibility.\u003cbr\u003eMassive Memory: The board is equipped with 16MB of external Flash and 8MB of PSRAM connected to the RP2350's QSPI controller, providing ample room for complex applications and large data buffers.\u003cbr\u003ePacked with Thing Plus Features\u003cbr\u003eThis board is built for projects that leave the desktop. The Thing Plus form factor (which shares the Feather pinout) includes a host of essential hardware:\u003c\/p\u003e\n\u003cp\u003eLiPo Battery Management: An onboard JST connector, charging circuit, and MAX17048 fuel gauge let you safely charge and monitor a LiPo battery for portable projects.\u003cbr\u003eQwiic Connector: The built-in Qwiic connector gives you plug-and-play access to the entire SparkFun Qwiic ecosystem of sensors, displays, and actuators.\u003cbr\u003eMicro-SD Card Slot: The micro-SD socket provides a simple way to add massive data logging capabilities or store configuration files.\u003cbr\u003eMulti-Platform Software Support\u003cbr\u003eThe RP2350 Thing+ is built for all developers. It has full software support for C\/C++ using the Raspberry Pi Pico SDK, MicroPython, CircuitPython, and the Arduino environment, so you can choose the programming language and environment you prefer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRP2350\u003cbr\u003e21 Multifunctional GPIO*\u003cbr\u003e*\"Freebie\" pin tied to WS2812 Data Out\u003cbr\u003e13x GPIO (3 Analog-capable pins)\u003cbr\u003e1x UART\u003cbr\u003e1x I2C\u003cbr\u003e1x SPI\u003cbr\u003eRaspberry Pi Radio Module (RM2)\u003cbr\u003eWiFi 4\u003cbr\u003eBluetooth 5.2\u003cbr\u003eBDR (1 Mbps)\u003cbr\u003eEDR (2 or 3 Mbps)\u003cbr\u003eThing Plus Form-Factor:\u003cbr\u003eDimensions: 2.3\" x 0.9\"\u003cbr\u003eFour Mounting Holes:\u003cbr\u003e4-40 screw compatible\u003cbr\u003e28 PTH Pins\u003cbr\u003eUSB-C Connector\u003cbr\u003e2-pin JST Connector for a LiPo Battery (not included)\u003cbr\u003e4-pin JST Qwiic Connector\u003cbr\u003eµSD Card Slot\u003cbr\u003eMCP73831 LiPo Battery Charger\u003cbr\u003eMAX17048 Fuel Gauge\u003cbr\u003eLEDs: \u003cbr\u003ePWR - Red power LED\u003cbr\u003eCHG - Yellow battery charge status LED\u003cbr\u003eSTAT - Blue status LED tied to the RM2's GPIO0\u003cbr\u003eWS2812 RGB LED - Data In tied to GPIO14\u003cbr\u003eRP2350 General Features\u003c\/p\u003e\n\u003cp\u003eDual ARM CortexM3 and Hazard3 RISC-V Processors\u003cbr\u003eUser-selectable for dual-cores\u003cbr\u003e520kB integrated SRAM in 10 banks\u003cbr\u003e5V-tolerant GPIO (powered) with 3.3V failsafe (unpowered)\u003cbr\u003ePeripherals\u003cbr\u003e2x UART\u003cbr\u003e2x SPI\u003cbr\u003e2x I2C\u003cbr\u003e4 HSTX Pins (Rasbperry Pi's High-speed transmit interface)\u003cbr\u003e24x PWM Channels\u003cbr\u003e12x PIO State Machines\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51612537094446,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/wrl-25134-thing-plus-rp2350-reshoot-front.webp?v=1767856110"},{"product_id":"sparkfun-datalogger-iot-9dof","title":"SparkFun DataLogger IoT - 9DoF","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SparkFun DataLogger IoT - 9DoF is a data logger that comes preprogrammed to automatically log IMU, GPS, and various pressure, humidity, and distance sensors. All without writing a single line of code! The DataLogger automatically detects, configures, and logs Qwiic sensors. It was specifically designed for users who just need to capture a lot of data to a CSV or JSON file and get back to their larger project. Save the data to a microSD card or send it wirelessly to your preferred Internet of Things (IoT) service!\u003c\/p\u003e\n\u003cp\u003eIncluded on every DataLogger IoT is an IMU for built-in logging of a triple-axis accelerometer, gyro, and magnetometer. Whereas the original 9DOF Razor used the old MPU-9250, the DataLogger IoT uses the ISM330DHCX from STMicroelectronics and MMC5983MA from MEMSIC. Simply power up the DataLogger IoT, configure the board to record readings from supported devices, and begin logging! Data can be time-stamped when the time is synced to NTP, GNSS, or RTC.\u003c\/p\u003e\n\u003cp\u003eThe DataLogger IoT is highly configurable over an easy-to-use serial interface. Simply plug in a USB-C cable and open a serial terminal at 115200 baud. The logging output is automatically streamed to both the terminal and the microSD card. Pressing any key in the terminal window will open the configuration menu.\u003c\/p\u003e\n\u003cp\u003eThe DataLogger IoT - 9DoF automatically scans, detects, configures, and logs various Qwiic sensors plugged into the board (No soldering! No programming!). Currently, auto-detection is supported on the following Qwiic products (with the exception of the ISM330DHCX and MMC5983 which is built-in on the SPI port):\u003c\/p\u003e\n\u003cp\u003eAny u-Blox GNSS Modules (Lat\/Long, Altitude, Velocity, SIV, Time, Date) such as:\u003cbr\u003eZED-F9P 1cm High Precision GPS\u003cbr\u003eNEO-M8P-2 2.5cm High Precision GPS\u003cbr\u003eSAM-M10Q 1.5m GPS\u003cbr\u003eSAM-M8Q 1.5m 72 Channel GPS\u003cbr\u003eZOE-M8Q 1.5m Compact GPS\u003cbr\u003eNEO-M9N 1.5m GPS\u003cbr\u003eMAX-M10S 1.5m Ultra-Low Power GPS\u003cbr\u003eInertial Measurement Unit (Accelerometer and Gyro):\u003cbr\u003eISM330DHCX IMU (Built-in for the 9DoF version via SPI)\u003cbr\u003eMagnetometer:\u003cbr\u003eMMC5983 (Built-in for the 9DoF version via SPI)\u003cbr\u003eDistance:\u003cbr\u003eTMF8820 dToF Imager\u003cbr\u003eTMF8821 dToF Imager\u003cbr\u003eVCNL4040 Proximity and Lux\u003cbr\u003eVL53L1X Distance - 4 Meter\u003cbr\u003eVL53L4 Distance - 1.3 Meter\u003cbr\u003eVL53L5 ToF Imager\u003cbr\u003eSTHS34PF80 Human Presence and Motion and Mini\u003cbr\u003ePressure, Altitude, Humidity, and Temperature Data:\u003cbr\u003eBME280 Atmospheric\u003cbr\u003eLPS25HB Absolute Pressure\u003cbr\u003eMPR Series - MPRLS0025PA00001A MicroPressure\u003cbr\u003eMS8607 Pressure, Humidity, and Temperature\u003cbr\u003eMS5637 Barometric Pressure and Temperature\u003cbr\u003eAHT20 Humidity and Temperature\u003cbr\u003eSHTC3 Humidity and Temperature\u003cbr\u003eSDP31 Differential Pressure\u003cbr\u003eBMP384 Pressure and Temperature\u003cbr\u003eBMP581 Pressure and Temperature\u003cbr\u003eENS160\/BME280 Environmental Combo\u003cbr\u003eAir Quality and Environmental Sensors:\u003cbr\u003eCCS811 Air Quality (CO2 and VOC)\u003cbr\u003eENS160 Indoor Air Quality Sensor (AQI, eCO2, TVOC)\u003cbr\u003ePASCO2V01 Photoacoustic Spectroscopy (CO2)\u003cbr\u003eSGP30 Air Quality (TVOC, CO2, H2, Ethanol)\u003cbr\u003eSGP40 Air Quality (VOC, Humidity, Temperature)\u003cbr\u003eSCD30 CO2, Humidity, and Temperature\u003cbr\u003eSCD40 CO2, Humidity, and Temperature\u003cbr\u003eBME680 Air Quality (Pressure, Humidity, Temperature, Gas, VOCs)\u003cbr\u003eBME688 Air Quality (Pressure, Humidity, Temperature, Gas, VOCs, VSC, CO, Gas)\u003cbr\u003eFS3000 Air Velocity\u003cbr\u003eSEN54 Environmental Sensor Node (Particle, VOC, Humidity, and Temperature)\u003cbr\u003eSTC31 CO2 and Temperature sensor\u003cbr\u003eVEML6075 UV\u003cbr\u003eVEML7700 Ambient Light and Lux\u003cbr\u003eOPT4048DTSR Tristimulus Color and Mini\u003cbr\u003eAS7265x Triad Spectroscopy\u003cbr\u003eTemperature:\u003cbr\u003eAMG8833 Grid-EYE Infrared Array\u003cbr\u003eMCP9600 Thermocouple Amplifier\u003cbr\u003ePT100 ADS122C04 PR Temperature\u003cbr\u003eTMP117 High Precision Temperature\u003cbr\u003ePower:\u003cbr\u003eACS37800 Power Meter\u003cbr\u003eMAX17048 Li-Po Battery Fuel Gauge (Built-in via I2C)\u003cbr\u003eReal-Time Clock:\u003cbr\u003eRV8803 RTC Module\u003cbr\u003eNFC\/RFID:\u003cbr\u003eST25DVxxKC Dynamic NFC\/RFID Tag\u003cbr\u003eBiometric Sensors:\u003cbr\u003eBiomedical Sensor Hub (MAX32664) with Pulse Oximeter and Heart Rate (MAX30101)\u003cbr\u003eWeight:\u003cbr\u003eNAU7802 Qwiic Scale Load Cell Amplifier\u003cbr\u003eMiscellaneous:\u003cbr\u003eQwiic Button\u003cbr\u003eQwiic Twist RGB Rotary Encoder\u003cbr\u003eAnalog Voltage:\u003cbr\u003eADS1015 12-bit 4-channel Differential ADC\u003cbr\u003eADS122C04 24-bit Differential ADC found on the PT100\u003cbr\u003eThe DataLogger IoT - 9DoF uses common microSD cards to record clear text, comma separated (i.e. CSV), or JavaScript Object Notation (JSON) files. You probably already have a microSD card laying around but if you need any additional units, see the related items. Note that the DataLogger IoT is not able to use any size microSD card. The DataLogger IoT supports 4-bit SDIO with microSD cards formatted as FAT32 as well as the older FAT16 (i.e. FAT) formats up to 32GB.\u003c\/p\u003e\n\u003cp\u003eLow-power logging is supported. The DataLogger IoT can be configured to take readings at about 26 times a second with the default sensors turned on, or as slow as 1 reading every 24 hours. You choose! The DataLogger IoT has built-in LiPo charging set at 500mA\/hr. When sleep mode is enabled, the resulting sleep current is approximately 200µA.\u003c\/p\u003e\n\u003cp\u003eWith a 2.4GHz WiFi connection, you can also send data to the cloud! The following IoT services are supported:\u003c\/p\u003e\n\u003cp\u003eMQTT Client\u003cbr\u003eMQTT Secure Client\u003cbr\u003eAWS IoT\u003cbr\u003eThingSpeak MQTT\u003cbr\u003eAzure IoT\u003cbr\u003eHTTP IoT\u003cbr\u003eMachineChat\u003cbr\u003eArduino Cloud\u003cbr\u003eNew features are constantly being added so we've developed two methods of updating the firmware on your DataLogger IoT! If you have a microSD card, you can download the firmware binary to the memory card and update the board through the configuration menu. If you have a WiFi connection, you can also update the firmware over the air using the configuration menu! No need to install Arduino or a bunch of libraries.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eESP32-WROOM-32E Module:\u003cbr\u003eIntegrated 802.11b\/g\/n WiFi 2.4GHz transceiver\u003cbr\u003eConfigurable via CH340C\u003cbr\u003ePower Specs:\u003c\/p\u003e\n\u003cp\u003e3.3V to 6.0V (via VIN)\u003cbr\u003e5V with USB (via 5V or USB type C)\u003cbr\u003e3.6V to 4.2V with LiPo battery (via BATT or 2-pin JST)\u003cbr\u003eBuilt-in MCP73831 single cell LiPo charger\u003cbr\u003eMinimum 500mA charge rate\u003cbr\u003e3.3V (via I2C)\u003cbr\u003eMAX17048 LiPo Fuel Gauge\u003cbr\u003ePorts\u003c\/p\u003e\n\u003cp\u003e1x USB type C\u003cbr\u003e1x JST style connector for LiPo battery\u003cbr\u003e2x Qwiic enabled I2C\u003cbr\u003e1x microSD socket\u003cbr\u003eSupport for 4-bit SDIO and microSD cards formatted to FAT32\u003cbr\u003eLEDs\u003c\/p\u003e\n\u003cp\u003eCharge (CHG)\u003cbr\u003eStatus (STAT)\u003cbr\u003e1-Wire B3DQ3BRG Addressable RGB\u003cbr\u003eJumpers\u003c\/p\u003e\n\u003cp\u003eMeasure\u003cbr\u003eRGB LED\u003cbr\u003eStatus LED\u003cbr\u003eCharge LED\u003cbr\u003eI2C pull-up resistors\u003cbr\u003eUSB Shield\u003cbr\u003eButtons\u003c\/p\u003e\n\u003cp\u003eReset\u003cbr\u003eBoot\u003cbr\u003eDimensions: 1.66in. x 2.00in.\u003c\/p\u003e\n\u003cp\u003eWeight: 10.65g\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51612620063022,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/DEV-20594-Datalogger-IoT-9DoF-New-Front.webp?v=1767856474"},{"product_id":"sparkfun-datalogger-iot","title":"SparkFun DataLogger IoT","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SparkFun DataLogger IoT is a data logger that comes preprogrammed to automatically log GPS and various pressure, humidity, and distance sensors. All without writing a single line of code! The DataLogger automatically detects, configures, and logs Qwiic sensors. It was specifically designed for users who just need to capture a lot of data to a CSV or JSON file and get back to their more extensive project. Save the data to a microSD card or send it wirelessly to your preferred Internet of Things (IoT) service!\u003c\/p\u003e\n\u003cp\u003eThis DataLogger IoT omits a built-in IMU. This version still supports auto-detection and logging of over a dozen sensors and GNSS receivers. Power up the DataLogger IoT, configure the board to record readings from supported devices, and begin logging! Data can be time-stamped when the time is synced to NTP, GNSS, or RTC.\u003c\/p\u003e\n\u003cp\u003eThe DataLogger IoT is highly configurable over an easy-to-use serial interface. Simply plug in a USB-C cable and open a serial terminal at 115200 baud. The logging output is automatically streamed to the terminal and the microSD card. Pressing any key in the terminal window will open the configuration menu.\u003c\/p\u003e\n\u003cp\u003eThe DataLogger IoT automatically scans, detects, configures, and logs various Qwiic sensors plugged into the board (No soldering! No programming!). Currently, auto-detection is supported on the following Qwiic products:\u003c\/p\u003e\n\u003cp\u003eAny u-Blox GNSS Modules (Lat\/Long, Altitude, Velocity, SIV, Time, Date) such as:\u003c\/p\u003e\n\u003cp\u003eZED-F9P 1cm High Precision GPS\u003cbr\u003eNEO-M8P-2 2.5cm High Precision GPS\u003cbr\u003eSAM-M10Q 1.5m GPS\u003cbr\u003eSAM-M8Q 1.5m 72 Channel GPS\u003cbr\u003eZOE-M8Q 1.5m Compact GPS\u003cbr\u003eNEO-M9N 1.5m GPS\u003cbr\u003eMAX-M10S 1.5m Ultra-Low Power GPS\u003cbr\u003eDistance:\u003c\/p\u003e\n\u003cp\u003eTMF8820 dToF Imager\u003cbr\u003eTMF8821 dToF Imager\u003cbr\u003eVCNL4040 Proximity and Lux\u003cbr\u003eVL53L1X Distance - 4 Meter\u003cbr\u003eVL53L4 Distance - 1.3 Meter\u003cbr\u003eVL53L5 ToF Imager\u003cbr\u003eSTHS34PF80 Human Presence and Motion and Mini\u003cbr\u003ePressure, Altitude, Humidity, and Temperature Data:\u003c\/p\u003e\n\u003cp\u003eBME280 Atmospheric\u003cbr\u003eLPS25HB Absolute Pressure\u003cbr\u003eMPR Series - MPRLS0025PA00001A MicroPressure\u003cbr\u003eMS8607 Pressure, Humidity, and Temperature\u003cbr\u003eMS5637 Barometric Pressure and Temperature\u003cbr\u003eAHT20 Humidity and Temperature\u003cbr\u003eSHTC3 Humidity and Temperature\u003cbr\u003eSDP31 Differential Pressure\u003cbr\u003eBMP384 Pressure and Temperature\u003cbr\u003eBMP581 Pressure and Temperature\u003cbr\u003eENS160\/BME280 Environmental Combo\u003cbr\u003eAir Quality and Environmental Sensors:\u003c\/p\u003e\n\u003cp\u003eCCS811 Air Quality (CO2 and VOC)\u003cbr\u003eENS160 Indoor Air Quality Sensor (AQI, eCO2, TVOC)\u003cbr\u003ePASCO2V01 Photoacoustic Spectroscopy (CO2)\u003cbr\u003eSGP30 Air Quality (TVOC, CO2, H2, Ethanol)\u003cbr\u003eSGP40 Air Quality (VOC, Humidity, Temperature)\u003cbr\u003eSCD30 CO2, Humidity, and Temperature\u003cbr\u003eSCD40 CO2, Humidity, and Temperature\u003cbr\u003eBME680 Air Quality (Pressure, Humidity, Temperature, Gas, VOCs)\u003cbr\u003eBME688 Air Quality (Pressure, Humidity, Temperature, Gas, VOCs, VSC, CO, Gas)\u003cbr\u003eFS3000 Air Velocity\u003cbr\u003eSEN54 Environmental Sensor Node (Particle, VOC, Humidity, and Temperature)\u003cbr\u003eSTC31 CO2 and Temperature sensor\u003cbr\u003eVEML6075 UV\u003cbr\u003eVEML7700 Ambient Light and Lux\u003cbr\u003eOPT4048DTSR Tristimulus Color and Mini\u003cbr\u003eAS7265x Triad Spectroscopy\u003cbr\u003eTemperature:\u003c\/p\u003e\n\u003cp\u003eAMG8833 Grid-EYE Infrared Array\u003cbr\u003eMCP9600 Thermocouple Amplifier\u003cbr\u003ePT100 ADS122C04 PR Temperature\u003cbr\u003eTMP117 High Precision Temperature\u003cbr\u003ePower:\u003c\/p\u003e\n\u003cp\u003eACS37800 Power Meter\u003cbr\u003eMAX17048 Li-Po Battery Fuel Gauge (Built-in via I2C)\u003cbr\u003eReal-Time Clock:\u003c\/p\u003e\n\u003cp\u003eRV8803 RTC Module\u003cbr\u003eNFC\/RFID:\u003c\/p\u003e\n\u003cp\u003eST25DVxxKC Dynamic NFC\/RFID Tag\u003cbr\u003eBiometric Sensors:\u003c\/p\u003e\n\u003cp\u003eBiomedical Sensor Hub (MAX32664) with Pulse Oximeter and Heart Rate (MAX30101)\u003cbr\u003eWeight:\u003c\/p\u003e\n\u003cp\u003eNAU7802 Qwiic Scale Load Cell Amplifier\u003cbr\u003eMiscellaneous:\u003c\/p\u003e\n\u003cp\u003eQwiic Button\u003cbr\u003eQwiic Twist RGB Rotary Encoder\u003cbr\u003eAnalog Voltage:\u003c\/p\u003e\n\u003cp\u003eADS1015 12-bit 4-channel Differential ADC\u003cbr\u003eADS122C04 24-bit Differential ADC found on the PT100\u003cbr\u003eThe DataLogger IoT uses standard microSD cards to record clear text, comma-separated (i.e., CSV), or JavaScript Object Notation (JSON) files. You probably already have a microSD card, but if you need additional units, see the related items. Note that the DataLogger IoT cannot use any size microSD card. The DataLogger IoT supports 4-bit SDIO with microSD cards formatted as FAT32 and the older FAT16 (i.e., FAT) formats up to 32GB.\u003c\/p\u003e\n\u003cp\u003eLow-power logging is supported. The DataLogger IoT can be configured to take readings about 26 times a second with the default sensors turned on or as slow as 1 reading every 24 hours. You choose! The DataLogger IoT has a built-in LiPo charging set at 500mA\/hr. When sleep mode is enabled, the resulting sleep current is approximately 200µA.\u003c\/p\u003e\n\u003cp\u003eWith a 2.4GHz WiFi connection, you can also send data to the cloud! The following IoT services are supported:\u003c\/p\u003e\n\u003cp\u003eMQTT Client\u003cbr\u003eMQTT Secure Client\u003cbr\u003eAWS IoT\u003cbr\u003eThingSpeak MQTT\u003cbr\u003eAzure IoT\u003cbr\u003eHTTP IoT\u003cbr\u003eMachineChat\u003cbr\u003eArduino Cloud\u003cbr\u003eNew features are constantly being added, so we've developed two methods of updating the firmware on your DataLogger IoT! If you have a microSD card, you can download the firmware binary to the memory card and update the board through the configuration menu. If you have a WiFi connection, you can also update the firmware over the air using the configuration menu! No need to install Arduino or a bunch of libraries.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eESP32-WROOM-32E Module:\u003cbr\u003eIntegrated 802.11b\/g\/n WiFi 2.4GHz transceiver\u003cbr\u003eConfigurable via CH340C\u003cbr\u003ePower Specs:\u003c\/p\u003e\n\u003cp\u003e3.3V to 6.0V (via VIN)\u003cbr\u003e5V with USB (via 5V or USB type C)\u003cbr\u003e3.6V to 4.2V with LiPo battery (via BATT or 2-pin JST)\u003cbr\u003eBuilt-in MCP73831 single cell LiPo charger\u003cbr\u003eMinimum 500mA charge rate\u003cbr\u003e3.3V (via I2C)\u003cbr\u003eMAX17048 LiPo Fuel Gauge\u003cbr\u003ePorts\u003c\/p\u003e\n\u003cp\u003e1x USB type C\u003cbr\u003e1x JST style connector for LiPo battery\u003cbr\u003e2x Qwiic enabled I2C\u003cbr\u003e1x microSD socket\u003cbr\u003eSupport for 4-bit SDIO and microSD cards formatted to FAT32\u003cbr\u003eLEDs\u003c\/p\u003e\n\u003cp\u003eCharge (CHG)\u003cbr\u003eStatus (STAT)\u003cbr\u003e1-Wire B3DQ3BRG Addressable RGB\u003cbr\u003eJumpers\u003c\/p\u003e\n\u003cp\u003eMeasure\u003cbr\u003eRGB LED\u003cbr\u003eStatus LED\u003cbr\u003eCharge LED\u003cbr\u003eI2C pull-up resistors\u003cbr\u003eUSB Shield\u003cbr\u003eButtons\u003c\/p\u003e\n\u003cp\u003eReset\u003cbr\u003eBoot\u003cbr\u003eDimensions: 1.66in. x 2.00in.\u003c\/p\u003e\n\u003cp\u003eWeight: 10.65g\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51612650209582,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/22462-_DEV-_03.webp?v=1767856660"},{"product_id":"sparkfun-xbee-explorer-usb","title":"SparkFun XBee Explorer USB","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a simple to use, USB to serial base unit for the Digi XBee line. This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. Plug the unit into the XBee Explorer, attach a mini USB cable, and you will have direct access to the serial and programming pins on the XBee unit.\u003c\/p\u003e\n\u003cp\u003eThe highlight of this board is an FT231X USB-to-Serial converter. That’s what translates data between your computer and the XBee. There’s also a reset button, and a voltage regulator to supply the XBee with plenty of power. In addition, there are four LEDs that’ll help if you ever need to debug your XBee: RX, TX, RSSI (signal-strength indicator), and power indicator.\u003c\/p\u003e\n\u003cp\u003eThis board also breaks out each of the XBee’s I\/O pins to a pair of breadboard-compatible headers. So if you want to make use of the XBee’s extended functionality, you can solder some header pins into those, or even just solder some wire.\u003c\/p\u003e\n\u003cp\u003eNot sure which XBee module or accessory is right for you? Check out our XBee Buying Guide!\u003c\/p\u003e\n\u003cp\u003eNote: There is no XBee included with this Explorer USB. Check the Recommended Products section below for different options.\u003c\/p\u003e\n\u003cp\u003eNote: This board cannot source the power required for the Cellular XBee line. It will only work with the 802.15.4 variants.\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51612657254702,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/11812-SparkFun_XBee_Explorer_USB-00.webp?v=1767856906"},{"product_id":"sparkfun-xbee-explorer-dongle","title":"SparkFun XBee Explorer Dongle","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis board also breaks out each of the XBee’s I\/O pins to a pair of breadboard-compatible headers. So if you want to make use of the XBee’s extended functionality, you can solder some header pins into those, or even just solder some wire.\u003c\/p\u003e\n\u003cp\u003eNot sure which XBee module or accessory is right for you? Check out our XBee Buying Guide!\u003c\/p\u003e\n\u003cp\u003eNote: There is no XBee included with this Explorer Dongle. Check the Recommended Products section below for different options.\u003c\/p\u003e\n\u003cp\u003eNote: This board cannot source the power required for the Cellular XBee line. It will only work with the 802.15.4 variants.\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51612657746222,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/11697-04b.webp?v=1767857057"},{"product_id":"sparkfun-xbee-explorer-serial","title":"SparkFun XBee Explorer Serial","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SparkFun XBee Explorer Serial is a simple to use, RS232 to serial base unit for the XBee line. This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. Just plug the unit into the XBee Explorer, attach a RS232 cable, and you will have direct access to the serial and programming pins on the XBee unit. The board also supports DTR communication so you can reprogram and configure the XBee unit.\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51612659548462,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/13225-05.webp?v=1767857294"},{"product_id":"sparkfun-xbee-explorer-regulated","title":"SparkFun XBee Explorer Regulated","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SparkFun XBee Explorer Regulated takes care of the 3.3V regulation, signal conditioning, and basic activity indicators (Power, RSSI and DIN\/DOUT activity LEDs). It translates the 5V serial signals to 3.3V so that you can connect a 5V (down to 3.3V) system to any XBee module. The board was conveniently designed to mate directly with the SparkFun Arduino Pro series of boards for wireless bootloading and USB based configuration.\u003c\/p\u003e\n\u003cp\u003eThis unit works with all XBee modules including the Series 1 and 2, standard and Pro versions. Plug an XBee into this breakout and you will have direct access to the serial and programming pins on the XBee unit and will be able to power the XBee with 5V.\u003c\/p\u003e\n\u003cp\u003eThis board comes fully populated with 3.3V regulator (5V max input), XBee socket, four status LEDs, and level shifting. In the latest revision the diode level shifter is replaced with a more robust MOSFET level shifter. This board does not include and XBee module. XBee modules sold below.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis board cannot source the power required for the Cellular XBee line. It will only work with the 802.15.4 variants.\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51612660302126,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/11373-04.webp?v=1767857444"},{"product_id":"sparkfun-esp32-thing","title":"SparkFun ESP32 Thing","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SparkFun ESP32 Thing is a comprehensive development platform for Espressif’s ESP32, their super-charged version of the popular ESP8266. Like the 8266, the ESP32 is a WiFi-compatible microcontroller but adds nearly 30 I\/O pins. The ESP32’s power and versatility will make it the foundation of IoT and connected projects for many years to come.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eWhy the name? We lovingly call it the “Thing” because it's the perfect foundation for your Internet of Things project. The Thing does everything from turning on an LED to posting data with your chosen platform, and can be programmed just like any microcontroller. You can even program the Thing through the Arduino IDE by installing the ESP32 Arduino Core.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe SparkFun ESP32 Thing equips the ESP32 with everything necessary to program, run and develop on the wonderchip. In addition to the WiFi SoC, the Thing includes an FTDI FT231x, which converts USB to serial, and allows your computer to program and communicate with the microcontroller. It also features a LiPo charger, so your ESP32 project can be battery-powered and truly wireless. Additionally, the board includes a handful of LEDs and buttons to aid in your development.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDual-core Tensilica LX6 microprocessor\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUp to 240MHz clock frequency\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e520kB internal SRAM\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntegrated 802.11 BGN WiFi transceiver\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e3.0 to 3.6V operating range\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2.5 µA sleep current under hibernation\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e28 GPIO\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e10-electrode capacitive touch support\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHardware accelerated encryption (AES, SHA2, ECC, RSA-4096)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e4MB Flash memory\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntegrated LiPo Battery Charger\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51612662366510,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/13907-02.webp?v=1767857618"},{"product_id":"sparkfun-thing-plus-esp32-wroom-micro-b","title":"SparkFun Thing Plus - ESP32 WROOM (Micro-B)","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SparkFun ESP32 Thing Plus is the next step to get started with Espressif IoT ideations while still enjoying all the amenities of the original ESP32 Thing. Espressif's ESP32 WROOM is a powerful WiFi and Bluetooth MCU module that targets a wide variety of applications. At the core of this module is the ESP32-D0WDQ6 chip which is designed to be both scalable and adaptive. To make the Thing Plus even easier to use, we've moved a few pins around to make the board Feather compatible and it utilizes our handy Qwiic Connect System which means no soldering or shields are required to connect it to the rest of your system!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eWhy the name? We lovingly call it the “Thing” because it's the perfect foundation for your Internet of Things project. The Thing does everything from turning on an LED to posting data with your chosen platform, and can be programmed just like any microcontroller. You can even program the Thing through the Arduino IDE by installing the updated ESP32 Arduino Core.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe ESP32 Thing plus integrates a rich set of peripherals, ranging from capacitive touch sensors, SD card interface, Ethernet, high-speed SPI, UART, I2S and I2C. Thanks to the onboard ESP32 WROOM module, the SparkFun Thing Plus features 16MB of flash memory, 520kB of internal SRAM, an integrated 802.11 BGN WiFi transceiver and dual-mode Bluetooth capabilities, and a JST connector to plug in a LiPo battery.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSparkFun Thing Plus - ESP32 WROOM\u003cbr\u003eESP32 WROOM Module\u003cbr\u003e21 Multifunctional GPIO\u003cbr\u003eUp to thirteen 12-bit ADC Channels\u003cbr\u003eUp to two DAC channels\u003cbr\u003eUp to sixteen PWM outputs\u003cbr\u003eUp to eight capacitive touch pins\u003cbr\u003eUp to three SPI Busses (only one is configured by default in the Arduino IDE)\u003cbr\u003eAn available I2S Audio Output\u003cbr\u003eUp to two I2C Busses (only one is configured by default in the Arduino IDE)\u003cbr\u003eUp to two UARTs (only two are configured by default in the Arduino IDE, one UART is used for bootloading\/debug)\u003cbr\u003eThing Plus (or Feather) Form-Factor:\u003cbr\u003eDimensions: 2.55\" x 0.9\"\u003cbr\u003eTwo Mounting Holes:\u003cbr\u003e4-40 screw compatible\u003cbr\u003e28 PTH Pins\u003cbr\u003emicro-B USB Connector\u003cbr\u003e2-pin JST Connector for a LiPo Battery (not included)\u003cbr\u003e4-pin JST Qwiic Connector\u003cbr\u003eLEDs:\u003cbr\u003eCHG - Yellow battery charging indicator\u003cbr\u003e13 - Blue status\/test LED\u003cbr\u003eButtons:\u003cbr\u003e0\u003cbr\u003eReset\u003cbr\u003eESP32 WROOM General Features:\u003c\/p\u003e\n\u003cp\u003eOperating Voltage: 2.3 to 3.6 V\u003cbr\u003e2.5 µA deep sleep current\u003cbr\u003e80 mA average operating current\u003cbr\u003eOpterating Temperature: -40 to 85 °C\u003cbr\u003eXtensa® Dual-Core 32-bit LX6 Microprocessor (up to 240MHz)\u003cbr\u003e448KB of ROM and 520KB SRAM\u003cbr\u003e16MB of Embedded SPI flash storage\u003cbr\u003eIntegrated 802.11b\/g\/n WiFi 2.4GHz transceiver\u003cbr\u003eIntegrated dual-mode Bluetooth (classic and BLE)\u003cbr\u003eHardware accelerated encryption (AES, SHA2, ECC, RSA-4096)\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51612703293742,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/15663-SparkFun_Thing_Plus_-_ESP32_WROOM-04.webp?v=1767857798"},{"product_id":"breakout-board-for-xbee-module","title":"Breakout Board for XBee Module","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a simple breakout board for the popular XBee product from Digi. This board breaks out all 20 pins of the XBee to a 0.1\" standard spacing dual row header. The spacing between 0.1\" headers is 0.5\" making it breadboard DIP friendly. We highly recommend using the female sockets to avoid having to solder the XBee permanently to the breakout board. This is the PCB only. Please order the accompanying 2mm sockets (you'll need 2!) and 0.1\" headers below.\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51612712534318,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/08276-breakout-for-xbee-front.webp?v=1767858429"},{"product_id":"sparkfun-thing-plus-esp32-wroom-usb-c","title":"SparkFun Thing Plus - ESP32 WROOM (USB-C)","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SparkFun ESP32 WROOM Thing Plus with USB-C is a great place to get started with Espressif IoT ideations while still enjoying all the amenities of the original ESP32 WROOM Thing Plus. Espressif's ESP32 WROOM is a powerful WiFi and Bluetooth® MCU module that targets a wide variety of applications. At the core of this module is the ESP32-D0WDQ6 chip which is designed to be both scalable and adaptive. To make the Thing Plus as easy to use as possible, we've made the board Feather-compatible and it utilizes our handy Qwiic Connect System which means no soldering or shields are required to connect it to the rest of your system!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe SparkFun ESP32 WROOM Thing Plus with USB-C provides a few enhancements to the previous ESP32 Thing Plus. In addition to the standard Thing Plus form factor, we have included a µSD card slot, upgraded to a USB-C connector, integrated a RGB status LED and battery fuel gauge, and provided two voltage regulators; a separate 700mA current source for the board and Qwiic connector. It's also important to point out that a CH340C serial-to-UART bridge is used on this board; unlike previous variants.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe ESP32 Thing plus integrates a rich set of peripherals, ranging from capacitive touch sensors, SD card interface, Ethernet, high-speed SPI, UART, I2S and I2C, etc. The module also features 16MB of flash memory, 520kB of internal SRAM, an integrated 802.11 b\/g\/n WiFi transceiver with dual-mode Bluetooth® capabilities, and a JST connector to plug in a LiPo battery.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSparkFun Thing Plus - ESP32 WROOM\u003cbr\u003eESP32-WROOM Module\u003cbr\u003e21 Multifunctional GPIO\u003cbr\u003eUp to thirteen 12-bit ADC Channels\u003cbr\u003eUp to two DAC channels\u003cbr\u003eUp to sixteen PWM outputs\u003cbr\u003eUp to eight capacitive touch pins\u003cbr\u003eUp to three SPI Busses (only one is configured by default in the Arduino IDE)\u003cbr\u003eAn available I2S Audio Output\u003cbr\u003eUp to two I2C Busses (only one is configured by default in the Arduino IDE)\u003cbr\u003eUp to three UARTs (only two are configured by default in the Arduino IDE, one UART is used for bootloading\/debug)\u003cbr\u003eThing Plus (or Feather) Form-Factor:\u003cbr\u003eDimensions: 2.55\" x 0.9\"\u003cbr\u003eFour Mounting Holes:\u003cbr\u003e4-40 screw compatible\u003cbr\u003e28 PTH Pins\u003cbr\u003eUSB-C Connector\u003cbr\u003e2-pin JST Connector for a LiPo Battery (not included)\u003cbr\u003e4-pin JST Qwiic Connector\u003cbr\u003eSD Card Slot\u003cbr\u003eMAX17048 Fuel Gauge\u003cbr\u003eLEDs:\u003cbr\u003ePWR - Red power LED\u003cbr\u003eCHG - Yellow battery charging indicator\u003cbr\u003eSTAT - Blue status LED\u003cbr\u003eWS2812 RGB LED\u003cbr\u003eButtons:\u003cbr\u003eBOOT\u003cbr\u003eRST\u003cbr\u003eOperating Voltage: 2.3 to 3.6 V\u003cbr\u003e2.5 µA deep sleep current\u003cbr\u003e80 mA average operating current\u003cbr\u003eOperating Temperature: -40 to 85 °C\u003cbr\u003eXtensa® Dual-Core 32-bit LX6 Microprocessor (up to 240MHz)\u003cbr\u003e448KB of ROM and 520KB SRAM\u003cbr\u003e16MB of Embedded SPI flash storage\u003cbr\u003eIntegrated 802.11b\/g\/n WiFi 2.4GHz transceiver\u003cbr\u003eIntegrated dual-mode Bluetooth® (classic and BLE®)\u003cbr\u003eHardware accelerated encryption (AES, SHA2, ECC, RSA-4096)\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51612715778350,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/20168Front.webp?v=1767858595"},{"product_id":"sparkfun-thing-plus-esp32-wroom-u-fl","title":"SparkFun Thing Plus - ESP32 WROOM (U.FL)","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SparkFun ESP32 Thing Plus with U.FL is the next step to get started with Espressif IoT ideations while still enjoying all the amenities of the original ESP32 Thing. Espressif's ESP32 WROOM is a powerful WiFi and Bluetooth MCU module that targets a wide variety of applications. At the core of this module is the ESP32-D0WDQ6 chip which is designed to be both scalable and adaptive. To make the Thing Plus even easier to use, we've moved a few pins around to make the board Feather compatible and it utilizes our handy Qwiic Connect System which means no soldering or shields are required to connect it to the rest of your system!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eWhy the name? We lovingly call it the “Thing” because it's the perfect foundation for your Internet of Things project. The Thing does everything from turning on an LED to posting data with your chosen platform, and can be programmed just like any microcontroller. You can even program the Thing through the Arduino IDE by installing the updated ESP32 Arduino Core.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe ESP32 Thing plus integrates a rich set of peripherals, ranging from capacitive touch sensors, SD card interface, Ethernet, high-speed SPI, UART, I2S and I2C. Thanks to the onboard ESP32 WROOM module, the SparkFun Thing Plus features 16MB of flash memory, 520kB of internal SRAM, an integrated 802.11 BGN WiFi transceiver and dual-mode Bluetooth capabilities, a JST connector to plug in a LiPo battery, and a U.FL connector for your own antenna.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSparkFun Thing Plus - ESP32 WROOM (U.FL)\u003cbr\u003eESP32 WROOM (U.FL) Module\u003cbr\u003e21 Multifunctional GPIO\u003cbr\u003eUp to thirteen 12-bit ADC Channels\u003cbr\u003eUp to two DAC channels\u003cbr\u003eUp to sixteen PWM outputs\u003cbr\u003eUp to eight capacitive touch pins\u003cbr\u003eUp to three SPI Busses (only one is configured by default in the Arduino IDE)\u003cbr\u003eAn available I2S Audio Output\u003cbr\u003eUp to two I2C Busses (only one is configured by default in the Arduino IDE)\u003cbr\u003eUp to two UARTs (only two are configured by default in the Arduino IDE, one UART is used for bootloading\/debug)\u003cbr\u003eThing Plus (or Feather) Form-Factor:\u003cbr\u003eDimensions: 2.55\" x 0.9\"\u003cbr\u003eFour Mounting Holes:\u003cbr\u003e4-40 screw compatible\u003cbr\u003e28 PTH Pins\u003cbr\u003emicro-B USB Connector\u003cbr\u003e2-pin JST Connector for a LiPo Battery (not included)\u003cbr\u003e4-pin JST Qwiic Connector\u003cbr\u003eLEDs:\u003cbr\u003eCHG - Yellow battery charging indicator\u003cbr\u003e13 - Blue status\/test LED\u003cbr\u003eButtons:\u003cbr\u003e0\u003cbr\u003eReset\u003cbr\u003eU.FL Connector\u003cbr\u003eESP32 WROOM (U.FL) General Features:\u003c\/p\u003e\n\u003cp\u003eOperating Voltage: 2.3 to 3.6 V\u003cbr\u003e2.5 µA deep sleep current\u003cbr\u003e80 mA average operating current\u003cbr\u003eOpterating Temperature: -40 to 85 °C\u003cbr\u003eXtensa® Dual-Core 32-bit LX6 Microprocessor (up to 240MHz)\u003cbr\u003e448KB of ROM and 520KB SRAM\u003cbr\u003e16MB of Embedded SPI flash storage\u003cbr\u003eIntegrated 802.11b\/g\/n WiFi 2.4GHz transceiver\u003cbr\u003eIntegrated dual-mode Bluetooth (classic and BLE)\u003cbr\u003eHardware accelerated encryption (AES, SHA2, ECC, RSA-4096)\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51612728066350,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/17381-SparkFun_Thing_Plus_-_ESP32_WROOM__U.FL_-04.webp?v=1767859700"},{"product_id":"sparkfun-thing-plus-matter-mgm240p","title":"SparkFun Thing Plus Matter - MGM240P","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SparkFun Thing Plus Matter is the first easily accessible board of its kind that combines Matter and SparkFun’s Qwiic ecosystem for agile development and prototyping of Matter-based IoT devices. The MGM240P wireless module from Silicon Labs® provides secure connectivity for both 802.15.4 with Mesh communication (Thread) and Bluetooth® Low Energy 5.3 protocols. The module comes ready for integration into Silicon Labs' Matter IoT protocol for home automation. SparkFun's Thing Plus development boards are Feather-compatible and include a Qwiic connector for easy integration into our Qwiic Connect System for solderless I2C circuits.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMGM240P Wireless Module\u003cbr\u003eBuilt around the EFR32MG24 Wireless SoC\u003cbr\u003e32-bit ARM-M33 Core Processor (@39MHz)\u003cbr\u003e1536kB Flash Memory\u003cbr\u003e256kB RAM\u003cbr\u003eSupports Multiple 802.15.4 Wireless Protocols (Zigbee and OpenThread)\u003cbr\u003eBluetooth Low Energy 5.3\u003cbr\u003eMatter-ready\u003cbr\u003eSecure Vault Support\u003cbr\u003eBuilt-in Antenna\u003cbr\u003eThing Plus Form-Factor (Feather-compatible):\u003cbr\u003eDimensions: 2.30\" x 0.9\"\u003cbr\u003eTwo Mounting Holes:\u003cbr\u003e4-40 screw compatible\u003cbr\u003eTwenty One GPIO PTH Breakouts\u003cbr\u003eAll pins have complete multiplexing capability through software\u003cbr\u003eSPI, I2C and UART interfaces mapped by default to labeled pins\u003cbr\u003eThirteen GPIO (Six labeled as Analog, seven labeled for GPIO)\u003cbr\u003eAll function as either GPIO or Analog\u003cbr\u003eBuilt-in-Digital to Analog Converter (DAC)\u003cbr\u003eUSB-C Connector\u003cbr\u003e2-Pin JST LiPo Battery Connector for a LiPo Battery (not included)\u003cbr\u003e4-Pin JST Qwiic Connector\u003cbr\u003eMC73831 Single-Cell LiPo Charger\u003cbr\u003eConfigurable charge rate (500mA Default, 100mA Alternate)\u003cbr\u003eMAX17048 Single-Cell LiPo Fuel Gauge\u003cbr\u003eµSD Card Slot\u003cbr\u003eLow Power Consumption (15µA when MGM240P is in Low Power Mode)\u003cbr\u003eLEDs:\u003cbr\u003ePWR - Red Power LED\u003cbr\u003eCHG - Yellow battery charging status LED\u003cbr\u003eSTAT - Blue status LED\u003cbr\u003eReset Button:\u003cbr\u003ePhysical push-button\u003cbr\u003eReset signal can be tied to A0 to enable use as a peripheral device\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51612739666222,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/MGM240P_Thing_Plus-_02.webp?v=1767860461"},{"product_id":"espressif-border-router-esp-thread-br-zigbee-gw","title":"Espressif Border Router - ESP Thread BR-Zigbee GW","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEspressif Thread Border Router is based on the combination of Espressif’s Wi-Fi and 802.15.4 SoCs, built on the ESP-IDF and open-source OpenThread stack. This solution has obtained the Thread 1.3 Certified Component Certificate issued by the Thread Group, complying with the latest Thread 1.3 standard, and supporting Matter application scenario. It supports all fundamental network features to build a Thread Border Router and integrates rich product level features for quick productization.\u003c\/p\u003e\n\u003cp\u003eFunctionality includes bi-directional IPv6 Connectivity, Service Discovery, and Multicast Forwarding among other features.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBi-directional IPv6 Connectivity\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eService Discovery\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMulticast Forwarding\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNAT64\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRCP update\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRF coexistence\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeb GUI\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Espressif","offers":[{"title":"Default Title","offer_id":51612743762222,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/WRL-25497-Espressif-Boarder-Router-ESP-Thread-BR-Zigbee-Feasture.webp?v=1767860634"},{"product_id":"esp32-c6-mini-module-4mb-pcb-antenna","title":"ESP32-C6 MINI Module - 4MB (PCB Antenna)","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eESP32-C6 is Espressif’s first WiFi 6 SoC integrating 2.4 GHz WiFi 6, Bluetooth 5 (LE) and the 802.15.4 protocol. It features an industry-leading RF performance, with reliable security features and multiple memory resources for IoT products. It consists of a high-performance (HP) 32-bit RISC-V processor, which can be clocked up to 160 MHz and a low-power (LP) 32-bit RISC-V processor, which can be clocked up to 20 MHz. It has a 320KB ROM, a 512KB SRAM, and works with external flash. It comes with 30 (QFN40) or 22 (QFN32) programmable GPIOs, with support for SPI, UART, I2C, I2S, RMT, TWAI, PWM, SDIO, Motor Control PWM. It also packs a 12-bit ADC and a temperature sensor.\u003c\/p\u003e\n\u003cp\u003eThe ESP32-C6 has integrated 2.4 GHz Wi-Fi 6 (802.11ax) radio, and also supports the 802.11b\/g\/n standard for backward compatibility. ESP32-C6 supports the OFDMA mechanism for both uplink and downlink communications, while also supporting MU-MIMO for downlink traffic. Both of these techniques allow working with high efficiency and low latency, even in congested wireless environments. It also combines 2.4 GHz Wi-Fi (802.11 b\/g\/n\/ax), Bluetooth 5 (LE), and IEEE 802.15.4 radio connectivity, which is vital for making the Thread and Zigbee protocols available in a variety of cases of application development.\u003c\/p\u003e\n\u003cp\u003eThe ESP32-C6’s support for IEEE 802.15.4 and Wi-Fi radios, along with Bluetooth 5 (LE) connectivity, enable customers to build Matter-compliant Wi-Fi end-point devices and Thread end-point devices, thus achieving interoperability in smart-home devices from multiple brands.\u003c\/p\u003e\n\u003cp\u003eThe Mini module is a smaller variation of the standard WROOM module with 1 less GPIO than the WROOM module.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMCU\u003cbr\u003eESP32-C6 embedded, 32bit RISC-V Single Core microprocessor, up to 160MHz\u003cbr\u003e320KB ROM\u003cbr\u003e512KB HP SRAM\u003cbr\u003e16KB LP SRAM\u003c\/p\u003e\n\u003cp\u003eWi-Fi\u003c\/p\u003e\n\u003cp\u003e1T1R in 2.4 GHz band\u003cbr\u003eOperating frequency: 2412 ~ 2484 MHz\u003cbr\u003eIEEE 802.11ax-compliant\u003cbr\u003eFully compatible with IEEE 802.11b\/g\/n protocol\u003c\/p\u003e\n\u003cp\u003eBluetooth\u003c\/p\u003e\n\u003cp\u003eBluetooth LE: Bluetooth 5.3 certified\u003cbr\u003eBluetooth mesh\u003cbr\u003eHigh power mode (20 dBm)\u003cbr\u003eSpeed: 125 Kbps, 500 Kbps, 1 Mbps, 2 Mbps\u003cbr\u003eAdvertising extensions\u003cbr\u003eMultiple advertisement sets\u003cbr\u003eChannel selection algorithm #2\u003cbr\u003eLE power control\u003cbr\u003eInternal co-existence mechanism between Wi-Fi and Bluetooth to share the same antenna\u003c\/p\u003e\n\u003cp\u003eIEEE 802.15.4\u003c\/p\u003e\n\u003cp\u003eCompliant with IEEE 802.15.4-2015 protocol\u003cbr\u003eOQPSK PHY in 2.4 GHz band\u003cbr\u003eData rate: 250 Kbps\u003cbr\u003eThread 1.3\u003cbr\u003eZigbee 3.0\u003c\/p\u003e\n\u003cp\u003eHardware\u003c\/p\u003e\n\u003cp\u003eInterfaces: GPIO, SPI, parallel IO interface, UART, I2C, I2S, RMT (TX\/RX), pulse counter, LED PWM, USB Serial\/JTAG controller, MCPWM, SDIO2.0 slave controller, GDMA, TWAI® controller, on-chip debug functionality via JTAG, event task matrix, ADC, temperature sensor, system timer, general-purpose timers, and watchdog timers\u003cbr\u003e40 MHz crystal oscillator\u003cbr\u003eSPI flash\u003cbr\u003eOn-board PCB antenna\u003c\/p\u003e\n\u003cp\u003eRoHS\/REACH certified\u003c\/p\u003e\n\u003cp\u003eFCC\/CE-RED\/SRRC Certified (RF)\u003c\/p\u003e","brand":"Espressif","offers":[{"title":"Default Title","offer_id":51612745531694,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/WRL-24807-ESP32-C6-MINI-Module-4MB-_PCB_Antenna_-Front.webp?v=1767860967"},{"product_id":"esp32-c6-wroom-module-16mb-pcb-antenna","title":"ESP32-C6 WROOM Module - 16MB (PCB Antenna)","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eESP32-C6 is Espressif’s first WiFi 6 SoC integrating 2.4 GHz WiFi 6, Bluetooth 5 (LE) and the 802.15.4 protocol. It features an industry-leading RF performance, with reliable security features and multiple memory resources for IoT products. It consists of a high-performance (HP) 32-bit RISC-V processor, which can be clocked up to 160 MHz and a low-power (LP) 32-bit RISC-V processor, which can be clocked up to 20 MHz. It has a 320KB ROM, a 512KB SRAM, and works with external flash. It comes with 30 (QFN40) or 22 (QFN32) programmable GPIOs, with support for SPI, UART, I2C, I2S, RMT, TWAI, PWM, SDIO, Motor Control PWM. It also packs a 12-bit ADC and a temperature sensor.\u003c\/p\u003e\n\u003cp\u003eThe ESP32-C6 has integrated 2.4 GHz WiFi 6 (802.11ax) radio, and also supports the 802.11b\/g\/n standard for backward compatibility. ESP32-C6 supports the OFDMA mechanism for both uplink and downlink communications, while also supporting MU-MIMO for downlink traffic. Both of these techniques allow working with high efficiency and low latency, even in congested wireless environments. It also combines 2.4 GHz WiFi (802.11 b\/g\/n\/ax), Bluetooth 5 (LE), and IEEE 802.15.4 radio connectivity, which is vital for making the Thread and Zigbee protocols available in a variety of cases of application development.\u003c\/p\u003e\n\u003cp\u003eThe ESP32-C6’s support for IEEE 802.15.4 and Wi-Fi radios, along with Bluetooth 5 (LE) connectivity, enable customers to build Matter-compliant Wi-Fi end-point devices and Thread end-point devices, thus achieving interoperability in smart-home devices from multiple brands.\u003c\/p\u003e\n\u003cp\u003eThis specific variation of the module features 16MB of flash memory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMCU\u003cbr\u003eESP32-C6 embedded, 32bit RISC-V Single Core microprocessor, up to 160MHz\u003cbr\u003e320KB ROM\u003cbr\u003e512KB HP SRAM\u003cbr\u003e16KB LP SRAM\u003c\/p\u003e\n\u003cp\u003eWi-Fi\u003c\/p\u003e\n\u003cp\u003e1T1R in 2.4 GHz band\u003cbr\u003eOperating frequency: 2412 ~ 2484 MHz\u003cbr\u003eIEEE 802.11ax-compliant\u003cbr\u003eFully compatible with IEEE 802.11b\/g\/n protocol\u003c\/p\u003e\n\u003cp\u003eBluetooth\u003c\/p\u003e\n\u003cp\u003eBluetooth LE: Bluetooth 5.3 certified\u003cbr\u003eBluetooth mesh\u003cbr\u003eHigh power mode (20 dBm)\u003cbr\u003eSpeed: 125 Kbps, 500 Kbps, 1 Mbps, 2 Mbps\u003cbr\u003eAdvertising extensions\u003cbr\u003eMultiple advertisement sets\u003cbr\u003eChannel selection algorithm #2\u003cbr\u003eLE power control\u003cbr\u003eInternal co-existence mechanism between Wi-Fi and Bluetooth to share the same antenna\u003c\/p\u003e\n\u003cp\u003eIEEE 802.15.4\u003c\/p\u003e\n\u003cp\u003eCompliant with IEEE 802.15.4-2015 protocol\u003cbr\u003eOQPSK PHY in 2.4 GHz band\u003cbr\u003eData rate: 250 Kbps\u003cbr\u003eThread 1.3\u003cbr\u003eZigbee 3.0\u003c\/p\u003e\n\u003cp\u003eHardware\u003c\/p\u003e\n\u003cp\u003eInterfaces: GPIO, SPI, parallel IO interface, UART, I2C, I2S, RMT (TX\/RX), pulse counter, LED PWM, USB Serial\/JTAG controller, MCPWM, SDIO2.0 slave controller, GDMA, TWAI® controller, on-chip debug functionality via JTAG, event task matrix, ADC, temperature sensor, system timer, general-purpose timers, and watchdog timers\u003cbr\u003e40 MHz crystal oscillator\u003cbr\u003eSPI flash\u003cbr\u003eOn-board PCB antenna\u003c\/p\u003e\n\u003cp\u003eRoHS\/REACH certified\u003c\/p\u003e\n\u003cp\u003eFCC\/CE-RED\/SRRC Certified (RF)\u003c\/p\u003e","brand":"Espressif","offers":[{"title":"Default Title","offer_id":51612746252590,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/WRL-24806-ESP32-C6-WROOM-Module-16MB-_PCB_Antenna_-Front-1.webp?v=1767861112"},{"product_id":"sparkfun-thing-plus-esp32-s3","title":"SparkFun Thing Plus - ESP32-S3","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SparkFun ESP32-S3 Thing Plus adds a powerful and versatile IoT development platform to the Thing Plus product line. It features the ESP32 WROOM-S3 MINI wireless module from espressif™. The ESP32 WROOM-S3 is built around an Xtensa® 32-bit LX7 processor with massive processing power that operates up to 240 MHz. It supports 2.4 GHz WiFi and Bluetooth® 5 (LE) with a built-in PCB antenna. This version of the ESP32-S3 has 4MB Flash memory and 2MB of dynamic\/PSRAM, and the board also has a microSD card slot for those who need more storage space.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe module has many peripherals, including UART, I2C, SPI, LCD control, SDIO host, TWAI® controller (compatible with ISO 11898-1, i.e., CAN Specification 2), and more. The module allows for customizing which GPIO pins these peripherals operate on though some are limited to specific pins. The ESP32-S3 can run two USB ports simultaneously and can even act as a USB host host device.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe Thing Plus footprint breaks out 21 of the ESP32-S3's GPIO pins along with the ESP32's Reset and Enable signals to a pair of 0.1in.-spaced plated through hole (PTH) headers. The available GPIO pins include twelve unassigned GPIO with six analog-capable pins as well as GPIO assigned to UART, I2C, and SPI interfaces. Refer to the pin labels on the board or the schematic for complete details on the pin functions.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe board also has a USB-C connector for primary power and programming, a 2-pin JST connector for a LiPo battery (not included), a microSD card slot for expanded storage, and a Qwiic connector to integrate it into SparkFun's Qwiic ecosystem. It also includes a charging circuit and fuel gauge for charging and monitoring an attached LiPo battery.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eESP32-S3 Mini Module\u003cbr\u003eDual-Core Xtensa® 32-bit LX7 Processor\u003cbr\u003e45 Programmable GPIO (21 pins broken out on Thing Plus, 17 analog input capable)\u003cbr\u003eUp to 3 UART Channels\u003cbr\u003e1 Full-Speed USB OTG\u003cbr\u003e1 USB Serial\/JTAG Controller\u003cbr\u003eUp to 4 SPI\u003cbr\u003eUp to 2 I2C\u003cbr\u003eUp to 2 I2S\u003cbr\u003e1 LCD Interface\u003cbr\u003eUp to 8 LED PWM Controller Channels\u003cbr\u003e1 TWAI® Controller (Compatible with ISO 11898-1 CAN Spec. 2.0)\u003cbr\u003e4 MB Flash\u003cbr\u003e2 MB PSRAM\u003cbr\u003e2.4 GHz WiFi 6\u003cbr\u003eBluetooth® 5 LE\u003cbr\u003ePCB Antenna\u003cbr\u003eThing Plus Form-Factor:\u003cbr\u003eDimensions: 2.55\" x 0.9\"\u003cbr\u003eTwo Mounting Holes\u003cbr\u003e28 PTH pins\u003cbr\u003eUSB-C Connector\u003cbr\u003e2-pin JST Connector for LiPo Battery (not included)\u003cbr\u003e4-pin Qwiic Connector\u003cbr\u003eµSD Card Slot\u003cbr\u003eMCP73831 Battery Charger\u003cbr\u003eCharge Rate: 213mA@3.3V\u003cbr\u003eMAX17048 Fuel Gauge\u003cbr\u003eI2C Address: 0x36\u003cbr\u003eLEDs:\u003cbr\u003ePWR - Red Power LED\u003cbr\u003eCHG - Yellow Battery Charging Indicator\u003cbr\u003eSTAT - Blue LED\u003cbr\u003eWS2812 - RGB LED (Data In tied to ESP46)\u003cbr\u003eButtons:\u003cbr\u003eBOOT\u003cbr\u003eRESET\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51612747071790,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/WRL-24408-ESP-32-S3-Front.webp?v=1767861248"},{"product_id":"edimax-2-in-1-wi-fi-4-n150-bluetooth®-4-2-nano-usb-adapter","title":"Edimax 2-in-1 Wi-Fi 4 N150 \u0026 Bluetooth® 4.2 Nano USB Adapter","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Edimax 2-in-1 Wi-Fi 4 N150 \u0026amp; Bluetooth® 4.2 Nano USB Adapter is a nano-sized USB Wi-Fi adapter with Bluetooth® 4.2 that supports Wi-Fi up to 150Mbps while allowing users to connect to all the latest Bluetooth® devices such as mobile phones, tablets, mice, keyboards, printers and more. Supporting the latest Bluetooth® 4.2 version, this adapter offers ultra-low power consumption with Bluetooth® Low Energy (BLE) while transferring data or connecting devices. And with a tiny nano-size design you can easily plug it in without blocking any surrounding USB ports, for both Wi-Fi and Bluetooth connectivity at the same time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUSB adapter\u003cbr\u003eDriver install disc - available on Edimax website\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInterface: USB 2.0 Type A\u003cbr\u003eLED Indicator: 1x Dual-Color LED (Link\/Act\/WPS) for Wi-Fi \u0026amp; Bluetooth\u003cbr\u003eAntenna: 1x Internal Antenna (1T1R)\u003cbr\u003eDimensions: 18.9 (L) x 14.9 (W) x 7.1 (H) mm\u003cbr\u003eWeight: 3g\u003cbr\u003eStandards:\u003cbr\u003e2.4GHz : IEEE 802.11 b\/g\/n\u003cbr\u003e2.4GHz : Bluetooth® 4.2, 4.0, 2.1\u003cbr\u003eFrequency Band: 2.4GHz: 2.4000~2.4835GHz\u003cbr\u003eSubject to local regulations.\u003cbr\u003eMaximum Data Rate\/Speed:\u003cbr\u003e11b : 11Mbps\u003cbr\u003e11g : 54Mbps\u003cbr\u003e11n : 150Mbps\u003cbr\u003eBluetooth® BR\/EDR : 3Mbps\u003cbr\u003eBluetooth® LE : 1Mbps\u003cbr\u003eTransmit Power: 2.4GHz\u003cbr\u003e11b(11Mbps) : 17dBm±1.5dBm\u003cbr\u003e11g(54Mbps) : 14dBm±1.5dBm\u003cbr\u003e11n(20MHz, MCS7) : 13dBm±1.5dBm\u003cbr\u003e11n(40MHz, MCS7) : 13dBm±1.5dBm\u003cbr\u003eReceiver Sensitivity: 2.4GHz\u003cbr\u003e11b(11Mbps) : -82dBm±2dBm\u003cbr\u003e11g(54Mbps) : -68dBm±2dBm\u003cbr\u003e11n(20MHz, MCS7) : -66dBm±2dBm\u003cbr\u003e11n(40MHz, MCS7) : -64dBm±2dBm\u003cbr\u003eSecurity:\u003cbr\u003eWPA3-SAE(Personal), WPA2, WPA, WEP and 802.1x\u003cbr\u003eSoftware WPS (Wi-Fi Protected Setup, driver installation required.)\u003cbr\u003eSupported Operating System:\u003cbr\u003eWindows 7\/8\/8.1\/10\/11 ( Wi-Fi \u0026amp; Bluetooth )\u003cbr\u003eLinux kernel 4.4 ~ 5.11 ( Wi-Fi \u0026amp; Bluetooth)\u003cbr\u003eAdditional version information may be announced on the EDIMAX website.\u003cbr\u003eTemperature:\u003cbr\u003eOperating: 0~40°C (32~104°F)\u003cbr\u003eStorage: -20~65°C (-4~149°F)\u003cbr\u003eHumidity:\u003cbr\u003eOperating: 10~90% (Non-condensing)\u003cbr\u003eStorage: 10~90% (Non-condensing)\u003cbr\u003eCertification: BQB, CE, FCC, IC\u003c\/p\u003e","brand":"EdiMax","offers":[{"title":"Default Title","offer_id":51612752675118,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/22824-_Wi-Fi_4_Bluetooth_4.2_USB_Adapter-_2.webp?v=1767861697"},{"product_id":"sparkfun-thing-plus-nora-w306","title":"SparkFun Thing Plus - NORA-W306","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SparkFun Thing Plus - NORA-W306 is a Feather form-factor development board equipped with the u-blox NORA-W306 module. The module contains a Realtek RTL8720DF, which has an integrated single-chip low-power dual-band (2.4GHz and 5GHz) Wireless LAN (WLAN) and Bluetooth® Low Energy (BLE 5.3) communication microcontroller. It also consists of a dual processor core: Arm Cortex-M33 and Cortex-M23. To complement the module's low-power options, we've optimized components and added the ability to depower all subsystems to conserve as much power as possible for remote battery-powered applications.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eWhy the name? We lovingly call it the “Thing” because it's perfect for your Internet of Things project. The Thing does everything from turning on an LED to posting data with your chosen platform and can be programmed just like any microcontroller. You can even program the Thing through the Arduino IDE by installing the Realtek Arduino core.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe board includes a USB-C connector for programming, data, or power. USB data lines are protected by the ESD protection diodes. These pins are connected to a CP2102N USB-to-serial converter for uploading code or serial. Three general use, reset, and boot buttons are also populated on the board. For those that need to go remote with their application, the board includes a 2-pin JST-style connector and MCP73831 single-cell LiPo charge IC (set to a default rate of 500mA). Not sure how much power you have left on your battery? There's also a MAX17048 single-cell, LiPo fuel gauge populated on the board. Voltage is regulated down for the NORA-W306 with the XC6222 3.3V\/700mA voltage regulator.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eWe've included LEDs for power, charging, and a general-purpose user LED. You will also find a small WS2812-2020 addressable RGB LED. Pins are broken out on the board's edge for 20 GPIO pins (20 interrupts, three 12-bit analog, 12 PWM, two UARTs, two SPI, and one I2C). The board also includes a microSD card socket with a transistor to toggle power for low-power applications. On the back of the board are nine jumpers for the LiPo charge rate, current measurements, LEDs, microSD card power control, USB shielding, and I2C pull-up resistors. Finally, one Qwiic connector is populated on the board to add Qwiic-enabled I2C devices to your projects easily!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eSo what are you waiting for? Connect the SparkFun Thing Plus - NORA-W306 to the cloud to start grabbing current weather conditions in your area, post sensor data to a server, synchronize your clock to Coordinated Universal Time (UTC), turn on lights for home automation, or monitor HVAC systems in smart buildings!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eu-blox NORA-W306 Module\u003cbr\u003eDual-band Wi-Fi 4 (802.11a\/b\/g\/n)\u003cbr\u003e2.4GHz and 5GHz WiFi Frequency Bands\u003cbr\u003eWPA2\/WPA3 Authentication\u003cbr\u003eBluetooth® Low Energy V5.3\u003cbr\u003e2.4GHz Frequency Band\u003cbr\u003eBluetooth LE secure connection pairing\u003cbr\u003eBuilt-in PCB antenna\u003cbr\u003eRealtek RTL8720DF Dual Processor Core\u003cbr\u003e200MHz Arm® Cortex®-M33 (Main Core)\u003cbr\u003e20MHz Arm Cortex-M2 (Low Power Core)\u003cbr\u003eArm TrustZone™ Hardware Encryption\u003cbr\u003eCryptographic Hardware Accelerator Engine\u003cbr\u003eSecure Boot\u003cbr\u003eSecure Debug Interface\u003cbr\u003eEncrypted 4MB Flash\u003cbr\u003e512kB RAM (Main Core)\u003cbr\u003e64kB RAM (Low Power Core)\u003cbr\u003eSmall Form Factor\u003cbr\u003e14.3mm x 10.4mm x 1.9mm\u003cbr\u003eThing Plus (or Feather) Form-Factor\u003cbr\u003eBreadboard-compatible 0.1\" (2.54 mm) pitch headers\u003cbr\u003eBoard Dimensions: 0.9\" x 2.3\" (22.86mm x 58.42mm)\u003cbr\u003e20x Available GPIO\u003cbr\u003eUp to 20x Interrupts\u003cbr\u003eUp to 3x 12-bit ADC\u003cbr\u003eUp to 12x PWM\u003cbr\u003eUp to 2x UARTs\u003cbr\u003eUp to 2x SPI\u003cbr\u003eUp to 1x I2C\u003cbr\u003eFour Mounting Holes\u003cbr\u003e4-40 screw compatible\u003cbr\u003e30x PTHs\u003cbr\u003e1x USB Type C Connector\u003cbr\u003e1x 2-pin JST-style Connector for a LiPo Battery (not included)\u003cbr\u003e1x 2x5 SWD Programming Port Footprint\u003cbr\u003e1x MicroSD Card Socket\u003cbr\u003e1x 4-pin Qwiic Connector\u003cbr\u003eESD Protected USB Data Pins\u003cbr\u003eCP210X USB-to-Serial Converter\u003cbr\u003eAutomatically depowered when USB-C is not connected (Ideal for low-power battery powered applications).\u003cbr\u003eXC6222 3.3V\/700mA Voltage Regulator\u003cbr\u003eMCP73831 Single Cell, LiPo Charge IC\u003cbr\u003eCharge Rate Set to 500mA (default)\u003cbr\u003eMAX17048 Single Cell LiPo Fuel Gauge\u003cbr\u003e2.2kΩ I2C Pull-Up Resistors\u003cbr\u003eButtons\u003cbr\u003eBoot (BOOT)\u003cbr\u003eReset (RESET)\u003cbr\u003eUser (USR IO2)\u003cbr\u003eLEDs\u003cbr\u003e3.3V Power (PWR)\u003cbr\u003eCharger (CHG)\u003cbr\u003eStatus (IO18)\u003cbr\u003eRGB Addressable WS2812-2020 (RGB IO14)\u003cbr\u003eJumpers\u003cbr\u003eMeasurement\u003cbr\u003ePower LED\u003cbr\u003eCharge LED\u003cbr\u003eStatus LED\u003cbr\u003e3.3V RGB Addressable LED WS2812-2020\u003cbr\u003eData In RGB Addressable LED WS2812-2020\u003cbr\u003emicroSD Card Power Control\u003cbr\u003eLiPo Charge Rate (500mA\/100mA)\u003cbr\u003eUSB Shielding\u003cbr\u003eI2C Pull-Up Resistors\u003cbr\u003eWeight: 6.60g\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51612763357486,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/WRL-21637-Thing-Plus-NORA-W306-Front.webp?v=1767862590"},{"product_id":"sparkfun-pro-micro-esp32-c3","title":"SparkFun Pro Micro - ESP32-C3","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDon't be fooled by its miniature size; the SparkFun Pro Micro ESP32-C3 packs a punch. This micro marvel crams the powerful ESP32-C3, a single-core RISC-V powerhouse with 400KB of SRAM, into a compact 1.3in. x 0.7in. board. Clocking in at 160MHz, it's ready to tackle your projects quickly and efficiently.\u003c\/p\u003e\n\u003cp\u003eForget wires and soldering headaches – the Pro Micro ESP32-C3 embraces the simplicity of the Qwiic connector. Just plug and play any Qwiic sensor and watch your projects come alive with environmental data, motion detection, or whatever your imagination conjures. And stay connected, wherever you are, with built-in WiFi and Bluetooth® 5 (LE).\u003c\/p\u003e\n\u003cp\u003eBut the Pro Micro ESP32-C3 isn't just about small talk. Its 22 programmable GPIOs, accessible through handy castellated headers, unlock a multitude of possibilities. From tinkering with LEDs and servos to crafting intricate sensor networks, this tiny titan has the muscle to handle it all. And thanks to support for a range of protocols like ADC, SPI, UART, and I2C, the creative toolbox keeps expanding.\u003c\/p\u003e\n\u003cp\u003eThe Pro Micro ESP32-C3 taps into the power of Espressif's open-source ESP-IDF, a robust ecosystem brimming with libraries, tools, and a supportive community. Plus, you can leverage the familiar Arduino IDE for a smooth development experience.\u003c\/p\u003e\n\u003cp\u003eSo whether you're building a wearable masterpiece, a chatty IoT gadget, or a robotic friend, the SparkFun Pro Micro ESP32-C3 is your pint-sized partner in innovation. Grab one today and let your small-scale dreams take flight!\u003c\/p\u003e\n\u003cp\u003eIf you're looking for the ESP32-C3 module itself, you can also buy them individually or in bulk from SparkFun! This lets you integrate the ESP32-C3 into your own custom design or grab a handful for your next project.\u003c\/p\u003e\n\u003cp\u003eNote: Unlike other ESP32 boards, this device requires user interaction to program. To program the device, hold down BOOT while resetting it. This is a simple process, but it is not automatic.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCPU and On ­Chip Memory\u003cbr\u003eESP32-C3FH4 embedded,32-bit RISC-V single-core processor, up to 160MHz\u003cbr\u003e384 KB ROM\u003cbr\u003e400 KB SRAM (16 KB for cache)\u003cbr\u003e8 KB SRAM in RTC\u003cbr\u003e4 MB flash in chip package\u003cbr\u003eWi­Fi\u003cbr\u003e802.11b\/g\/n\u003cbr\u003eCenter frequency range of operating channel:2412~2484 MHz\u003cbr\u003eSupports 20 MHz, 40 MHz bandwidth in 2.4 GHz band\u003cbr\u003e1T1R mode with data rate up to 150 Mbps\u003cbr\u003eWi-Fi Multimedia (WMM)\u003cbr\u003eTX\/RX A-MPDU, TX\/RX A-MSDU\u003cbr\u003eImmediate Block ACK\u003cbr\u003eFragmentation and defragmentation\u003cbr\u003eBluetooth\u003cbr\u003eBluetooth LE: Bluetooth 5, Bluetooth mesh\u003cbr\u003eSpeed: 125 Kbps, 500 Kbps, 1 Mbps, 2 Mbps\u003cbr\u003eChannel selection algorithm #2\u003cbr\u003eInternal co-existence mechanism between Wi-Fi and Bluetooth to share the same antenna\u003cbr\u003ePeripherals\u003cbr\u003eGPIO, SPI, UART, I2C, I2S, remote control peripheral, LED PWM controller, general DMA controller, TWAI®controller (compatible with ISO11898-1, i.e. CAN Specification 2.0), USBSerial\/JTAG controller, temperature sensor, SARADC, general-purpose timers, watchdog timers\u003cbr\u003eIntegrated Components on Module\u003cbr\u003e40 MHz crystal oscillator\u003cbr\u003eAntenna Options\u003cbr\u003eOn-board PCB antenna (ESP32-C3-MINI-1)\u003cbr\u003eOperating Conditions\u003cbr\u003eOperating voltage\/Power supply: 3.0 ~ 3.6 V\u003cbr\u003eOperating ambient temperature: –40 ~ 85 °C\u003cbr\u003e1x Vertical Qwiic Connector\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51612887417134,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/DEV-23484-Pro-Micro-ESP32-C3-Front.webp?v=1767863316"},{"product_id":"sparkfun-qwiic-pro-mini-esp32","title":"SparkFun Qwiic Pro Mini - ESP32","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSay hello to the next generation of Pro Mini boards - the SparkFun ESP32 Qwiic Pro Mini houses the powerful ESP32-PICO-MINI-N8R2 from Espressif on our compact Pro Mini footprint with 2MB of PSRAM. With two individually controllable CPU cores, adjustable CPU clock frequency, a co-processor that can be used in situations that require minimal computing power, as well as a rich set of peripherals such as capabilities for an external SD card interface, capacitive touch sensors, ADC, DAC, Two-Wire Automotive Interface, to Ethernet, high-speed SPI, UART, I²S, and I²C, this board is a powerhouse in a tiny little package. Best of all, utilizing our handy Qwiic system, no soldering is required to connect this Pro Mini to the rest of your system.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe integration of Bluetooth® (specifically Bluetooth SPP), Bluetooth LE, and WiFi ensures that a wide range of applications can be targeted and that the module is all-around: using WiFi allows an extensive physical range and direct connection to the Internet through a WiFi router while using Bluetooth allows the user to conveniently connect to the phone or broadcast low energy beacons for its detection. The sleep current of the ESP32 chip is less than 5μA, making it suitable for battery-powered and wearable electronics applications. The module supports a data rate of up to 150Mbps and 20dBm output power at the antenna to ensure the most comprehensive physical range.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eNote: Unlike other ESP32 boards, this device requires user interaction to program. To program the device, hold down GP0 while resetting it. This is a simple process, but it is not automatic.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCPU and On­Chip Memory\u003cbr\u003eESP32-PICO-V3-02 embedded, Xtensa dual-core 32-bit LX6 microprocessor, up to 240 MHz\u003cbr\u003e448KB ROM for booting and core functions\u003cbr\u003e520KB SRAM for data and instructions\u003cbr\u003e16KB SRAM in RTC\u003cbr\u003e8MB SPI flash\u003cbr\u003e2MB PSRAM\u003cbr\u003eWi­Fi\u003cbr\u003e802.11b\/g\/n\u003cbr\u003eBit rate: 802.11n up to 150 Mbps\u003cbr\u003eA-MPDU and A-MSDU aggregation\u003cbr\u003e0.4 µs guard interval support\u003cbr\u003eCenter frequency range of operating channel: 2412 ~ 2484 MHz\u003cbr\u003eBluetooth\u003cbr\u003eBluetooth V4.2 BR\/EDR and Bluetooth LE specification\u003cbr\u003eClass-1, class-2 and class-3 transmitter\u003cbr\u003eAFH\u003cbr\u003eCVSD and SBC\u003cbr\u003ePeripherals\u003cbr\u003eUART, SPI, SDIO, I2C, LED PWM, Motor PWM, I2S, IR, pulse counter, GPIO, capacitive touch sensor, ADC, DAC, TWAI® (compatible with ISO 11898-1, i.e. CAN Specification 2.0), Ethernet MAC\u003cbr\u003eIntegrated Components on Module\u003cbr\u003e40 MHz crystal oscillator\u003cbr\u003eAntenna Options\u003cbr\u003eESP32-PICO-MINI-02: On-board PCB antenna\u003cbr\u003eOperating Conditions\u003cbr\u003eOperating voltage\/Power supply: 3.0 ~ 3.6 V\u003cbr\u003eOperating ambient temperature: –40 ~ 85 °C\u003cbr\u003e1x Vertical Qwiic Connector\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51612889022766,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/23386-Pro-Mini-ESP32-Back.webp?v=1767863644"},{"product_id":"arduino-nano-esp32-with-headers","title":"Arduino Nano ESP32 with Headers","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIntroducing the Nano ESP32, a powerful addition to the Arduino ecosystem that brings the popular ESP32-S3 to the world of Arduino and MicroPython programming. Whether you're a beginner stepping into the world of IoT or MicroPython, or an advanced user looking to incorporate it into your next product, the Nano ESP32 is the perfect choice. It covers all your needs to kick-start your IoT or MicroPython project with ease.\u003c\/p\u003e\n\u003cp\u003eNano ESP32 is a 3.3 V development board based on the NORA-W106-10B from u-blox®, a module that includes a ESP32-S3 system on a chip (SoC). This module has support for Wi-Fi® and Bluetooth® Low Energy (LE), with amplified communication through a built-in antenna. The CPU (32-bit Xtensa® LX7) supports clock frequencies at up to 240 MHz.\u003c\/p\u003e\n\u003cp\u003eThis version comes with headers pre-soldered onto the board.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMicrocontroller: u-blox® NORA-W106 (ESP32-S3)\u003cbr\u003eUSB Connector: USB-C\u003cbr\u003ePins:\u003c\/p\u003e\n\u003cp\u003eBuilt-in LED Pin: 13 (RGB)\u003c\/p\u003e\n\u003cp\u003eDigital I\/O Pins: 14\u003cbr\u003eAnalog inupt pins: 8\u003cbr\u003ePWM pins: 5\u003cbr\u003eExternal interupts: All digital pins\u003cbr\u003eConnectivity: Wi-Fi®, Bluetooth®\u003cbr\u003eCommunication:\u003c\/p\u003e\n\u003cp\u003eUART: 2x\u003c\/p\u003e\n\u003cp\u003eI2C: 1x, A4 (SDA), A5 (SCL)\u003cbr\u003eSPI: D11 (COPI), D12 (CIPO), D13 (SCK).\u003cbr\u003eUse any GPIO for Chip Select (CS)\u003cbr\u003eI\/O Voltage: 3.3V\u003cbr\u003eInput Voltage (nominal): 6-21V\u003cbr\u003eSource Current per I\/O Pin: 40mA\u003cbr\u003eSink Current per I\/O Pin: 20mA\u003cbr\u003eClock Speed (Processor): up to 240MHz\u003cbr\u003eROM: 384kB\u003cbr\u003eSRAM: 512kB\u003cbr\u003eExternal Flash: 128Mbit (16MB)\u003cbr\u003eWidth: 18mm\u003cbr\u003eLength: 45mm\u003c\/p\u003e","brand":"Arduino","offers":[{"title":"Default Title","offer_id":51612889743662,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/23321-_DEV_Arduino_Nano_ESP32_with_headers-_02.webp?v=1767863799"},{"product_id":"sparkfun-qwiic-pocket-development-board-esp32-c6","title":"SparkFun Qwiic Pocket Development Board - ESP32-C6","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SparkFun ESP32-C6 Qwiic Pocket Development Board is designed to fit the 1in. x 1in. Qwiic Standard Size, making it easy to add a powerful wireless development platform that stacks into any existing project using the Qwiic ecosystem. It features the ESP32-C6 Mini-1 module from espressif™. We designed this board with components on both sides of the PCB to squeeze as many features as possible into its tiny footprint, including a USB-C connector, Qwiic connector, 2-pin JST battery connector with an on-board charging circuit, as well as two buttons for Reset and Boot. The design also works to optimize power consumption. In our testing, we measured total current consumption by the board to be ~14µA in Deep Sleep mode, making it an excellent fit for remote, battery-powered applications.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe ESP32-C6 SoC is built around a RISC-V single-core processor with 4 MB flash memory and an integrated wireless stack. The wireless stack supports 2.4 GHz WiFi 6, Bluetooth® 5.3, Zigbee, and Thread (802.15.4) and uses an on-board PCB antenna. The ESP32-C6 includes various peripheral options, including SPI, UART, LPUART, I2C, I2S, LED PWM, USB Serial\/JTAG controller, ADC, and more. Though some are tied to specific pins, many of these peripherals can be mapped to any GPIO pin. Due to the board's size, it only breaks out eight total GPIO pins, including four ADC-compatible pins, Low Power and Standard UART, and an extra two GPIO pins.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eESP32-C6 MINI-1 Module:\u003cbr\u003e32-bit RISC-V Single-Core Microprocessor\u003cbr\u003e23 Multifunctional GPIO\u003cbr\u003eMost peripherals available on any GPIO pin.\u003cbr\u003eUp to 7 12-bit ADC Channels\u003cbr\u003eUp to 2 UART Channels (with flow control)\u003cbr\u003eUSB Serial\u003cbr\u003eOne Low Power UART Channel\u003cbr\u003eOne I2C Channel\u003cbr\u003eOne Low Power I2C Channel\u003cbr\u003eLED PWM\u003cbr\u003eOne I2S Channel\u003cbr\u003e4 MB Flash\u003cbr\u003e2.4 GHz WiFi 6\u003cbr\u003eBluetooth® 5 LE\u003cbr\u003eZigbee \u0026amp; Thread (802.15.4)\u003cbr\u003ePCB Antenna\u003cbr\u003eMatter-compatible\u003cbr\u003eQwiic Form-Factor:\u003cbr\u003eDimensions: 1\" x 1\"\u003cbr\u003eFour Mounting Holes\u003cbr\u003e8 PTH pins\u003cbr\u003eUSB-C Connector\u003cbr\u003e2-pin JST Connector for LiPo Battery (not included)\u003cbr\u003e4-pin Qwiic Connector\u003cbr\u003eMCP73831 Battery Charger\u003cbr\u003eCharge Rate: 213mA@3.3V\u003cbr\u003eLEDs:\u003cbr\u003ePWR - Red Power LED\u003cbr\u003eCHG - Yellow Battery Charging Indicator\u003cbr\u003eSTAT - Blue Status LED\u003cbr\u003eButtons:\u003cbr\u003eBOOT\u003cbr\u003eRESET\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51612889973038,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/22925-_DEV_SparkFun_Qwiic_Pocket_Development_Board-_03.webp?v=1767863905"},{"product_id":"sparkfun-thing-plus-esp32-c6","title":"SparkFun Thing Plus - ESP32-C6","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePacked with cutting-edge technology and housed in a compact, user-friendly footprint, the SparkFun ESP32-C6 Thing Plus empowers your wireless creations like never before. At its heart lies the powerful ESP32-C6 WROOM-1-N16 module from Espressif™, boasting a RISC-V single-core processor, more than enough flash memory, and a diverse selection of wireless connectivity options. Dive into the realms of 2.4 GHz WiFi 6, Bluetooth® 5.3, Zigbee and Thread (802.15.4), unlocking a world of possibilities for your projects.\u003c\/p\u003e\n\u003cp\u003eThe SparkFun ESP32-C6 Thing Plus is equipped with multiple features that accentuate the boards potential. The microSD card slot lets you expand your project's capabilities, while the Qwiic connector seamlessly integrates the Thing Plus into SparkFun's vast ecosystem of sensors, actuators, and more.\u003c\/p\u003e\n\u003cp\u003eThis development board also includes a LiPo battery charger and fuel gauge, an addressable LED, and more. The Thing Plus footprint is Feather-compatible and breaks out all of the ESP32-C6's 23 GPIO pins to 0.1in.-spaced PTH headers. For primary power and programming, the board is also equipped with a USB-C connector and a 2-pin JST connector for a LiPo battery.\u003c\/p\u003e\n\u003cp\u003eThe ESP32-C6 includes a wide range of peripheral options including SPI, UART, LPUART, I2C, I2S, LED PWM, USB Serial\/JTAG controller, ADC and more. Many of these peripherals can be mapped to any GPIO pin though some are tied to specific pins.\u003c\/p\u003e\n\u003cp\u003eElevate your wireless projects with the SparkFun ESP32-C6 Thing Plus. Its intuitive design, powerful features, and seamless connectivity await.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eESP32-C6 WROOM-1-N16 Module:\u003cbr\u003e32-bit RISC-V Single-Core Microprocessor\u003cbr\u003e23 Multifunctional GPIO\u003cbr\u003eMost peripherals available on any GPIO pin.\u003cbr\u003eUp to 7 12-bit ADC Channels\u003cbr\u003eUp to 2 UART Channels (with flow control)\u003cbr\u003eUSB Serial\u003cbr\u003eOne Low Power UART Channel\u003cbr\u003eOne I2C Channel\u003cbr\u003eOne Low Power I2C Channel\u003cbr\u003eLED PWM\u003cbr\u003eOne I2S Channel\u003cbr\u003e16 MB Flash\u003cbr\u003e2.4 GHz WiFi 6\u003cbr\u003eBluetooth® 5 LE\u003cbr\u003eZigbee \u0026amp; Thread (802.15.4)\u003cbr\u003ePCB Antenna\u003cbr\u003eMatter-compatible\u003cbr\u003eThing Plus Form-Factor:\u003cbr\u003eDimensions: 2.55\" x 0.9\"\u003cbr\u003eTwo Mounting Holes\u003cbr\u003e28 PTH pins\u003cbr\u003eUSB-C Connector\u003cbr\u003e2-pin JST Connector for LiPo Battery (not included)\u003cbr\u003e4-pin Qwiic Connector\u003cbr\u003eµSD Card Slot\u003cbr\u003eMCP73831 Battery Charger\u003cbr\u003eCharge Rate: 213mA@3.3V\u003cbr\u003eMAX17048 Fuel Gauge\u003cbr\u003eI2C Address: 0x36\u003cbr\u003eLEDs:\u003cbr\u003ePWR - Red Power LED\u003cbr\u003eCHG - Yellow Battery Charging Indicator\u003cbr\u003eSTAT - WS2812 RGB LED (Tied to IO23)\u003cbr\u003eButtons:\u003cbr\u003eBOOT\u003cbr\u003eRESET\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51612890104110,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/DEV-22924-Thing-Plus-ESP32-C6-Front.webp?v=1767864065"},{"product_id":"arduino-nano-33-iot-with-headers","title":"Arduino Nano 33 IoT with Headers","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ease of use of a Nano board with the addition of secure IoT and BT connectivity.\u003c\/p\u003e\n\u003cp\u003eThis small, robust and powerful board has WiFi and Bluetooth connectivity that combined with its low power architecture makes it a practical and cost effective solution for your connected projects.\u003c\/p\u003e\n\u003cp\u003eArduino Nanof 33 IoT is fully compatible with the Arduino IoT Cloud and supports full TLS secure transport: the ATECC608A cryptochip stores the cryptographic keys in hardware, offering a very high level of security for this class of products. The integration with the Arduino IoT Cloud offers also a very efficient way of setting up online dashboards with little coding and minimal effort.\u003c\/p\u003e\n\u003cp\u003eIn the same iconic size of the Arduino NANO, the Arduino Nano 33 IoT hosts an Arm Cortex-M0+ SAMD21 processor, a WiFi and Bluetooth module based on ESP32, a 6 axis Inertial Measurement Unit (IMU) and a crypto chip which can securely store certificates and pre shared keys.\u003c\/p\u003e\n\u003cp\u003eThe board can either be used in a breadboard (when mounting pin headers), or as a SMT module, directly soldering it via the castellated pads. With headers mounted.\u003c\/p\u003e\n\u003cp\u003eArduino Part #: \u003cstrong\u003eABX00032\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Arduino","offers":[{"title":"Default Title","offer_id":51612891185454,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/15589_-_Arduino_Nano_33_IoT_with_Headers.webp?v=1767864422"},{"product_id":"sparkfun-iot-redboard-esp32-development-board","title":"SparkFun IoT RedBoard - ESP32 Development Board","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SparkFun IoT RedBoard is an ESP32 Development Board that includes everything but the kitchen sink! Espressif's ESP32 WROOM is a powerful WiFi and Bluetooth® MCU module that targets a wide variety of applications. At the core of this module is the ESP32-D0WDQ6 chip which is designed to be both scalable and adaptive. The IoT RedBoard can target a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming, and MP3 decoding. The IoT ReadBoard also utilizes our handy Qwiic Connect System which means no soldering or shields are required to connect it to the rest of your system!\u003c\/p\u003e\n\u003cp\u003eThe USB-to-serial is achieved with a USB-C connector with through hole anchoring and the ubiquitous CH340G requiring fewer driver installs. We've included 3.3V voltage translation and a Qwiic connector to the edge of the board to allow for quick and seamless connection to our ever-growing line of I2C based Qwiic products. The board even includes a microSD socket if your application requires you to log and save data to a memory card.\u003c\/p\u003e\n\u003cp\u003eThe operating system is freeRTOS with LwIP; TLS 1.2 with hardware acceleration is built in as well. Secure (encrypted) over the air (OTA) upgrade is also supported, so that users can upgrade their products even after their release, at minimum cost and effort.\u003c\/p\u003e\n\u003cp\u003eThe SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCPU and On­Chip Memory\u003cbr\u003eESP32-D0WD-V3 embedded, Xtensa dual-core 32-bit LX6 microprocessor, up to 240MHz\u003cbr\u003e448KB ROM\u003cbr\u003e520KB SRAM\u003cbr\u003e16KB SRAM in RTC\u003cbr\u003eWi­Fi\u003cbr\u003e802.11b\/g\/n\u003cbr\u003eBit rate: 802.11n up to 150Mbps\u003cbr\u003eA-MPDU and A-MSDU aggregation\u003cbr\u003e0.4µs guard interval support\u003cbr\u003eCenter frequency range of operating channel: 2412 ~ 2484MHz\u003cbr\u003eBluetooth®\u003cbr\u003eBluetooth® V4.2 BR\/EDR and Bluetooth® LE specification\u003cbr\u003ePeripherals\u003cbr\u003emicroSD card, UART, SPI, SDIO, I2C, LED PWM, Motor PWM, I2S, IR, pulse counter, GPIO, capacitive touch sensor, ADC, DAC, TWAI® (compatible with ISO 11898-1, i.e. CAN Specification 2.0)\u003cbr\u003eIntegrated Components on Module\u003cbr\u003e40MHz crystal oscillator\u003cbr\u003e4\/8\/16 MB SPI flash\u003cbr\u003e4-pin Qwiic Connector\u003cbr\u003e2-pin JST Connector for Single Cell, LiPo Batteries\u003cbr\u003eBuilt-in LiPo Charge IC (MCP73831)\u003cbr\u003eDefault Charge Rate: 500mA\u003cbr\u003eLiPo Fuel Gauge (MAX17048)\u003cbr\u003eLEDs\u003cbr\u003eCHG\u003cbr\u003ePWR\u003cbr\u003eRX\/TX\u003cbr\u003eUser LED\u003cbr\u003eAddressable RGB LED (WS2812)\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51612891316526,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/ESP32_01_Front.webp?v=1767864539"},{"product_id":"esp32-wroom-mcu-module-8mb-dual-antenna","title":"ESP32 WROOM MCU Module - 8MB (Dual Antenna)","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ESP32-WROOM-DA, which is a module that achieves high-quality, wireless connectivity across large areas, using two complementary PCB antennas in different directions. Also, based on its industry-leading technical specifications, the co-existence of WiFi and Bluetooth® (Classic \u0026amp; Low-Energy) connectivity, and its low-power consumption modes, the users of ESP32-WROOM-DA will be able to bring to life a wide range of complex IoT application scenarios.\u003c\/p\u003e\n\u003cp\u003eThe module features the ESP32-D0WD-V3 chip based on an Xtensa® 32-bit LX6 dual-core processor with a maximum frequency of 240 MHz, along with 520 KB of SRAM and 448 KB of ROM. While being used, the module works according to signal strength, selecting the strongest signal to ensure continuous communication. When a weak signal is detected, the module continues to work with an API call that helps it switch to the other antenna with a stronger signal.\u003c\/p\u003e\n\u003cp\u003eThe module is pin compatible with the ESP32-WROOM-32E.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2.4 GHz WiFi + Bluetooth ® + Bluetooth LE module\u003cbr\u003e802.11b\/g\/n WiFi\u003cbr\u003eBluetooth V4.2 BR\/EDR and Bluetooth LE specification\u003cbr\u003eXtensa® dualcore 32bit LX6 microprocessor\u003cbr\u003e8MB flash\u003cbr\u003e40 MHz crystal oscillator\u003cbr\u003e24 GPIOs\u003cbr\u003eOn-Board dual PCB Trace Antennas\u003cbr\u003e3.0 ~ 3.6 VDC Operating Voltage\u003cbr\u003ePin Compatible with the ESP32-WROOM-32E\u003c\/p\u003e","brand":"Espressif","offers":[{"title":"Default Title","offer_id":51612940730670,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/19899-ESP32-WROOM-MCU-Module3.webp?v=1767868925"},{"product_id":"esp32-s2-wroom-module-4mb-pcb-antenna","title":"ESP32-S2 WROOM Module - 4MB (PCB Antenna)","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt's best to think of the ESP32-S2 WROOM Module as the next step in the ESP32 WROOM module line. It builds on the benefits of the original ESP32 WROOM Module with new and improved features such as security, display support, and increased environmental performance. Featuring transparent external flash and RAM encryption, secure boot features allowing only signed firmware, as well as included HMAC and Digital Signature modules that use software inaccessible keys to generate SHA-MAC and MAC signatures solving most of the security flaws of the previous generation.\u003c\/p\u003e\n\u003cp\u003eThe module features the ESP32-S2 Xtensa® single-core 32-bit LX7 microprocessor, up to 240 MHz. The module includes the same rich peripherial set you've come to expect from the ESP32 Line: 43 GPIOs, 1 full-speed USB OTG interface, SPI, I2S, UART, I2C, LED PWM, LCD interface, camera interface, ADC, DAC, touch sensor, and a temperature sensor. It can also be configured to provide USB OTG functionality or an LCD interface.\u003c\/p\u003e\n\u003cp\u003eThe module comes fully certified with integrated antenna and software stacks and 4MB of flash. It's operating temperature range is an expanded -40 to 125 degrees Celsius!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMCU\u003cbr\u003eESP32-S2 embedded, Xtensa® single-core 32-bit LX7 microprocessor, up to 240 MHz\u003cbr\u003e128 KB ROM\u003cbr\u003e320 KB SRAM\u003cbr\u003e16 KB SRAM in RTC\u003cbr\u003eWi-Fi\u003cbr\u003e802.11 b\/g\/n\u003cbr\u003eBit rate: 802.11n up to 150 Mbps\u003cbr\u003eA-MPDU and A-MSDU aggregation\u003cbr\u003e0.4μs guard interval support\u003cbr\u003eCenter frequency range of operating channel: 2412 ~ 2484 MHz\u003cbr\u003eHardware\u003cbr\u003eInterfaces: GPIO, SPI, LCD, UART, I2C, I2S, Camera interface, IR, pulse counter, LED PWM, TWAITM (compatible with ISO 11898-1), USB OTG 1.1, ADC, DAC, touch sensor, temperature sensor\u003cbr\u003e40 MHz crystal oscillator\u003cbr\u003e4 MB SPI flash\u003cbr\u003eOperating voltage\/Power supply: 3.0 ~ 3.6 V\u003cbr\u003eOperating temperature range: –40 ~ 85 °C\u003cbr\u003eDimensions: (18 × 31 × 3.3) mm\u003cbr\u003eRoHS\/REACH certified\u003cbr\u003eFCC\/CE-RED\/SRRC Certified (RF)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Espressif","offers":[{"title":"Default Title","offer_id":51612942696750,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/18583-ESP32-S2_WROOM_Module_-_4MB__PCB_Antenna_-02.webp?v=1767869044"},{"product_id":"sparkfun-micromod-wifi-function-board-esp32","title":"SparkFun MicroMod WiFi Function Board - ESP32","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SparkFun MicroMod ESP32 Function Board adds additional wireless options to MicroMod Processor Boards that do not have that capability. This special function board acts as a coprocessor that takes advantage of Espressif's ESP32 WROOM to add WiFi and Bluetooth® to your applications.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eAt the core of the ESP32 WROOM module is the ESP32-D0WD-V3 chip which is designed to be both scalable and adaptive. ESP32 WROOM module on this board features 16MB of flash memory, 520kB of internal SRAM, an integrated 802.11 b\/g\/n WiFi transceiver, and dual-mode Bluetooth capabilities. Utilizing our handy M.2 MicroMod connector, no soldering is required to connect it to your system. Simply match up the key on your processor and function board's beveled edge connector to their respective key on the M.2 connector, then secure them to the main board with screws. The ESP32 WROOM module can then be controlled using AT commands via the serial UART port.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe ESP32 Function Board comes pre-flashed with AT-command firmware and acts as a serial-to-WiFi gateway. Next to the module is a USB-C connector and CP2102 USB-to-serial converter. Whether you want to add AT commands of your own, or flash custom firmware on the ESP32, you can use this port to reprogram the ESP32.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eNote: A MicroMod Processor and Main Board are not included with this MicroMod WiFi Function Board. These boards will need to be purchased separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInput Voltage Range\u003cbr\u003e2.5V to 6.0V\u003cbr\u003eTyp. 5V via Main Board's USB Connector\u003cbr\u003eTyp. ~3.7V to 4.2V via Main Board's LiPo Battery Connector\u003cbr\u003eI\/O Voltage\u003cbr\u003e3.3V\u003cbr\u003eUSB Type C Connector\u003cbr\u003eCP2102 USB-to-Serial Converter\u003cbr\u003eAP2112 3.3V Voltage Regulator (Rated 600mA)\u003cbr\u003eESP32-WROOM-32E Module1\u003cbr\u003eXtensa® dual-core 32-bit LX6 microprocessor\u003cbr\u003eUp to 240MHz clock frequency\u003cbr\u003e16MB of flash storage\u003cbr\u003e520kB internal SRAM\u003cbr\u003eIntegrated 802.11 b\/g\/n WiFi transceiver\u003cbr\u003eIntegrated dual-mode Bluetooth® (classic and BLE)\u003cbr\u003eHardware accelerated encryption (AES, SHA2, ECC, RSA-4096)\u003cbr\u003e2.5 µA deep sleep current\u003cbr\u003eButtons\u003cbr\u003eReset\u003cbr\u003eBoot\u003cbr\u003ePower LED\u003cbr\u003eI2C Pull-Up Resistors\u003cbr\u003eJumpers\u003cbr\u003ePWR LED\u003cbr\u003eI2C Pull-Up Resistors\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51612942958894,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/18430-SparkFun_MicroMod_ESP32_Function_Board-05.webp?v=1767869253"},{"product_id":"esp32-c3-mini-development-board","title":"ESP32-C3 Mini Development Board","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ESP32-C3 Mini Development Board is an entry-level development board based on ESP32-C3-MINI-1, a module named for its small size. This board integrates complete Wi-Fi and Bluetooth® LE functions.\u003c\/p\u003e\n\u003cp\u003eMost of the I\/O pins on the ESP32-C3-MINI-1 module are broken out to the pin headers on both sides of this board for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-C3-DevKitM-1 on a breadboard.\u003c\/p\u003e\n\u003cp\u003eIf you're looking for the ESP32-C3 module itself, you can also buy them individually or in bulk from SparkFun! This lets you integrate the ESP32-C3 into your own custom design or grab a handful for your next project.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWi­Fi\u003cbr\u003eIEEE 802.11 b\/g\/n-compliant\u003cbr\u003eSupports 20 MHz, 40 MHz bandwidth in 2.4GHz band\u003cbr\u003e1T1R mode with data rate up to 150 Mbps\u003cbr\u003eWi-Fi Multimedia (WMM)\u003cbr\u003eTX\/RX A-MPDU, TX\/RX A-MSDU\u003cbr\u003eImmediate Block ACK\u003cbr\u003eFragmentation and defragmentation\u003cbr\u003eTransmit opportunity (TXOP)\u003cbr\u003eAutomatic Beacon monitoring (hardware TSF)\u003cbr\u003e4 × virtual Wi-Fi interfaces\u003cbr\u003eSimultaneous support for Infrastructure BSS in Station mode, SoftAP mode, Station + SoftAP mode, and promiscuous mode. Note that when ESP32-C3 family scans in Station mode, the SoftAP channel will change along with the Station channel\u003cbr\u003eAntenna diversity\u003cbr\u003e802.11mc FTM\u003cbr\u003eBluetooth\u003cbr\u003eBluetooth LE: Bluetooth 5, Bluetooth mesh\u003cbr\u003eSpeed: 125 Kbps, 500 Kbps, 1 Mbps, 2 Mbps\u003cbr\u003eAdvertising extensions\u003cbr\u003eMultiple advertisement sets\u003cbr\u003eChannel selection algorithm #2\u003cbr\u003eCPU and Memory\u003cbr\u003e32-bit RISC-V single-core processor, up to 160MHz\u003cbr\u003e384 KB ROM\u003cbr\u003e400 KB SRAM (16 KB for cache)\u003cbr\u003e8 KB SRAM in RTC\u003cbr\u003eEmbedded flash (see details in Chapter 1 Family Member Comparison)\u003cbr\u003eSPI, Dual SPI, Quad SPI, and QPI interfaces that allow connection to multiple external flash\u003cbr\u003eAdvanced Peripheral Interfaces\u003cbr\u003e22 × programmable GPIOs\u003cbr\u003eDigital interfaces:\u003cbr\u003e3 × SPI\u003cbr\u003e2 × UART\u003cbr\u003e1 × I2C\u003cbr\u003e1 × I2S\u003cbr\u003eRemote control peripheral, with 2 transmit channels and 2 receive channels\u003cbr\u003eLED PWM controller, with up to 6 channels\u003cbr\u003eFull-speed USB Serial\/JTAG controller\u003cbr\u003eGeneral DMA controller (GDMA), with 3 transmit channels and 3 receive channels\u003cbr\u003e1 × TWAI® controller (compatible with ISO 11898-1)\u003cbr\u003eAnalog interfaces:\u003cbr\u003e2 × 12-bit SAR ADCs, up to 6 channels\u003cbr\u003e1 × temperature sensor\u003cbr\u003eTimers:\u003cbr\u003e2 × 54-bit general-purpose timers\u003cbr\u003e3 × watchdog timers\u003cbr\u003e1 × 52-bit system timer Low Power Management\u003cbr\u003ePower Management Unit with four power modes Security\u003cbr\u003eSecure boot\u003cbr\u003eFlash encryption • 4096-bit OTP, up to 1792 bits for users • Cryptographic hardware acceleration: – AES-128\/256 (FIPS PUB 197)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Espressif","offers":[{"title":"Default Title","offer_id":51612946268462,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/18036-ESP32-C3_Mini_Development_Board-04.webp?v=1767869426"},{"product_id":"esp32-wroom-mcu-module-16mb-pcb-antenna","title":"ESP32 WROOM MCU Module - 16MB (PCB Antenna)","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ESP32-WROOM-32E is a powerful, generic Wi-Fi+BT+BLE MCU module that targets a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming and MP3 decoding.\u003c\/p\u003e\n\u003cp\u003eAt the core of this module is the ESP32-D0WDQ6 chip. The chip embedded is designed to be scalable and adaptive. There are two CPU cores that can be individually controlled, and the CPU clock frequency is adjustable from 80 MHz to 240 MHz. The user may also power off the CPU and make use of the low-power co-processor to constantly monitor the peripherals for changes or crossing of thresholds. ESP32 integrates a rich set of peripherals, ranging from capacitive touch sensors, Hall sensors, SD card interface, Ethernet, high-speed SPI, UART, I²S and I²C.\u003c\/p\u003e\n\u003cp\u003eThe integration of Bluetooth, Bluetooth LE and Wi-Fi ensures that a wide range of applications can be targeted, and that the module is all-around: using Wi-Fi allows a large physical range and direct connection to the Internet through a Wi-Fi router, while using Bluetooth allows the user to conveniently connect to the phone or broadcast low energy beacons for its detection. The sleep current of the ESP32 chip is less than 5 µA, making it suitable for battery powered and wearable electronics applications. The module supports a data rate of up to 150 Mbps, and 20 dBm output power at the antenna to ensure the widest physical range. As such the module does offer industry-leading specifications and the best performance for electronic integration, range, power consumption, and connectivity.\u003c\/p\u003e\n\u003cp\u003eThe operating system chosen for ESP32 is freeRTOS with LwIP; TLS 1.2 with hardware acceleration is built in as well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis updated module is the latest ESP32-WROOM-32E. The \"E\" is the latest WROOM version, using the new V3 silicon. It is a direct upgrade to the 32D that fixes some bugs. Check out the documents tab for the datasheets \u0026amp; details.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Espressif","offers":[{"title":"Default Title","offer_id":51612948791598,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/17830-ESP32_WROOM_Module_-_16MB__PCB_Antenna_-04.webp?v=1767869605"},{"product_id":"esp32-wroom-mcu-module-16mb-u-fl","title":"ESP32 WROOM MCU Module - 16MB (U.FL)","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eESP32-WROOM-32 is a powerful, generic Wi-Fi+BT+BLE MCU module that targets a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming and MP3 decoding.\u003c\/p\u003e\n\u003cp\u003eAt the core of this module is the ESP32-D0WDQ6 chip. The chip embedded is designed to be scalable and adaptive. There are two CPU cores that can be individually controlled, and the CPU clock frequency is adjustable from 80 MHz to 240 MHz. The user may also power off the CPU and make use of the low-power co-processor to constantly monitor the peripherals for changes or crossing of thresholds. ESP32 integrates a rich set of peripherals, ranging from capacitive touch sensors, SD card interface, Ethernet, high-speed SPI, UART, I²S and I²C.\u003c\/p\u003e\n\u003cp\u003eThe integration of Bluetooth, Bluetooth LE and Wi-Fi ensures that a wide range of applications can be targeted, and that the module is all-around: using Wi-Fi allows a large physical range and direct connection to the Internet through a Wi-Fi router, while using Bluetooth allows the user to conveniently connect to the phone or broadcast low energy beacons for its detection. The sleep current of the ESP32 chip is less than 5 µA, making it suitable for battery powered and wearable electronics applications. The module supports a data rate of up to 150 Mbps, and 20 dBm output power at the antenna to ensure the widest physical range. As such the module does offer industry-leading specifications and the best performance for electronic integration, range, power consumption, and connectivity.\u003c\/p\u003e\n\u003cp\u003eThe operating system chosen for ESP32 is freeRTOS with LwIP; TLS 1.2 with hardware acceleration is built in as well.\u003c\/p\u003e\n\u003cp\u003eThis version comes with a u.FL connecter.\u003c\/p\u003e","brand":"Espressif","offers":[{"title":"Default Title","offer_id":51612949578030,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/17746-ESP-WROOM-32EU__16MB__ESP32_WiFi-BT-BLE_MCU_Module_ECO_V3_UFL-02.webp?v=1767869831"},{"product_id":"sparkfun-micromod-esp32-processor","title":"SparkFun MicroMod ESP32 Processor","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe MicroMod ESP32 Processor Board combines Espressif's ESP32 with our M.2 connector interface to bring a processor board with reliable wireless capabilities into our MicroMod ecosystem. With the M.2 MicroMod connector, connecting your ESP32 Processor is a breeze. Simply match up the key on your processor's beveled edge connector to the key on the M.2 connector and secure it with a screw (included with all Carrier Boards). If you need to swap out your processor for a strong wireless option, make sure to check out the MicroMod ESP32!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe ESP32 includes a laundry list of functionality, including the dual-core Tensilica LX6 microprocessor, 240MHz clock frequency, 520kB internal SRAM, integrated WiFi transceiver and hardware accelerated encryption (AES, SHA2, ECC, RSA-4096). With this MicroMod processor board, you have access to 8 general use IO pins, dedicated analog, digital, and PWM pins, as well as all the fan favorites - SPI, I2C, UART, and SDIO. Add to that 16MB flash storage and you've got a perfect storm of versatility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eESP32 General Features:\u003cbr\u003eDual-core Tensilica LX6 microprocessor\u003cbr\u003eUp to 240MHz clock frequency\u003cbr\u003e520kB internal SRAM\u003cbr\u003e128mbit\/16MB flash storage\u003cbr\u003eIntegrated 802.11 BGN WiFi transceiver\u003cbr\u003e2.7 to 3.6V operating range\u003cbr\u003e10-electrode capacitive touch support\u003cbr\u003eHardware accelerated encryption (AES, SHA2, ECC, RSA-4096)\u003cbr\u003eSpecific Peripherals made available on MicroMod ESP32:\u003c\/p\u003e\n\u003cp\u003e1x USB dedicated for programming and debug\u003cbr\u003e1x UART\u003cbr\u003e2x I2C\u003cbr\u003e1x SPI\u003cbr\u003e7x GPIO\u003cbr\u003e2x Digital Pins\u003cbr\u003e2x Analog Pins\u003cbr\u003e2x PWM\u003cbr\u003eStatus LED\u003cbr\u003eVIN Level ADC\u003cbr\u003eAdditional peripherals are available but are shared on dedicated MicroMod pins.\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51612952756526,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/16781-SparkFun_MicroMod_ESP32_Processor-03.webp?v=1767870349"},{"product_id":"sparkfun-esp32-thing-plus-dmx-to-led-shield","title":"SparkFun ESP32 Thing Plus DMX to LED Shield","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SparkFun ESP32 Thing Plus DMX to LED Shield is the perfect way to send and receive DMX data. Whether it's coming in via the onboard XLR-3 jack or ArtNet, or outputting over the XLR-3 Jack\/ArtNet, this shield has you covered! It's the perfect way to get started developing your own custom DMX fixtures, or even adding ArtNet capabilities to a current fixture. It also holds up to the DMX standard which requires electrical isolation between the controller and communication side to avoid ground loops.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe DMX to LED Shield can be powered either through the screw terminals or the USB connection from your microcontroller that's plugged into the shield. The screw terminal is a 2-pin 3.5 mm screw terminal capable of accepting 26-16 AWG wire with a strip length of ~5-6mm. Please note that you should always power the shield with 5V to provide proper power for RS485.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe outputs are broken out to poke home connectors ordered to match up with APA102 LED strips and LuMini devices. The DMX to LED shield is designed to work with the SparkFun Thing Plus - ESP32 WROOM or any board with a Feather footprint, so Feathers and Feather-Wings will fit it. Since many Feather boards are 3.3V logic, there is a logic level converter between the microcontroller and LED data pins to bring the poke home connectors up to 5V logic.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSizing (approx): 2.625 (L) x 2.7 (W) x 1.375 (H)\u003cbr\u003e3 mounting holes for 4-40 screws\u003cbr\u003ePopulated female headers for the ESP32 Thing Plus to interface to\u003cbr\u003eScrew terminal for 5VDC power input\u003cbr\u003eCompatible with 26-16 AWG wire\u003cbr\u003e3-Pin XLR connections\u003cbr\u003eXLR-3 female connector\u003cbr\u003eXLR-3 male connector\u003cbr\u003ePoke-home connector allows for sturdy but temporary addressable LED connection without soldering\u003cbr\u003eCompatible with 24-18 AWG wire\u003cbr\u003eOptocouplers for power isolation\u003cbr\u003eCommon Mode Rejection (CMR) at 1000V\/ μs\u003cbr\u003e5V DC-DC converter with isolation for ground loops\u003cbr\u003eOutput: 5V at 200 mA\u003cbr\u003eIsolation voltage of 1 kVDC (1 min.)\u003cbr\u003eIsolation resistance of 1 GΩ\u003cbr\u003e3.3 V to 5 V Logic converters between LED poke-home connectors and Feather headers\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51612966781230,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/15110-SparkFun_ESP32_Thing_Plus_DMX_to_LED_Shield-06.webp?v=1767871579"},{"product_id":"neutis-development-kit","title":"Neutis Development Kit","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHeads up! The company that produced the Neutis Development Kit no longer supports it. As such, we are no longer able to provide support or documentation for this board. The Neutis Development Kit will no longer be available for purchase once we run out of stock. We apologize for any inconvenience this may cause!\u003cbr\u003eEver since the Edison left us we've been looking for an equal or greater replacement to fill the hole in our hearts. Introducing the Neutis Development Kit from Emlid! This Quad Core System on a Module in a dev kit is perfect for makers and developers.\u003c\/p\u003e\n\u003cp\u003eThe Neutis N5 Module is loaded with features and this Development Kit makes those features easier to access. Utilizing Neutis’ BSP based on Yocto, the system arrives with an up to date Linux kernel. The system is powered by a 64-bit ARM Cortex-A53 and a ARM Mali450 MPR GPU. It has 512MB of RAM and 8GB eMMC storage. For connectivity, there are a plethora of wired and wireless options at your disposal. For wireless needs, the system rocks 802.11 b\/g\/n and Bluetooth 4.0 dual-mode BLE all with the built-in antenna.\u003c\/p\u003e\n\u003cp\u003eThe development board also adds a MicroSD slot for more storage, an Ethernet port, USB connectors, and more.\u003c\/p\u003e\n\u003cp\u003eIn today’s environment, we can’t forget about security. The Neutis Development kit comes with the ATECC508A Secure Element for storing cryptographic keys, unique IDs, and supports the creation of FIPS random numbers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNeutis N5 Module\u003cbr\u003eNeutis Development Board\u003cbr\u003eCamera\u003cbr\u003eUSB OTG cable -- Mini B male to A female cable\u003cbr\u003eUSB Cable -- Mini B male to A male cable\u003cbr\u003eJumper Cables -- Female to male cables\u003cbr\u003eHeatsink\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProcessor Quad Core 64 bit Arm Cortex-A53 with a max frequency of 1.3 GHz\u003cbr\u003eGPU: Mali 450 MP4\u003cbr\u003eRAM: 512MB DDR3\u003cbr\u003eStorage Memory: 8GB\u003cbr\u003eWi-Fi: 802.11 b\/g\/n\u003cbr\u003eBluetooth: 4.0 Dual-Mode BLE\u003cbr\u003eOperating Temperature: -20 C to +70C\u003cbr\u003eStorage Temperature: -40C to +85C\u003cbr\u003eBoard Connectors: 2x DF40 80-pin\u003cbr\u003eAntenna: Onboard Ceramic\u003cbr\u003eSDIO: Micro SD Card Slot\u003cbr\u003eVideo Out Interface: HDMI\u003cbr\u003eWired Connectivity: USB Host, USB OTG, Ethernet, UART, I2C, SPI, and more!\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51612970975534,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/14972-Neutis_Development_Kit-07.webp?v=1767872219"},{"product_id":"beagleplay","title":"BeaglePlay","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBeaglePlay is an open-source single board computer designed to simplify the process of adding sensors, actuators, indicators, human interfaces, and connectivity to a reliable embedded system. It features a powerful 64-bit, quad-core processor and innovative connectivity options, including WiFi, Gigabit Ethernet, sub-GHz wireless, and single-pair Ethernet with power-over-data-line. With compatibility with 1,000s of off-the-shelf add-ons and a customized Debian Linux image, BeaglePlay makes expansion and customization easy. It also includes ribbon-cable connections for cameras and touch-screen displays, and a socket for a battery-backed real-time-clock, making it ideal for human-machine interface designs.\u003c\/p\u003e\n\u003cp\u003eBeaglePlay is built around Texas Instruments AM62x Sitara™ Processors which is a Quad-Core Arm® Cortex®-A53 Human-machine-interaction SoC. It comes with 2GB DDR4 RAM, 16GB eMMC storage, Full size HDMI, USB-A host port, USB-C power \u0026amp; connectivity port, serial debug interface, and much more.\u003c\/p\u003e\n\u003cp\u003eThe BeaglePlay also includes a Qwiic connector. The SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProcessor: TI AM6254 (multicore A53s with R5, M4s and PRUs)\u003cbr\u003ePMIC: TPS6521901\u003cbr\u003eMemory: 2GB DDR4\u003cbr\u003eStorage: 16GB eMMC\u003cbr\u003eWiFi:\u003cbr\u003ePHY: WL1807MOD (roadmap to next-gen TI CC33XX WiFi 6 \u0026amp; BLE)\u003cbr\u003eAntennas: 2.4GHz \u0026amp; 5GHz\u003cbr\u003eBLE\/SubG:\u003cbr\u003eCC1352P7 M4+M0 with BeagleConnect firmware\u003cbr\u003eBeagleConnect Wireless enabled\u003cbr\u003eAntennas: 2.4GHz \u0026amp; SubG IEEE802.15.4 software defined radio (SDR)\u003cbr\u003eEthernet:\u003cbr\u003ePHY: Realtek RTL8211F-VD-CG Gigabit Ethernet phy\u003cbr\u003eConnector: integrated magnetics RJ-45\u003cbr\u003eSingle-pair Ethernet:\u003cbr\u003eBeagleConnect Wired enabled\u003cbr\u003ePHY: DP83TD510E 10Mbit 10BASE-T1L single-pair Ethernet phy\u003cbr\u003eConnector: RJ-11 jack\u003cbr\u003ePower (PoDL): Input: N\/A (protection to 12V), Output: 5V @ 250mA\u003cbr\u003eUSB type-C:\u003cbr\u003ePD\/CC: None, HS shorted to both sides\u003cbr\u003ePower: Input: 5V @ 3A, Output: N\/A (USB-C DRP Not supported)\u003cbr\u003eHDMI:\u003cbr\u003eTransmitter: IT66121\u003cbr\u003eConnector: full-size\u003cbr\u003eOther Connectors:\u003cbr\u003emicroSD\u003cbr\u003eUSB 2.0 type-A (480Mbit)\u003cbr\u003emikroBUS connector (I2C\/UART\/SPI\/MCAN\/MCASP\/PWM\/GPIO)\u003cbr\u003eGrove connector (I2C\/UART\/ADC\/PWM\/GPIO)\u003cbr\u003eQWIIC connector (I2C)\u003cbr\u003eCSI connector compatible with BeagleBone AI-64, Raspberry Pi Zero \/ CM4 (22-pin)\u003cbr\u003eOLDI connector (40-pin)\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51617792164142,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/22659-_DEV-_02.webp?v=1768026922"},{"product_id":"arduino-uno-r4-wifi","title":"Arduino UNO R4 WiFi","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eArduino empowers makers’ creativity and passion for innovation with a robust new board that’s perfect for all users, from beginners to experts – allowing anyone to easily connect to the internet and create IoT projects.\u003c\/p\u003e\n\u003cp\u003eYour user-friendly, accessible UNO just took a quantum leap forward: Arduino UNO R4 is a 32-bit microprocessor offering more speed, memory, connectors and connectivity options than any version of the board before. Out of this world, and into the future.\u003c\/p\u003e\n\u003cp\u003eThe UNO universe expands with UNO R4 WiFi: the same industry-standard form factor at 5V operating voltage, but with the enhanced performance of a RA4M1 32-bit microcontroller by Renesas with ESP32-S3-MINI coprocessor – for increased computational power, memory and speed – as well as Wi-Fi® and Bluetooth® connectivity, a 12 x 8 LED matrix, and a Qwiic connector.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOperating Voltage: 5V\u003cbr\u003eMemory: 256KB Flash \/ 32KB SRAM\u003cbr\u003eInput Voltage: 6-24V\u003cbr\u003eClock Speed: 48 MHz\u003cbr\u003eProgramming Port: USB-C\u003cbr\u003eMCU: RA41M1 from Renesas (Cortex M4)\u003cbr\u003eWiFi\/BLE: ESP32-S3-MINI\u003cbr\u003eHID device (emulate a mouse or a keyboard)\u003cbr\u003eImproved power section (up to 24V through VIN)\u003cbr\u003eCAN bus\u003cbr\u003eDAC (12 bits)\u003cbr\u003eOp amp\u003cbr\u003eWiFi® \/ Bluetooth® Low Energy\u003cbr\u003eFully-addressable LED matrix with 96 red LEDs (12x8)\u003cbr\u003eQwiic I2C connector\u003cbr\u003eRTC (with support for a buffer battery)\u003cbr\u003eRuntime errors diagnostics\u003c\/p\u003e","brand":"Arduino","offers":[{"title":"Default Title","offer_id":51617792262446,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/22632-_03.webp?v=1768027030"},{"product_id":"espressif-esp8266ex","title":"Espressif ESP8266EX","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEspressif’s ESP8266EX delivers highly integrated Wi-Fi SoC solution to meet users’ continuous demands for efficient power usage, compact design and reliable performance in the Internet of Things industry.\u003c\/p\u003e\n\u003cp\u003eWith complete and self-contained Wi-Fi networking capabilities, ESP8266EX can perform either as a standalone application or as a peripheral to a host MCU. When ESP8266EX hosts the application, it promptly boots up from the flash. The integrated highspeed cache helps to increase the system performance and optimize the system memory. Also, ESP8266EX can be applied to any microcontroller design as a Wi-Fi adapter through SPI\/SDIO or UART interfaces.\u003c\/p\u003e\n\u003cp\u003eESP8266EX integrates antenna switches, RF balun, power amplifier, low noise receive amplifier, filters and power management modules. The compact design minimizes the PCB size and requires minimal external circuitries.\u003c\/p\u003e\n\u003cp\u003eBesides the Wi-Fi functionalities, ESP8266EX also integrates an enhanced version of Tensilica’s L106 Diamond series 32-bit processor and on-chip SRAM. It can be interfaced with external sensors and other devices through the GPIOs.\u003c\/p\u003e\n\u003cp\u003eSold as individual units.\u003c\/p\u003e\n\u003cp\u003eNOTE: Not recommended for new designs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProtocol: 802.11 b\/g\/n (HT20)\u003cbr\u003eFrequency Range: 2.4GHz ~ 2.5GHz (2400MHz ~ 2483.5MHz)\u003cbr\u003eOperating Voltage: 2.5V ~ 3.6V\u003cbr\u003eOperating Current: Average value: 80mA\u003cbr\u003eOperating Temperature Range: –40°C ~ 125°C\u003c\/p\u003e","brand":"Espressif","offers":[{"title":"Default Title","offer_id":51617792655662,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/26983-Front.webp?v=1768027138"},{"product_id":"wizfi360-evb-pico","title":"WizFi360-EVB-Pico","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWizFi360-EVB-Pico is based on Raspberry Pi RP2040 and adds WiFi connectivity using WizFi360. It is pin compatible with Raspberry Pi Pico board and can be used for IoT Solution development.\u003c\/p\u003e\n\u003cp\u003eWizFi-EVB-Pico pinout is directly connected to the GPIO of RP2040. It has the same pinout as the Raspberry Pi Pico board. However, GPIO4, GPIO5, GPIO6, GPIO7, GPIO20 are connected to WizFi360 inside the board. These pins enable UART communication with WizFi360 to use WiFi function. If you are using the WiFi function, these pins cannot be used for any other purpose.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRP2040 microcontroller with 2MByte Flash\u003cbr\u003eDual-core cortex M0+ at up to 133MHz\u003cbr\u003e264kByte multi-bank high performance SRAM\u003cbr\u003eExternal Quad-SPI Flash with eXecute In Place (XIP)\u003cbr\u003eIncludes WizFi360-PA\u003cbr\u003eWiFi 2.4G, 802.11 b\/g\/n\u003cbr\u003eSupport Station \/ SoftAP \/ SoftAP+Station operation modes\u003cbr\u003eSupport “Data pass-through” and “AT command data transfer” mode\u003cbr\u003eSupport serial AT command configuration\u003cbr\u003eSupport TCP Server \/ TCP Client \/ UDP operating mode\u003cbr\u003eSupport configuration of operating channel 0 ~ 13\u003cbr\u003eSupport auto 20MHz \/ 40MHz bandwidth\u003cbr\u003eSupport WPA_PSK \/ WPA2_PSK encryption\u003cbr\u003eSupport built-in unique MAC address and user configurable\u003cbr\u003eIndustrial grade (operating temperature range: -40 ° C ~ 85 ° C)\u003cbr\u003eCE, FCC certification\u003cbr\u003eIncludes 16M-bit Flash Memory\u003cbr\u003eMicro-USB B port for power and data (and for reprogramming the Flash)\u003cbr\u003e40 pin 21x51 'DIP' style 1mm thick PCB with 0.1\" through-hole pins also with edge castellations\u003cbr\u003e3-pin ARM Serial Wire Debug (SWD) port\u003cbr\u003eBuilt-in LDO\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51617794785582,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/19959-WizFi360-EVB-Pico-04.webp?v=1768027475"},{"product_id":"sparkfun-azurewave-thing-plus-aw-cu488","title":"SparkFun AzureWave Thing Plus - AW-CU488","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SparkFun AzureWave Thing Plus is a Feather form-factor development board equipped with the AW-CU488. The module features the Realtek RTL8721DM integrated single-chip low-power dual-band (2.4GHz and 5GHz) wireless LAN communication controller. It also consists of a dual processor core: Real-M300 CPU (ARMv8-M, Cortex-M33) and Real-M200 CPU (ARMv8-M, Cortex-M23). Connect the SparkFun AzureWave Thing Plus to the cloud to grab current weather conditions in your area, post sensor data to a server, control the lights in your next home automation project, or even calculate the Fast Fourier Transform (FFT) of an input audio signal!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eWhy the name? We lovingly call it the “Thing” because it's perfect for your Internet of Things project. The Thing does everything from turning on an LED to posting data with your chosen platform and can be programmed just like any microcontroller. You can even program the Thing through the Arduino IDE by installing the Realtek Arduino core.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe board includes a USB-C connector for programming and power. Two buttons for reset and boot are also populated on the board. For those that need to go remote with their application, the board includes a 2-pin JST connector and the MCP73831 single cell, LiPo charge IC (set to a default rate of 500mA). Voltage is regulated down for the AW-CU488 with the XC6222 3.3V\/700mA voltage regulator. Three status LEDs are available for power, charging, and status. Due to the size of the module, the board is slightly longer than the standard Thing Plus footprint. With the added length, we were able to break out a few more PTHs on the edge of the board for a total of 30 GPIO pins (30 Interrupts, seven Analog, 11 PWM, two UARTs, two SPI, and a single I2C). The board also includes a built-in audio CODEC with two channel analog inputs and outputs at various sample rates (8\/12\/16\/24\/32\/48\/...\/176.4 kHz). On the back of the board are five jumpers for the LiPo charge rate, LED, auto boot circuit, and USB shielding. Finally, one Qwiic connector is populated on the board to easily add Qwiic-enabled I2C devices to your projects!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eNote: Additional items found in our photos are not included with the SparkFun AzureWave Thing Plus. You will need to purchase these components separately. Check the Hookup Accessories section below for options.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAzureWave AW-CU488 Module\u003cbr\u003eup to 200MHz operating frequency\u003cbr\u003e512KB SRAM and 4MB PSRAM\u003cbr\u003e32Mbit SPI Flash\u003cbr\u003eRealtek RTL8721DM Dual Processor Core\u003cbr\u003eReal-M300 CPU (Armv8-M, Cortex-M33)\u003cbr\u003eReal-M200 CPU (Armv8-M, Cortex-M23)\u003cbr\u003e2.4GHz\/5GHz WiFi 802.11a\/b\/g\/n 1T1R WLAN\u003cbr\u003eBuilt-in Antenna w\/ Internal Shielding Antenna\u003cbr\u003e2-Channel Audio CODEC (8\/12\/16\/24\/32\/48\/...\/176.4 KHz)\u003cbr\u003eThing Plus (or Feather) Form-Factor\u003cbr\u003eBreadboard-compatible 0.1\" (2.54 mm) pitch headers\u003cbr\u003eDimensions: 3.05\" x 0.90\" (77.47 mm x 22.86 mm)\u003cbr\u003e30x Available GPIO\u003cbr\u003eUp to 30x INT\u003cbr\u003eUp to 7x 12-bit ADC\u003cbr\u003eUp to 11x PWM\u003cbr\u003eUp to 2x UARTs\u003cbr\u003eUp to 2x SPI\u003cbr\u003eUp to 1x I2C\u003cbr\u003eTwo Mounting Holes\u003cbr\u003e4-40 screw compatible\u003cbr\u003e38x PTH Pins\u003cbr\u003e1x USB Type C Connector\u003cbr\u003e1x 2-pin JST Connector for a LiPo Battery (not included)\u003cbr\u003e1x 4-pin Qwiic Connector\u003cbr\u003eCP210X USB-to-Serial Converter\u003cbr\u003eMCP73831 Single Cell, LiPo Charge IC\u003cbr\u003eCharge Rate Set to 500mA (default)\u003cbr\u003eButtons\u003cbr\u003eBoot\u003cbr\u003eReset\u003cbr\u003eLEDs\u003cbr\u003ePower\u003cbr\u003eCharge\u003cbr\u003eStatus\u003cbr\u003eJumpers\u003cbr\u003ePower LED\u003cbr\u003eLiPo Charge Rate (500mA\/100mA)\u003cbr\u003eAuto Reset Circuit\u003cbr\u003eUSB Shielding\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51617796718894,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/SparkFun_AzureWave_Thing_Plus_AW-CU488_01.webp?v=1768027615"},{"product_id":"alfa-network-wifi-halow-hat","title":"ALFA Network WiFi HaLow HAT","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AHPI7292S is the world's first WiFi HaLow™ Raspberry Pi™ HAT module from Alfa Network. Similar to LoRa, WiFi HaLow is a new designation from the WiFi Alliance for 802.11ah technology which operates in the sub-gigahertz range. This brings a more IoT friendly long-range and Low-power technology to WiFi style communication. The AHPI7292S brings this wireless technology to the Raspberry Pi form factor with a HAT that works with Raspberry Pi 3B+ and 4 line. It supports both standalone and host based modes with up to 15Mbps throughput. An included SDK makes for a excellent getting started experience.\u003c\/p\u003e\n\u003cp\u003eAntenna sold separately. Please check out the related products for our antenna choice for this. This version of the board has the SMA connector and not the U.FL connector.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChipset - Newracom™ NRC7292\u003cbr\u003eFrequency - 915 MHz (US)\u003cbr\u003eData rate - 150 Kbps ~ 15 Mbps\u003cbr\u003eChannel bandwidth - 1\/2\/4 MHz\u003cbr\u003eAntenna connector - SMA\u003cbr\u003eInterfaces\u003cbr\u003eSPI\u003cbr\u003eUART\u003cbr\u003eI2C\u003cbr\u003eOn-board LEDs\u003cbr\u003e1 x Power\u003cbr\u003e1 x TX\u003cbr\u003e1 x RX\u003cbr\u003eHAT Form Factor\u003cbr\u003eDimensions - 65mm x 56mm x 10.3mm\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51617797636398,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/19956-ALFA_Network_WiFi_HaLow_HAT-04.webp?v=1768027802"},{"product_id":"sparkfun-micromod-wifi-function-board-da16200","title":"SparkFun MicroMod WiFi Function Board - DA16200","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SparkFun MicroMod DA16200 Function Board adds a fully integrated WiFi module with a 40MHz crystal oscillator, 32.768KHz RTC, Lumped RF filter, 4MB flash memory, and an on-board chip antenna to any MicroMod project. With the addition of JTAG connectors for deep dive programming, you've got everything you need to get your MicroMod setup ready for your next IoT project.\u003c\/p\u003e\n\u003cp\u003eThe SparkFun MicroMod DA16200 Function Board is ideal for MicroMod projects involving door locks, thermostats, sensors, pet trackers, and other home IoT projects, thanks in part to the multiple sleep modes that allow you to take advantage of current draws as low as 0.2uA-3.5uA.\u003c\/p\u003e\n\u003cp\u003eAdditionally, the DA16200 module's certified WiFi alliance for IEEE802.11b\/g\/n, WiFi Direct, and WPS functionalities means that it has been approved for use by multiple countries and using the WiFi Alliance transfer policy, each WiFi Certification can be transferred without being tested again.\u003c\/p\u003e\n\u003cp\u003eNote: A MicroMod Processor and Main Board are not included with this MicroMod WiFi Function Board. These boards will need to be purchased separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eArm® Cortex®-M4F core w\/ clock frequency of 30~160 MHz\u003cbr\u003eWiFi processor\u003cbr\u003eIEEE 802.11b\/g\/n, 1x1, 20MHz channel bandwidth, 2.4GHz\u003cbr\u003eIEEE 802.11s Wi-Fi mesh\u003cbr\u003eWiFi security: WPA\/WPA2-Enterprise\/Personal, WPA2 SI, WPA3 SAE, and OWE\u003cbr\u003e32 M-bit \/ 4 M-byte SPI flash Memory\u003cbr\u003e2 UARTs\u003cbr\u003eOn-Chip RTC\u003cbr\u003eThree ultra-low power sleep modes\u003cbr\u003eSleep current: 3.5uA\u003cbr\u003eOperating voltage: 2.1V to 3.6V\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51617799143726,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/18594-MicroMod_DA16200_Function_Board-04.webp?v=1768027911"},{"product_id":"sparkfun-qwiic-wifi-shield-da16200","title":"SparkFun Qwiic WiFi Shield - DA16200","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUltra. Low. Power. Arguably the best three words in the IoT world. SparkFun has teamed up with ARM and Dialog to provide you with this Qwiic WiFi Shield based around the DA16200 module. The DA16200 is a fully integrated WiFi module with a 40MHz crystal oscillator, 32.768KHz RTC clock, RF Lumped RF filter, 4MB flash memory, and an on-board chip antenna. With the addition of a Qwiic connector, multiple GPIO options, JTAG connectors for deep dive programming, and you've got everything you need to get your R3 layout device ready to set up your next IoT project.\u003c\/p\u003e\n\u003cp\u003eThe SparkFun Qwiic WiFi Shield is ideal for door locks, thermostats, sensors, pet trackers, and other home IoT projects, thanks in part to the multiple sleep modes that allow you to take advantage of current draws as low as 0.2uA-3.5uA.\u003c\/p\u003e\n\u003cp\u003eAdditionally, the DA16200 module's certified WiFi alliance for IEEE802.11b\/g\/n, WiFi Direct, and WPS functionalities means that it has been approved for use by multiple countries and using the WiFi Alliance transfer policy, each WiFi Certification can be transferred without being tested again.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Please be aware that logic voltage for the Qwiic DA16200 WiFi Shield is 3.3V only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eArm® Cortex®-M4F core w\/ clock frequency of 30~160 MHz\u003cbr\u003eWiFi processor\u003cbr\u003eIEEE 802.11b\/g\/n, 1x1, 20MHz channel bandwidth, 2.4GHz\u003cbr\u003eIEEE 802.11s Wi-Fi mesh\u003cbr\u003eWiFi security: WPA\/WPA2-Enterprise\/Personal, WPA2 SI, WPA3 SAE, and OWE\u003cbr\u003e32 M-bit \/ 4 M-byte SPI flash Memory\u003cbr\u003e2 UARTs\u003cbr\u003eOn-Chip RTC\u003cbr\u003eThree ultra-low power sleep modes\u003cbr\u003eSleep current: 3.5uA\u003cbr\u003eOperating voltage: 2.1V to 3.6V\u003cbr\u003eQwiic Connector for Arduino\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51617799766318,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/18567-SparkFun_Qwiic_WiFi_Shield_-_DA16200-04.webp?v=1768028009"},{"product_id":"wifi-module-esp8266-4mb-flash","title":"WiFi Module - ESP8266 (4MB Flash)","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ESP8266 WiFi Module is a self contained SOC with integrated TCP\/IP protocol stack that can give any microcontroller access to your WiFi network. The ESP8266 is capable of either hosting an application or offloading all WiFi networking functions from another application processor. Each ESP8266 module comes pre-programmed with an AT command set firmware, meaning, you can simply hook this up to your Arduino device and get about as much WiFi-ability as a WiFi Shield offers (and that's just out of the box)! The ESP8266 module is an extremely cost effective board with a huge, and ever growing, community.\u003c\/p\u003e\n\u003cp\u003eThis module has a powerful enough on-board processing and storage capability that allows it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, including the front-end module, is designed to occupy minimal PCB area. The ESP8266 supports APSD for VoIP applications and Bluetooth co-existance interfaces, it contains a self-calibrated RF allowing it to work under all operating conditions, and requires no external RF parts.\u003c\/p\u003e\n\u003cp\u003eThere is an almost limitless fountain of information available for the ESP8266, all of which has been provided by amazing community support. In the Documents section below you will find many resources to aid you in using the ESP8266, even instructions on how to transform this module into an IoT (Internet of Things) solution!\u003c\/p\u003e\n\u003cp\u003eNote: The ESP8266 Module is not capable of 5-3V logic shifting and will require an external Logic Level Converter. Please do not power it directly from your 5V dev board.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e802.11 b\/g\/n\u003cbr\u003eWi-Fi Direct (P2P), soft-AP\u003cbr\u003eIntegrated TCP\/IP protocol stack\u003cbr\u003eIntegrated TR switch, balun, LNA, power amplifier and matching network\u003cbr\u003eIntegrated PLLs, regulators, DCXO and power management units\u003cbr\u003e+19.5dBm output power in 802.11b mode\u003cbr\u003ePower down leakage current of \u0026lt;10uA\u003cbr\u003e4MB Flash Memory\u003cbr\u003eIntegrated low power 32-bit CPU could be used as application processor\u003cbr\u003eSDIO 1.1 \/ 2.0, SPI, UART\u003cbr\u003eSTBC, 1×1 MIMO, 2×1 MIMO\u003cbr\u003eA-MPDU \u0026amp; A-MSDU aggregation \u0026amp; 0.4ms guard interval\u003cbr\u003eWake up and transmit packets in \u0026lt; 2ms\u003cbr\u003eStandby power consumption of \u0026lt; 1.0mW (DTIM3)\u003c\/p\u003e","brand":"Espressif","offers":[{"title":"Default Title","offer_id":51617806319918,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/17146-WiFi_Module_-_ESP8266__4MB_-02.webp?v=1768028129"},{"product_id":"sparkfun-wifi-ir-blaster-esp8266","title":"SparkFun WiFi IR Blaster (ESP8266)","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDo you want to control your TV via a web-browser? Want to ask Alexa to mute your stereo? Want to schedule triggers to your IR-controlled LED strip? These are all applications that the WiFi IR Blaster is perfect for. The SparkFun WiFi IR Blaster is designed to connect all of those old, legacy IR-controlled devices to a WiFi network exposing them to a new method of control with the Internet of Things.\u003c\/p\u003e\n\u003cp\u003eThe WiFi IR Blaster combines an ESP8266 – a powerful WiFi\/microcontroller SoC – with IR emitters and receivers. With built-in WiFi support, the ESP8266 can be programmed to provide an interface between HTTP, MQTT, TCP, and infrared-controlled devices. This module equips the ESP8266 with a crystal, 4MB flash, and a PCB antenna – just about everything it needs to get going. Please be aware that the antenna sits under the SparkFun logo on the board, so try not to place anything that may interfere with WiFi signals near that area.\u003c\/p\u003e\n\u003cp\u003eThe IR emitter and detector components are packaged with the board, but not soldered in place. This allows you to solder both components at any angle your project requires. It also leaves the option to customize the board and spec out your own emitter and\/or receiver. So some soldering will be required to get the WiFi IR Blaster operational.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1x SparkFun WiFi IR Blaster\u003cbr\u003e1x LTE-302 IR Emitter\u003cbr\u003e1x TSOP382 IR Detector\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51617806942510,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/15031-SparkFun_WiFi_IR_Blaster__ESP8266_-04.webp?v=1768028510"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/collections\/Wifi.jpg?v=1770033692","url":"https:\/\/taalimiyah.com\/collections\/wifi.oembed?page=4","provider":"Taalimiyah","version":"1.0","type":"link"}