{"title":"Wireless Kits","description":"","products":[{"product_id":"particle-xenon-iot-development-kit","title":"Particle Xenon IoT Development Kit","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Particle Xenon is a low-cost mesh-enabled development board. With the Nordic nRF52840 SoC you have all the power of an ARM Cortex M4 with OpenThread mesh networking, NFC, plenty of GPIOs, LiPo charging and more. The board is designed to act as a standalone endpoint or repeater in a Particle Mesh network.\u003c\/p\u003e\n\u003cp\u003eThis IoT development kit from Particle includes the Xenon development board, a mini breadboard, and a USB cable. The starter project includes two resistors of 220Ω, one red LED, and one photodiode.\u003c\/p\u003e\n\u003cp\u003eThe Xenon is also configured in the popular Feather footprint and so is compatible with Feather Shields! This includes a JST connector for a Li-po battery as well as charging of the battery over USB. Particle also provides an RGB status LED and a JTAG (SWD) connector for debugging and an onboard PCB antenna for your mesh network.\u003c\/p\u003e\n\u003cp\u003eThe Xenon comes with access to the Device Cloud (10 free micro networks available) as well as three free months of device Cloud access using a cellular gateway. The Particle Could has some great features for building connected projects, including over-the-air firmware updates, and easy-to-use REST API, and firmware development supported by web and local IDEs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eXenon IoT Development Board\u003cbr\u003eBreadboard\u003cbr\u003eUSB Cable\u003cbr\u003e2x 220 Ohm Resistor\u003cbr\u003e1x Red LED\u003cbr\u003e1x Photodiode\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNordic Semiconductor nRF52840 SoC\u003cbr\u003eARM Cortex-M4F 32-bit processor @ 64MHz\u003cbr\u003e1MB flash, 256KB RAM\u003cbr\u003eIEEE 802.15.4 - 2006: 250Kbps\u003cbr\u003eBluetooth 5: 2Mbps, 1Mbps, 500Kbps, 125Kbps\u003cbr\u003eSupports DSP insturctions, HW accelerated Floating Point Unit (FPU) calculations\u003cbr\u003eARM TrustZone CryptoCell-310 Cryptographic and security module\u003cbr\u003eUp to +8 dBm TX power (down to -20dBm in 4dB steps)\u003cbr\u003eNFC-A tag\u003cbr\u003eOn-board additional 4MB SPI flash\u003cbr\u003e20 mixed signal GPIO (6x Analog, 8x PWM), UART, I2C, SPI\u003cbr\u003eIntegrated Li-Po charging and battery connector\u003cbr\u003eJTAG (SWD) Connector\u003cbr\u003eRGB status LED\u003cbr\u003eReset and Mode buttons\u003cbr\u003eOn-board PCB antenna for mesh network\u003cbr\u003eu.FL connectors for external antennas for mesh network, and NFC\u003cbr\u003eFCC, CE, and IC certified. RoHS compliant\u003c\/p\u003e","brand":"Particle Xenon","offers":[{"title":"Default Title","offer_id":51612969959726,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/15070-Particle_Xenon_IoT_Development_Board-04.webp?v=1767872007"},{"product_id":"neutis-development-kit","title":"Neutis Development Kit","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHeads up! The company that produced the Neutis Development Kit no longer supports it. As such, we are no longer able to provide support or documentation for this board. The Neutis Development Kit will no longer be available for purchase once we run out of stock. We apologize for any inconvenience this may cause!\u003cbr\u003eEver since the Edison left us we've been looking for an equal or greater replacement to fill the hole in our hearts. Introducing the Neutis Development Kit from Emlid! This Quad Core System on a Module in a dev kit is perfect for makers and developers.\u003c\/p\u003e\n\u003cp\u003eThe Neutis N5 Module is loaded with features and this Development Kit makes those features easier to access. Utilizing Neutis’ BSP based on Yocto, the system arrives with an up to date Linux kernel. The system is powered by a 64-bit ARM Cortex-A53 and a ARM Mali450 MPR GPU. It has 512MB of RAM and 8GB eMMC storage. For connectivity, there are a plethora of wired and wireless options at your disposal. For wireless needs, the system rocks 802.11 b\/g\/n and Bluetooth 4.0 dual-mode BLE all with the built-in antenna.\u003c\/p\u003e\n\u003cp\u003eThe development board also adds a MicroSD slot for more storage, an Ethernet port, USB connectors, and more.\u003c\/p\u003e\n\u003cp\u003eIn today’s environment, we can’t forget about security. The Neutis Development kit comes with the ATECC508A Secure Element for storing cryptographic keys, unique IDs, and supports the creation of FIPS random numbers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNeutis N5 Module\u003cbr\u003eNeutis Development Board\u003cbr\u003eCamera\u003cbr\u003eUSB OTG cable -- Mini B male to A female cable\u003cbr\u003eUSB Cable -- Mini B male to A male cable\u003cbr\u003eJumper Cables -- Female to male cables\u003cbr\u003eHeatsink\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProcessor Quad Core 64 bit Arm Cortex-A53 with a max frequency of 1.3 GHz\u003cbr\u003eGPU: Mali 450 MP4\u003cbr\u003eRAM: 512MB DDR3\u003cbr\u003eStorage Memory: 8GB\u003cbr\u003eWi-Fi: 802.11 b\/g\/n\u003cbr\u003eBluetooth: 4.0 Dual-Mode BLE\u003cbr\u003eOperating Temperature: -20 C to +70C\u003cbr\u003eStorage Temperature: -40C to +85C\u003cbr\u003eBoard Connectors: 2x DF40 80-pin\u003cbr\u003eAntenna: Onboard Ceramic\u003cbr\u003eSDIO: Micro SD Card Slot\u003cbr\u003eVideo Out Interface: HDMI\u003cbr\u003eWired Connectivity: USB Host, USB OTG, Ethernet, UART, I2C, SPI, and more!\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51612970975534,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/14972-Neutis_Development_Kit-07.webp?v=1767872219"},{"product_id":"sparkfun-digi-x-on-kit-for-lorawan®-europe","title":"Sparkfun Digi X-ON Kit for LoRaWAN® (Europe)","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Sparkfun Digi X-ON Kit for LoRaWAN® (Europe) contains everything you need to get an IoT system up and running within minutes. Containing an HX15 Gateway from Digi, the innovative SparkFun IoT Node for LoRaWAN® board, and SparkFun's dual-action ENS160\/BME280 (Qwiic) Environmental Combo Board, this kit takes the often convoluted and configuration-intensive effort to set up a LoRaWAN®-based IoT Device and makes it a breeze to get set up and connected.\u003c\/p\u003e\n\u003cp\u003eThe kit also includes a free 30-day subscription to Digi X-ON™ device management platform and free cellular connectivity.\u003c\/p\u003e\n\u003cp\u003eOut of the Box\u003cbr\u003eWith the integration of Digi X-ON technology, the SparkFun IoT Node for LoRaWAN® board allows the creation and deployment of a LoRaWAN® IoT sensor in minutes.\u003c\/p\u003e\n\u003cp\u003eSet up the Digi HX15 Gateway for LoRaWAN® and corresponding Digi account.  \u003cbr\u003eRegister the IoT Node – LoRaWAN® board quickly using the digital data block on the module.\u003cbr\u003eAdd the antenna and a supported Qwiic sensor to the Node board\u003cbr\u003ePower the board  \u003cbr\u003eThe SparkFun IoT Node for LoRaWAN® board is shipped with firmware installed that automatically connects to Digi X-ON, detects an attached sensor, and posts data to the X-ON cloud. Configured via a serial console connection, this application allows rapid evaluation and creation of a LoRaWAN® IoT device.  \u003c\/p\u003e\n\u003cp\u003eIn addition to the pre-installed firmware, full software customization and development are supported with the IoT Node for LoRaWAN® board.\u003c\/p\u003e\n\u003cp\u003eFirmware Development\u003cbr\u003eThe firmware development for the SparkFun IoT Node for LoRaWAN® board is performed primarily in the Arduino environment and enabled by an Arduino XBee® library from Digi. Combining the easy LoRaWAN® access provided by the Digi library with the wide range of Qwiic sensors available from SparkFun, the possibilities of potential LoRaWAN® IoT sensors are endless.\u003c\/p\u003e\n\u003cp\u003eThe pre-installed application is also open source and readily available, enabling rapid customization if desired.\u003c\/p\u003e\n\u003cp\u003eHardware\u003cbr\u003eAt the heart of the IoT Node for LoRaWAN® board is the RP2350 microprocessor from Raspberry Pi, supporting many development environments, including Arduino, micropython, and the Raspberry Pi pico SDK. Besides the capabilities the RP2350 provides, we’ve kitted out the processor with all the goodies your project might require:\u003c\/p\u003e\n\u003cp\u003e16 MB of flash\u003cbr\u003e8 MB PSRAM\u003cbr\u003eQwiic connector\u003cbr\u003eOn-board Lithium Ion (LiPo) battery charging\u003cbr\u003eFuel gauge circuits\u003cbr\u003emicroSD card  \u003cbr\u003eA variety of IO pins\u003cbr\u003eRGB LED and user button \u003cbr\u003eThe Digi XBee® LR module for LoRaWAN® module is directly connected to a serial port of the RP2350, allowing direct control and access to the LoRaWAN® module via a development library provided by Digi.\u003c\/p\u003e\n\u003cp\u003eThe XBee® LR for LoRaWAN® module is the latest LoRaWAN® module from Digi, delivering unmatched operational performance and onboarding simplicity. The Digi XBee® LR uses LoRa™ modulation for Non-Line-of-Sight (NLOS) two-way communications for long-range and high-noise RF environments. Automated connection and two-way device management are a breeze since each module is pre-activated on Digi's X-ON cloud platform.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDigi HX15 Gateway for LoRaWAN® (EU)\u003cbr\u003eInterfaces EU\u003cbr\u003eEthernet Backhaul: RJ-45, 10\/100\/1000 M\u003cbr\u003eCellular Backhaul: LTE Cat 1 or Cat M1\/NB-IoT multi-region, up to 10 Mbps, with 2G fallback for EU\u003cbr\u003eSupported Bands LTE: B1, B3, B7, B8, B20, B28A; 3G: B1, B8; 2G: B3, B8\u003cbr\u003eLTE SIM: Micro SIM (3FF), pre-activated SIM card included on LTE gateways\u003cbr\u003eCellular Antennas: LTE, 3G, 2G,3G (SMA type), omni-directional, 50 Ω, max. input 25 W\u003cbr\u003eLoRa SpecsRegional\u003cbr\u003eBands: EU868\u003cbr\u003eMax TX Power: +27 dBm\u003cbr\u003eRX Sensitivity: −138 dBm\u003cbr\u003eChannels: 8 Rx \/ 1 Tx\u003cbr\u003eLORA Antenna: −1.6 dBm (SMA type), 50 Ω, omni-directional, max. input 25 W\u003cbr\u003eSparkFun IoT Node for LoRaWAN®\u003c\/p\u003e\n\u003cp\u003eRaspberry Pi Foundation's RP2350A Microcontroller\u003cbr\u003e15 Multifunctional GPIO Pins\u003cbr\u003eUp to eight 2-channel PWMs\u003cbr\u003eUp to two UARTs\u003cbr\u003eUp to two I2C buses\u003cbr\u003eUp to two SPI buses\u003cbr\u003eExternal Memory\u003cbr\u003e16MB QSPI Flash Memory\u003cbr\u003e8MB PSRAM Memory\u003cbr\u003eDigi's XBee LR Module\u003cbr\u003eLoRaWAN Transceiver\u003cbr\u003eModular certifications for FCC and IC\u003cbr\u003eFrequency Range: SM 902 to 928 MHz, 868 to 870 MHz\u003cbr\u003eGeneral Features\u003cbr\u003eDimensions: 83mm x 59mm\u003cbr\u003eUSB-C Connectors:\u003cbr\u003eUSB 1.1 Host\/Device support\u003cbr\u003eXBLR\u003cbr\u003e2-pin JST Connector for LiPo Battery (not included)\u003cbr\u003e4-pin Qwiic Connector\u003cbr\u003eLiPo Charger:\u003cbr\u003eMCP73831 Charger Management Controller\u003cbr\u003eCharge rate: 500mA\u003cbr\u003eMAX17048 LiPo Fuel Gauge\u003cbr\u003eXBLR\/UART Selection Switch\u003cbr\u003eLEDs:\u003cbr\u003ePWR - Red 3.3V power indicator\u003cbr\u003eCHG - Yellow battery charging indicator\u003cbr\u003eButtons:\u003cbr\u003e Boot\u003cbr\u003eReset\u003cbr\u003eUser\u003cbr\u003eSparkFun Environmental Combo Breakout - ENS160\/BME280 (Qwiic)\u003c\/p\u003e\n\u003cp\u003e2x Qwiic-Enabled Connectors\u003cbr\u003eInput Voltage Range\u003cbr\u003eTypically 3.3V via Qwiic cable\u003cbr\u003eENS160\u003cbr\u003eI2C Addresses: 0x53 (Default) or 0x52\u003cbr\u003eWide Operating Ranges\u003cbr\u003eVDD: 1.71 1.98V\u003cbr\u003eVDDIO: 1.71V to 3.6V\u003cbr\u003eTemperature: -40°C to +85°C\u003cbr\u003eHumidity: 5% to 95% (non-condensing)\u003cbr\u003eIAQ standard compliance for AQI, eCO2, and TVOC\u003cbr\u003eAir Quality Index - Umweltbundesamt (AQI-UBA)\u003cbr\u003eRange: 1 to 5\u003cbr\u003eResolution: 1\u003cbr\u003eEquivalent Carbon Dioxide (eCO2)\u003cbr\u003eRange: 400 to 65,000 ppm\u003cbr\u003eResolution: 1 ppm\u003cbr\u003eTotal Volatile Organic Compound (TVOC)\u003cbr\u003eRange: 0 to 65,000 ppb\u003cbr\u003eResolution: 1 ppb\u003cbr\u003eImmunity to humidity and ozone\u003cbr\u003eSuperior output stability over the whole temperature and relative humidity operating ranges\u003cbr\u003eEffective ozone compensation\u003cbr\u003eIndependent sensor heater control for highest VOC selectivity and outstanding background discrimination\u003cbr\u003eBME280\u003cbr\u003eVDD: 1.71V to 3.6V\u003cbr\u003eVDDIO: 1.2V to 3.6V\u003cbr\u003eI2C Addresses: 0x77 (Default) or 0x76\u003cbr\u003eTemperature\u003cbr\u003eOperating Range: -40°C to 85°C\u003cbr\u003eFull accuracy to ± 0.5°C from -0°C to 65°C\u003cbr\u003eResolution 0.01°C\u003cbr\u003eHumidity\u003cbr\u003eOperating Range: 0% to 100% RH\u003cbr\u003eAccurate to ±3% from 20% -80% RH\u003cbr\u003eResolution: 0.008%RH\u003cbr\u003ePressure\u003cbr\u003eOperating Range: 30,000 Pa to 110,000Pa\u003cbr\u003eAbsolute Accuracy of ±100Pa\u003cbr\u003eRelative Accuracy of ±12Pa\u003cbr\u003eResolution: 0.18Pa\u003cbr\u003eAltitude Range\u003cbr\u003e0ft to 30,000ft (9.2km)\u003cbr\u003eRelative accuracy of 3.3ft (1m) at sea level, 6.6 (2m) at 30,000ft\u003cbr\u003ePower LED\u003cbr\u003e1.8V AP2127K Voltage Regulator (for ENS160)\u003cbr\u003e2.2kΩ Pull-up Resistors\u003cbr\u003eJumpers\u003cbr\u003ePower LED\u003cbr\u003eI2C Pullup Resistors\u003cbr\u003eSelectable Addresses\u003cbr\u003eENS160: 0x53 (Default) or 0x52\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51613037363502,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/iot-node-lorawan-kit_2.webp?v=1767876397"},{"product_id":"sik-telemetry-radio-v3-915mhz-100mw","title":"SiK Telemetry Radio V3 - 915MHz, 100mW","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SiK Telemetry Radio from Holybro, is a small, lightweight, and inexpensive open source radio platform that can transmit serial data more than 300m out of the box. The radio uses open source SiK firmware. This firmware allows for a simple serial cable replacement to transmit any serial data including telemetry, RTK correction data (RTCM), or simple Serial.print() statements without any configuration required.\u003c\/p\u003e\n\u003cp\u003eThis telemetry kit includes two radio modules, a microB USB cable, microB OTG cable, two JST-GH cables, two right-angled RP-SMA connectors, two 915MHz antennas, and Type-C Adapter. Each radio module in the kit features a transmit power of 100mW, a RX sensitivity of -117dB, a full duplex transparent serial link of 57600baud and are equipped with a microB USB and UART port for easy connectivity.\u003c\/p\u003e\n\u003cp\u003eBoth radios have a microB connector and use the FT230x USB to serial IC making it immensely easy to pass serial data from a remote radio to a base computer or cell phone. Radios are configured using simple AT commands. The provided JST-GH cables make connecting to the TX\/RX pins of the radio a literal snap.\u003c\/p\u003e\n\u003cp\u003eThis radio is plug-n-play for all Pixhawk Standard and other Flight Controllers, providing the easiest ways to setup a telemetry connection between your Autopilot and a ground station. In order to use the Serial Telemetry Radio Kit with a different controller, you may need to cut the one of the provided JST-GH cables in half and tin the ends (for insertion into Arduino headers) or solder the connections to your remote unit (rover, weather station, Arduino, etc). Plug the other module into the USB port on your base station, computer, or cell phone.\u003c\/p\u003e\n\u003cp\u003eA getting started guide is included in the Documents tab to help you set up this radio link for the Pixhawk drone controller but this link can be used for any serial data transmission.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2x Radio Modules with Antennas\u003cbr\u003e1x Micro USB to USB-A cable\u003cbr\u003e1x Micro-USB to Android OTG Adapter Cable\u003cbr\u003e1x Micro USB to Type-C Adapter\u003cbr\u003e1x JST-GH-6P to JST-GH-6P cable (for Pixhawk Standard FC)\u003cbr\u003e1x JST-GH-6P to Molex DF13 6P (for Pix32, Pixhawk 2.4.6, etc.)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e100 mW maximum output power (adjustable) -117 dBm receive sensitivity\u003cbr\u003eOpen-source SiK firmware\u003cbr\u003eRP-SMA connector\u003cbr\u003e2-way full-duplex communication through adaptive TDM UART interface\u003cbr\u003eTransparent serial link\u003cbr\u003eMAVLink protocol framing\u003cbr\u003eFT230X is a USB to BASIC UART IC\u003cbr\u003eInterchangeable air and ground modules 915 or 433MHz (you should purchase the model which is appropriate for your country\/region)\u003cbr\u003eMicro-USB port\u003cbr\u003e6-position JST-GH connector\u003cbr\u003eSupply voltage: 5V DC (from USB or JST-GH)\u003cbr\u003eTransmit current: 100mA at 20dBm\u003cbr\u003eReceive current: 25mA\u003cbr\u003eSerial interface: 3.3V UART\u003cbr\u003eWeight: 23g with antenna\u003c\/p\u003e","brand":"HolyBro","offers":[{"title":"Default Title","offer_id":51617694449966,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/19032-SiK_Telemetry_Radio_V3_-_915MHz__100mW-08.webp?v=1768024173"},{"product_id":"sparkfun-esp8266-thing-starter-kit","title":"SparkFun ESP8266 Thing Starter Kit","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SparkFun ESP8266 Thing Starter Kit is a great place to start learning about the Internet of Things (IoT)! Inside this kit you will find a ESP8266 Thing, a Serial Basic Breakout to program it (and USB cable), jumper wires, breadboard, LEDs, and plenty of headers. We've also included a pair of stackable 10-pin headers as well as 40 regular headers to connect your Serial Basic Breakout to the Thing or breadboard. If you have ever been interested in learning about IoT, Arduino, and wireless solutions, the SparkFun ESP8266 Thing Starter Kit is a perfect place to start!\u003c\/p\u003e\n\u003cp\u003eThe SparkFun ESP8266 Thing is a breakout and development board for the ESP8266 WiFi SoC – a leading platform for Internet of Things (IoT) or WiFi-related projects. The Thing is low-cost and easy to use, and Arduino IDE integration can be achieved in just a few steps. We've made the ESP8266 easy to use by breaking out all of the module’s pins, adding a LiPo charger, power supply, and all of the other supporting circuitry it requires.\u003c\/p\u003e\n\u003cp\u003eWhy the name? We lovingly call it the “Thing” due to it being the perfect foundation for your Internet of Things project. The Thing does everything from turning on an LED to posting data with datastream, and can be programmed just like any microcontroller. You can even program the Thing through the Arduino IDE by installing the ESP8266 Arduino addon.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: You may want to either use a second USB cable to power the board while programming or connect the solder jumper on the back of the board to provide power over the FTDI port.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSparkFun ESP8266 Thing\u003cbr\u003eSparkFun Serial Basic Breakout - CH340G\u003cbr\u003eJumper Wires 4in M\/M (30 pack)\u003cbr\u003eMicroB USB CAble - 6in\u003cbr\u003eBreadboard\u003cbr\u003eStackable Headers - 10 pin x2\u003cbr\u003eLED - Basic Green 5mm\u003cbr\u003eLED - Basic Red 5mm\u003cbr\u003eJumper 2 pin\u003cbr\u003eBreak Away Headers - Straight (40 pins)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll module pins broken out\u003cbr\u003eOn-board LiPo charger\/power supply\u003cbr\u003e802.11 b\/g\/n\u003cbr\u003eWi-Fi Direct (P2P), soft-AP\u003cbr\u003eIntegrated TCP\/IP protocol stack\u003cbr\u003eIntegrated TR switch, balun, LNA, power amplifier and matching network\u003cbr\u003eIntegrated PLLs, regulators, DCXO and power management units\u003cbr\u003eIntegrated low power 32-bit CPU could be used as application processor\u003cbr\u003e+19.5dBm output power in 802.11b mode\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51617809137966,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/15258-SparkFun_ESP8266_Thing_Starter_Kit-06.webp?v=1768029139"},{"product_id":"sparkfun-gps-rtk-dead-reckoning-kit-sma","title":"SparkFun GPS-RTK Dead Reckoning Kit (SMA)","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SparkFun GPS-RTK Dead Reckoning Kit (SMA) gives precisely what you need to get started using u-blox's ZED-F9R and GPS Real Time Kinematics. The SparkFun ZED-F9R GPS Breakout is a high precision, sensor fusion GPS board with equally impressive configuration options and takes advantage of u-blox's Automotive Dead Reckoning (ADR) technology. The ZED-F9R module provides a highly accurate and continuous position by fusing a 3D IMU sensor, wheel ticks, a vehicle dynamics model, correction data, and GNSS measurements.\u003c\/p\u003e\n\u003cp\u003eThe ZED-F9R module is an 184-channel u-blox F9 engine GNSS receiver, meaning it can receive signals from the GPS, GLONASS, Galileo, and BeiDou constellations with ~0.1 meter horizontal position accuracy! That's right, such accuracy can be achieved with an RTK navigation solution when used with a correction source. Note that the ZED-F9R can only operate as a rover, so you will need to connect to a base station. The module supports the concurrent reception of four GNSS systems. The combination of GNSS and integrated 3D sensor measurements on the ZED-F9R provides accurate, real-time positioning rates of up to 30Hz.\u003c\/p\u003e\n\u003cp\u003eThis breakout maximizes position accuracy in dense cities or covered areas compared to other GPS modules. Even under poor signal conditions, continuous positioning is provided in urban environments and available during complete signal loss (e.g., short tunnels and parking garages). The ZED-F9R is the ultimate solution for autonomous robotic applications that require accurate positioning under challenging conditions.\u003c\/p\u003e\n\u003cp\u003eThis u-blox receiver also supports I2C (u-blox calls this Display Data Channel), making it perfect for Qwiic compatibility, so we don't have to use up our precious UART ports. Utilizing our handy Qwiic system, no soldering is required to connect it to the rest of your system. However, we still have broken out 0.1\"-spaced pins if you prefer a breadboard.\u003c\/p\u003e\n\u003cp\u003eU-blox-based GPS products are configurable using the popular but dense Windows program u-center. Many different functions can be configured on the ZED-F9R: baud rates, update rates, geofencing, spoofing detection, external interrupts, SBAS\/D-GPS, etc. All of this can be done within the SparkFun Arduino Library!\u003c\/p\u003e\n\u003cp\u003eThe SparkFun ZED-F9R GPS Breakout also has an onboard rechargeable battery that provides power to the RTC on the ZED-F9R. This reduces the time-to-first fix from a cold start (~26s) to a hot start (~2s). The battery will maintain RTC and GNSS orbit data without being connected to power for plenty of time.\u003c\/p\u003e\n\u003cp\u003eAlso included with this kit is a GNSS multiband antenna and a reversible USB-A to C cable. The antenna features a magnetic base receiving the classic L1 and L2 GPS bands. Meanwhile, the included cables will make sure hooking up each part in the kit is easy!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1x SparkFun GPS-RTK Dead Reckoning Breakout - ZED-F9R, SMA (Qwiic)\u003cbr\u003e1x GNSS Multi-Band Magnetic Mount Antenna - 5m (SMA)\u003cbr\u003e1x Reversible USB A to C Cable - 0.8m\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGPS-RTK Dead Reckoning Breakout - ZED-F9R, SMA:\u003cbr\u003e2x Qwiic Connectors\u003cbr\u003eIntegrated SMA connector for use with antenna of your choice\u003cbr\u003eConcurrent reception of GPS, GLONASS, Galileo and BeiDou\u003cbr\u003e184-Channel GNSS Receiver\u003cbr\u003eReceives both L1C\/A and L2C bands\u003cbr\u003eHorizontal Position Accuracy:\u003cbr\u003e0.01m with RTK\u003cbr\u003eMax Navigation Rate: Up to 30Hz\u003cbr\u003eTime to First Fix\u003cbr\u003eCold: 26s\u003cbr\u003eHot: 2s\u003cbr\u003eOperational Limits\u003cbr\u003eMax G: ≤4G\u003cbr\u003eMax Altitude: 80km (49.7 miles)\u003cbr\u003eMax Velocity: 500m\/s (1118mph)\u003cbr\u003eVelocity Accuracy: 0.05m\/s\u003cbr\u003eHeading Accuracy: 0.2 degrees\u003cbr\u003eBuilt-In Accelerometer and Gyroscope\u003cbr\u003eTime Pulse Accuracy: 30ns\u003cbr\u003eVoltage: 5V or 3.3V but all logic is 3.3V\u003cbr\u003eCurrent: ~85mA to ~130mA (varies with constellations and tracking state)\u003cbr\u003eSoftware Configurable\u003cbr\u003eGeofencing\u003cbr\u003eOdometer\u003cbr\u003eSpoofing Detection\u003cbr\u003eExternal Interrupt\u003cbr\u003ePin Control\u003cbr\u003eLow Power Mode\u003cbr\u003eMany others!\u003cbr\u003eSupports NMEA, UBX, and RTCM protocols over UART or I2C interfaces\u003cbr\u003eDimensions: 43.18mm x 50.8mm (1.7in x 2.0in)\u003cbr\u003eWeight: 12.1g\u003cbr\u003eAntenna:\u003cbr\u003eFrequency:\u003cbr\u003eL1 Band: 1559-1606MHz\u003cbr\u003eL2\/L5 Band: 1197-1249MHz\u003cbr\u003ePeak gain (over 15cm diameter ground plane):\u003cbr\u003eL1 Band: 3.5dBic\u003cbr\u003eL2\/L5 Band: 0-2.0dBic\u003cbr\u003eVSWR: max. 2\u003cbr\u003eBandwidth: min. 200MHz\u003cbr\u003eImpedance: 50 Ohm\u003cbr\u003ePolarization RHCP\u003cbr\u003eSupports GPS, GLONASS, Galileo, and BeiDou\u003cbr\u003e5m coaxial cable with SMA connector\u003cbr\u003eMagnetic base, fixed installation option (screw mount, 2 x M4 screws)\u003cbr\u003eDimensions: 60.0mm x 82.0mm x 22.5mm\u003cbr\u003eWeight: 175g (including cable)\u003cbr\u003eUSB Cable:\u003cbr\u003eReversible USB-A connector\u003cbr\u003eReversible USB-C connector\u003cbr\u003e0.8 meter cable length\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51620156309806,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/23452-GPS-RTK-Dead-Reckoning-Kit-Feature.webp?v=1768124764"},{"product_id":"raspberry-pi-5-essential-kit-8gb","title":"Raspberry Pi 5 Essential Kit - 8GB","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Raspberry Pi 5 comes with some layout and power requirement changes. For those upgrading an existing project to the Raspberry Pi 5, this kit includes the parts that you'll need to update. The 5 is a lot more power hungry, so included is the new 27W Type-C PD Wall Adapter (North American Plug). In more than just a new configuration; the new official case also includes a fan, a previously sold-separately component. The new case also features the ability to mount HATs to the Pi 5 while keeping it protected.\u003c\/p\u003e\n\u003cp\u003eThese two components are included in this kit with an 8GB model of the new Raspberry Pi 5.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1x Raspberry Pi 5 - 8GB\u003cbr\u003e1x Raspberry Pi 27W USB-C PD Power Supply - White\u003cbr\u003e1x Raspberry Pi 5 Case - Red\/White\u003c\/p\u003e","brand":"Raspberry Pi","offers":[{"title":"Default Title","offer_id":51620156375342,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/23782-Raspberry-Pi-5-8G-essential-kit.webp?v=1768124941"},{"product_id":"raspberry-pi-5-essential-kit-4gb","title":"Raspberry Pi 5 Essential Kit - 4GB","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Raspberry Pi 5 comes with some layout and power requirement changes. For those upgrading an existing project to the Raspberry Pi 5, this kit includes the parts that you'll need to update. The 5 is a lot more power hungry, so included is the new 27W Type-C PD Wall Adapter (North American Plug). In more than just a new configuration; the new official case also includes a fan, a previously sold-separately component. The new case also features the ability to mount HATs to the Pi 5 while keeping it protected.\u003c\/p\u003e\n\u003cp\u003eThese two components are included in this kit with an 4GB model of the new Raspberry Pi 5.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1x Raspberry Pi 5 - 4GB\u003cbr\u003e1x Raspberry Pi 27W USB-C PD Power Supply - White\u003cbr\u003e1x Raspberry Pi 5 Case - Red\/White\u003c\/p\u003e","brand":"Raspberry Pi","offers":[{"title":"Default Title","offer_id":51620156440878,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/23781-Raspberry-Pi-5-4G-essential-kit.webp?v=1768125038"},{"product_id":"raspberry-pi-5-basic-kit-8gb-1","title":"Raspberry Pi 5 Basic Kit - 8GB","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA basic kit for getting started with the Raspberry Pi 5. Included in the kit is a new power supply that meets the power needs for the 5. It also includes our choice for a microSD card for use with the Pi line that meets the specs set by the Raspberry Pi Foundation and has fantastic read\/write speeds. In addition a MicroHDMI cable is included for interfacing an HDMI display with the Pi 5 and We've also thrown in our Qwiic Shim for Raspberry Pi, the quickest way to use I2C devices with the Raspberry Pi. And of course a Raspberry Pi 5 Board with 8GB of RAM.\u003c\/p\u003e\n\u003cp\u003eThe Raspberry Pi 5 is next iteration of the Raspberry Pi single board computer featuring a 64-bit quad-core Arm Cortex-A76 processor running at 2.4GHz, Raspberry Pi 5 delivers a 2–3× increase in CPU performance relative to Raspberry Pi 4. Alongside a substantial uplift in graphics performance from an 800MHz VideoCore VII GPU; dual 4Kp60 display output over HDMI; and state-of-the-art camera support from a rearchitected Raspberry Pi Image Signal Processor, it provides a smooth desktop experience for consumers, and opens the door to new applications for industrial customers.\u003c\/p\u003e\n\u003cp\u003eFor the first time, this is a full-size Raspberry Pi computer using silicon built in-house at Raspberry Pi. The RP1 “southbridge” provides the bulk of the I\/O capabilities for Raspberry Pi 5, and delivers a step change in peripheral performance and functionality. Aggregate USB bandwidth is more than doubled, yielding faster transfer speeds to external UAS drives and other high-speed peripherals; the dedicated two-lane 1Gbps MIPI camera and display interfaces present on earlier models have been replaced by a pair of four-lane 1.5Gbps MIPI transceivers, tripling total bandwidth, and supporting any combination of up to two cameras or displays; peak SD card performance is doubled, through support for the SDR104 high-speed mode; and for the first time the platform exposes a single-lane PCI Express 2.0 interface, providing support for high-bandwidth peripherals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1x Raspberry Pi 5 - 8GB\u003cbr\u003e1x 27W USB C PD Wall Adapter (North American Plug)\u003cbr\u003e1x MicroHDMI to HDMI Cable - 3 Ft.\u003cbr\u003e1x 64GB MicroSD Card (MicroXC and meets SDR104 standards)\u003cbr\u003e1x SparkFun Qwiic SHIM for Raspberry Pi\u003c\/p\u003e","brand":"Raspberry Pi","offers":[{"title":"Default Title","offer_id":51620158439726,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/23617_Raspberry_Pi_5_Kit-Black-Power-Source.webp?v=1768125172"},{"product_id":"raspberry-pi-5-basic-kit-4gb-1","title":"Raspberry Pi 5 Basic Kit - 4GB","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA basic kit for getting started with the Raspberry Pi 5. Included in the kit is a new power supply that meets the power needs for the 5. It also includes our choice for a microSD card for use with the Pi line that meets the specs set by the Raspberry Pi Foundation and has fantastic read\/write speeds. In addition a MicroHDMI cable is included for interfacing an HDMI display with the Pi 5 and We've also thrown in our Qwiic Shim for Raspberry Pi, the quickest way to use I2C devices with the Raspberry Pi. And of course a Raspberry Pi 5 Board with 4GB of RAM.\u003c\/p\u003e\n\u003cp\u003eThe Raspberry Pi 5 is next iteration of the Raspberry Pi single board computer featuring a 64-bit quad-core Arm Cortex-A76 processor running at 2.4GHz, Raspberry Pi 5 delivers a 2–3× increase in CPU performance relative to Raspberry Pi 4. Alongside a substantial uplift in graphics performance from an 800MHz VideoCore VII GPU; dual 4Kp60 display output over HDMI; and state-of-the-art camera support from a rearchitected Raspberry Pi Image Signal Processor, it provides a smooth desktop experience for consumers, and opens the door to new applications for industrial customers.\u003c\/p\u003e\n\u003cp\u003eFor the first time, this is a full-size Raspberry Pi computer using silicon built in-house at Raspberry Pi. The RP1 “southbridge” provides the bulk of the I\/O capabilities for Raspberry Pi 5, and delivers a step change in peripheral performance and functionality. Aggregate USB bandwidth is more than doubled, yielding faster transfer speeds to external UAS drives and other high-speed peripherals; the dedicated two-lane 1Gbps MIPI camera and display interfaces present on earlier models have been replaced by a pair of four-lane 1.5Gbps MIPI transceivers, tripling total bandwidth, and supporting any combination of up to two cameras or displays; peak SD card performance is doubled, through support for the SDR104 high-speed mode; and for the first time the platform exposes a single-lane PCI Express 2.0 interface, providing support for high-bandwidth peripherals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1x Raspberry Pi 5 - 4GB\u003cbr\u003e1x 27W USB C PD Wall Adapter (North American Plug)\u003cbr\u003e1x MicroHDMI to HDMI Cable - 3 Ft.\u003cbr\u003e1x 64GB MicroSD Card (MicroXC and meets SDR104 standards)\u003cbr\u003e1x SparkFun Qwiic SHIM for Raspberry Pi\u003c\/p\u003e","brand":"Raspberry Pi","offers":[{"title":"Default Title","offer_id":51620159095086,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/23626_Raspberry_Pi_5_Kit-Black-Power-Source.webp?v=1768125260"},{"product_id":"sparkfun-raspberry-pi-zero-2-w-basic-kit","title":"SparkFun Raspberry Pi Zero 2 W Basic Kit","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Raspberry Pi Zero 2 W can be a bit tricky to set up with its unique power and cable requirements. That's where this kit comes in. The SparkFun Raspberry Pi Zero 2 W Basic Kit provides you with everything you need to get started with this successive Pi, all without breaking the bank.\u003c\/p\u003e\n\u003cp\u003eThe Raspberry Pi Zero 2 W is still the Pi you know and love but at a largely reduced size of only 65mm long by 30mm wide and at a very economical price. With the addition of WiFi and Bluetooth(R), the Raspberry Pi Zero 2 W is ideal for making embedded Internet of Things (IoT) projects. The Pi Zero 2 W has been designed to be as flexible and compact as possible with mini connectors and an unpopulated 40-pin GPIO allowing you to use only what your project requires.\u003c\/p\u003e\n\u003cp\u003eInside each kit you will find a Raspberry Pi Zero 2 W, a 64GB MicroSD card with 170MB\/s read speeds and 70MB\/s write speeds, Mini HDMI to HDMI and USB OTG cables, and a Raspberry Pi 12.5W Micro-USB Power Adapter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRaspberry Pi Zero 2 W\u003cbr\u003eRaspberry Pi 12.5W Micro-USB Power Adapter (US)\u003cbr\u003eMini HDMI Cable -- 3'\u003cbr\u003eUSB OTG Cable -- Female A to Micro B -- 5\"\u003cbr\u003eKingston Canvas Go! Plus 64GB MicroSD Card with Adapter\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51620159324462,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/RPIKit_1.webp?v=1768125351"},{"product_id":"sparkfun-raspberry-pi-zero-w-basic-kit","title":"SparkFun Raspberry Pi Zero W Basic Kit","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Raspberry Pi Zero W can be a bit tricky to set up with its unique power and cable requirements. That's where this kit comes in. The SparkFun Raspberry Pi Zero W Basic Kit provides you with everything you need to get started with this miniaturized Pi, all without breaking the bank.\u003c\/p\u003e\n\u003cp\u003eThe Raspberry Pi Zero W is still the Pi you know and love but at a largely reduced size of only 65mm long by 30mm wide and at a very economical price. With the addition of wireless LAN and Bluetooth(R), the Raspberry Pi Zero W is ideal for making embedded Internet of Things (IoT) projects. The Pi Zero W has been designed to be as flexible and compact as possible with mini connectors and an unpopulated 40-pin GPIO allowing you to use only what your project requires.\u003c\/p\u003e\n\u003cp\u003eInside each kit you will find a Raspberry Pi Zero W, a 64GB MicroSD Card that meets performance metrics set by the Raspberry Pi Foundation, Mini HDMI and USB OTG cables, and a high-quality wall adapter. This kit provides everything you need to get started with the Pi Zero W.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1x Raspberry Pi Zero W\u003cbr\u003e1x 64 GB MicroSD Card\u003cbr\u003e1x Mini HDMI Cable -- 3'\u003cbr\u003e1x USB OTG Cable -- Female A to Micro B -- 5\"\u003cbr\u003e1x Wall Adapter Power Supply -- 5.1VDC 2.5A (USB Micro-B)\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51620171383086,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/23091-_KIT-_01.webp?v=1768129756"},{"product_id":"sparkfun-raspberry-pi-4-basic-kit-8gb","title":"SparkFun Raspberry Pi 4 Basic Kit - 8GB","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Raspberry Pi 4 Basic Kit includes everything you'll need to get up and running with the new Raspberry Pi 4 8GB. The Pi 4 moves to a MicroHDMI Connector for monitors and a USB Type C connector for powering the board. Inside the kit you will find a MicroHDMI to HDMI cable and the Raspberry Pi wall adapter; two things needed to run the Pi, but that you probably didn't have sitting around already. The wall adapter provides 15.3W of power, enough to properly power the Pi and most projects.\u003c\/p\u003e\n\u003cp\u003eFrom our previous kits, we've bumped the MicroSD card capacity up to 64GB as the Pi 4 is able to support more memory hungry projects. The card comes blank with no distribution allowing you to choose from a multitude of operating systems or projects that are built specifically for the Pi. The SD card adapter bundled with the MicroSD card makes it simple to upload the operating system of your choice using the SD card reader in most modern PCs and Laptops.\u003c\/p\u003e\n\u003cp\u003eWe've also thrown in our Qwiic Shim for Raspberry Pi, the quickest way to use I2C devices with the Raspberry Pi. If you're familiar with the Raspberry Pi environment and are looking to upgrade to the Pi 4, this is the kit for you! We recommend also picking up one of the Heat Sink Cases in the Hookup Accessories section below should your project be especially power hungry, such as running multiple displays at once.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRaspberry Pi 4 Model B (8 GB)\u003cbr\u003eRaspberry Pi Wall Adapter Power Supply - 5.1VDC, 3.0A, 15.3W (USB-C)\u003cbr\u003eMicro HDMI Cable - 3ft\u003cbr\u003eMicroSD Card with Adapter - 64GB (Class 10)\u003cbr\u003eSparkFun Qwiic SHIM for Raspberry Pi\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51620172103982,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/17980-SparkFun_Raspberry_Pi_4_Basic_Kit_-_8GB-01.webp?v=1768129852"},{"product_id":"sparkfun-raspberry-pi-4-desktop-kit-without-raspberry-pi","title":"SparkFun Raspberry Pi 4 Desktop Kit - Without Raspberry Pi","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDo you have a Raspberry Pi 4 laying around or got one as a gift and would like to use it? This is the kit for you. Everything you would find in the regular kits but without a Raspberry Pi 4. Bring your own Pi 4!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe SparkFun Raspberry Pi 4 Desktop Kit includes everything you need to turn any monitor with an HDMI port into a desktop PC. If you're looking to create a PC or Media Center with the Raspberry Pi 4, this is the kit for you. All the components were chosen and tested to create the highest quality, least frustrating experience that allows the Pi to work to its full potential.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eA 64GB memory card card provides capacity and top of the line read\/write speeds needed to run most operating systems for the Raspberry Pi platform smoothly. The included card brings updates to the Raspian image 10x faster when compared to our previous card! This card also passes the Raspberry Pi SD Card Speed Test and comes blank with no distribution allowing you to choose from a multitude of operating systems or projects that are built specifically for the Pi. The USB Type C wall adapter and Type C to Type C USB cable provide a modular power system for the Raspberry Pi 4. The heat sink case provides protection for the Raspberry Pi board but also cools the major components allowing it to run smoothly during heavy usage. The Logitech K400 Plus wireless keyboard provides a plug and play HID solution for the system. The included an HDMI to Micro HDMI cable can interface to any HDMI monitor. Finally, we added our Qwiic Shim, which allows you to easily attach any of our Qwiic Boards for testing.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThis variation of the Raspberry Pi 4 Desktop Kit does not include a Raspberry Pi in any form. This will need to be purchased separately.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eNOTE\u003c\/strong\u003e: The Qwiic Shim is not intended to be used with the Heatsink case, as it prevents the case from properly connecting with the processor. The top of the case needs to be off should you use the Shim or utilize an extension header in conjunction with a Pi Hat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLogitech K400 Plus Wireless Keyboard with Touchpad\u003cbr\u003eKingston Canvas Go! Plus 64GB MicroSD Card with Adapter\u003cbr\u003eUSB Type C to Type C Male Cable (1 Meter)\u003cbr\u003eUSB Type C Wall Adapter\u003cbr\u003eMetal Heatsink Case with Thermal Tape - Black\u003cbr\u003eHDMI to Micro HDMI Cable\u003cbr\u003eSparkFun Qwiic SHIM for Raspberry Pi\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51620173480238,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/17727-SparkFun_Raspberry_Pi_4_Desktop_Kit_-_Without_Raspberry_Pi-01.webp?v=1768129948"},{"product_id":"sparkfun-raspberry-pi-4-hardware-starter-kit-without-raspberry-pi","title":"SparkFun Raspberry Pi 4 Hardware Starter Kit - Without Raspberry Pi","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDo you have a Raspberry Pi 4 laying around or got one as a gift and would like to use it? This is the kit for you. Everything you would find in the regular kits but without a Raspberry Pi 4. Bring your own Pi 4!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe Raspberry Pi 4 Hardware Starter Kit provides a solid set of parts and instruction for working with the Raspberry Pi 4 in a more hardware-centric manner. While the Raspberry Pi isn't typically considered a go-to for hardware projects, its I\/O pins hold a lot of benefits that you can use for a variety of applications. This kit covers the basics like using LEDs, and Buttons while providing a solid set of parts for working with any other hardware I\/O and the 40-pin header. In addition, we've included all the parts needed for getting the Raspberry Pi 4 up and running whether it's on its own, or using a monitor (not included). The new 64GB MicroSD cards keep read\/write commands running super fast, too.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eMost of the contents of the kit rely on the use of the 2x20, 40-pin header, so we've included a special extender to allow you to plug in the ribbon cable while using the provided heatsink case. We've also included a Qwiic Shim for easily working with I2C based Qwiic boards with the Pi. No soldering is required for this kit!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: This variation of the Raspberry Pi 4 Hardware Starter Kit does not include a Raspberry Pi in any form. This will need to be purchased separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUSB C Wall Adapter - 5.1V, 3A (Black)\u003cbr\u003eUSB Type C to Type C Cable - 1 Meter, 100W, USB 2.0\u003cbr\u003eAluminum Heatsink Case for Raspberry Pi 4 - Obsidian Black\u003cbr\u003eSparkFun Qwiic SHIM for Raspberry Pi\u003cbr\u003eMicro HDMI Cable - 3ft\u003cbr\u003eKingston Canvas Go! Plus 64GB MicroSD Card with Adapter\u003cbr\u003e2 X 20 Pin Extended GPIO Header - 16mm\/7.30mm\u003cbr\u003eJumper Wires Premium 6\" M\/F --- 10 Pack\u003cbr\u003eJumper Wires Standard 7\" M\/M --- 30 Pack\u003cbr\u003eSparkFun USB Mini-B Cable --- 6 Foot\u003cbr\u003eRaspberry Pi GPIO Ribbon Cable --- 40-pin, 6\"\u003cbr\u003eResistor 330 Ohm 1\/6 Watt PTH --- 20 pack\u003cbr\u003eAssorted LED (20 pack)\u003cbr\u003eMulticolor Buttons (4 pack)\u003cbr\u003eBreadboard --- Full-Size (Bare)\u003cbr\u003eSparkFun FTDI Basic Breakout --- 3.3V\u003cbr\u003eSparkFun Pi Wedge\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51620173545774,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/17726-SparkFun_Raspberry_Pi_4_Hardware_Starter_Kit_-_Without_Raspberry_Pi-01.webp?v=1768130053"},{"product_id":"sparkfun-raspberry-pi-4-hardware-starter-kit-4gb","title":"SparkFun Raspberry Pi 4 Hardware Starter Kit - 4GB","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Raspberry Pi 4 Hardware Starter Kit provides a solid set of parts and instruction for working with the Raspberry Pi 4 in a more hardware-centric manner. While the Raspberry Pi isn't typically considered a go-to for hardware projects, its I\/O pins hold a lot of benefits that you can use for a variety of applications. This kit covers the basics like using LEDs, and Buttons while providing a solid set of parts for working with any other hardware I\/O and the 40-pin header. In addition, we've included all the parts needed for getting the Raspberry Pi 4 up and running whether it's on its own, or using a monitor (not included). The new 64GB MicroSD cards keep read\/write commands running super fast, too.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eMost of the contents of the kit rely on the use of the 2x20, 40-pin header, so we've included a special extender to allow you to plug in the ribbon cable while using the provided heatsink case. We've also included a Qwiic Shim for easily working with I2C based Qwiic boards with the Pi. No soldering is required for this kit!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This variation includes the 4GB RAM option for the Raspberry Pi 4.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRaspberry Pi 4 Model B (4GB)\u003cbr\u003eUSB C Wall Adapter - 5.1V, 3A (Black)\u003cbr\u003eUSB Type C to Type C Cable - 1 Meter, 100W, USB 2.0\u003cbr\u003eAluminum Heatsink Case for Raspberry Pi 4 - Obsidian Black\u003cbr\u003eSparkFun Qwiic SHIM for Raspberry Pi\u003cbr\u003eMicro HDMI Cable - 3ft\u003cbr\u003eKingston Canvas Go! Plus 64GB MicroSD Card with Adapter\u003cbr\u003e2 X 20 Pin Extended GPIO Header - 16mm\/7.30mm\u003cbr\u003eJumper Wires Premium 6\" M\/F --- 10 Pack\u003cbr\u003eJumper Wires Standard 7\" M\/M --- 30 Pack\u003cbr\u003eSparkFun USB Mini-B Cable --- 6 Foot\u003cbr\u003eRaspberry Pi GPIO Ribbon Cable --- 40-pin, 6\"\u003cbr\u003eResistor 330 Ohm 1\/6 Watt PTH --- 20 pack\u003cbr\u003eAssorted LED (20 pack)\u003cbr\u003eMulticolor Buttons (4 pack)\u003cbr\u003eBreadboard --- Full-Size (Bare)\u003cbr\u003eSparkFun FTDI Basic Breakout --- 3.3V\u003cbr\u003eSparkFun Pi Wedge\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51620173611310,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/16388-Raspberry_Pi_4_Hardware_Starter_Kit_-_4GB-01.webp?v=1768130128"},{"product_id":"sparkfun-raspberry-pi-4-basic-kit-2gb","title":"SparkFun Raspberry Pi 4 Basic Kit - 2GB","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Raspberry Pi 4 Basic Kit includes everything you'll need to get up and running with the Raspberry Pi 4 2GB. The Pi 4 moves to a MicroHDMI Connector for monitors and a USB Type C connector for powering the board. Inside the kit you will find a MicroHDMI to HDMI cable and USB Type C Wall Adapter; two things needed to run the Pi, but that you probably didn't have sitting around already. The wall adapter provides 15.3W of power, enough to properly power the Pi and most projects.\u003c\/p\u003e\n\u003cp\u003eFrom our previous kits, we've bumped the MicroSD card capacity up to 64GB as the Pi 4 is able to support more memory hungry projects. The card comes blank with no distribution allowing you to choose from a multitude of operating systems or projects that are built specifically for the Pi. The SD card adapter bundled with the MicroSD card makes it simple to upload the operating system of your choice using the SD card reader in most modern PCs and Laptops.\u003c\/p\u003e\n\u003cp\u003eWe've also thrown in our Qwiic Shim for Raspberry Pi, the quickest way to use I2C devices with the Raspberry Pi. If you're familiar with the Raspberry Pi environment and are looking to upgrade to the Pi 4, this is the kit for you! We recommend also picking up one of the Heat Sink Cases in the Hookup Accessories section below should your project be especially power hungry, such as running multiple displays at once.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRaspberry Pi 4 Model B (2 GB)\u003cbr\u003eRaspberry Pi Wall Adapter Power Supply - 5.1VDC, 3.0A, 15.3W (USB-C)\u003cbr\u003eMicro HDMI Cable - 3ft\u003cbr\u003eMicroSD Card with Adapter - 64GB (Class 10)\u003cbr\u003eSparkFun Qwiic SHIM for Raspberry Pi\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51620173807918,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/16383-SparkFun_Raspberry_Pi_4_Basic_Kit_-_2GB-01a.webp?v=1768130226"},{"product_id":"sparkfun-xbee-3-wireless-kit","title":"SparkFun XBee 3 Wireless Kit","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the SparkFun XBee Wireless Kit, the perfect box full of goodies to get you started using XBees. Inside this kit you will find two XBee Modules, one XBee Explorer, one Xbee Shield and a set of R3 headers to solder onto the shield. Our entire goal for the XBee Kit was to make wireless communication simple. Connect one XBee to the shield and your Arduino, connect the other XBee to the Explorer board and your computer, and you'll be able to seamlessly pass serial data to and from your Arduino wirelessly! Using this connection, you can transmit remote sensor data, or send data from your computer to update a scoreboard, or drive a robot from your keyboard!\u003c\/p\u003e\n\u003cp\u003eThe XBee Shield mates directly with an Arduino Pro or USB board, and equips it with wireless communication capabilities using the popular XBee module. This is SparkFun's own design and is a distant relative to the official XBee Shield from Arduino.\u003c\/p\u003e\n\u003cp\u003eThe serial pins (DIN and DOUT) of the XBee are connected through an SPDT switch, which allows you to select a connection to either the UART pins (D0, D1) or any digital pins on the Arduino (D2 and D3 default). Power is taken from the 5V pin of the Arduino and regulated on-board to 3.3VDC before being supplied to the XBee. The shield also takes care of level shifting on the DIN pin of the XBee.\u003c\/p\u003e\n\u003cp\u003eThe board also includes LEDs to indicate power and activity on DIN, DOUT, RSSI, and DIO5 pins of the XBee. The Arduino's reset button is brought out on the shield, and a 12x11 grid of 0.1\" holes are available for prototyping.\u003c\/p\u003e\n\u003cp\u003eNote: If you are using these outside of the United States, please check with your local laws regarding radio communication.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1x XBee Shield\u003cbr\u003e1x XBee Explorer USB\u003cbr\u003e2x XBee Modules\u003cbr\u003e1x Arduino Stackable Header Kit - R3\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKit allows for simple serial cable replacement\u003cbr\u003eModules support data rates up to 115200bps\u003cbr\u003eDIN and DOUT pins of XBee can be connected to either the UART pins or any digital pin on the Arduino (D2 and D3 default)\u003cbr\u003e3.3V power regulation and level shifting on-board\u003cbr\u003e12 x 11 grid of 0.1\" spaced prototyping holes\u003cbr\u003eReset button\u003cbr\u003ePower, DIN, DOUT, RSSI and DIO5 indicator LEDs\u003cbr\u003eArduino R3 Footprint\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51620173906222,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/15936-SparkFun_XBee_3_Wireless_Kit-02.webp?v=1768130328"},{"product_id":"sparkfun-wireless-joystick-kit","title":"SparkFun Wireless Joystick Kit","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SparkFun Wireless Joystick Kit provides an easy way to control your next XBee project. Before the wireless joystick, radio-controlled projects used hobby RC transmitters, the same ones used for RC cars, boats and planes. The problem with these transmitters is that many aren’t customizable, and the ones that are tend to be too expensive for many of us. The Wireless Joystick Kit offers a custom wireless solution for those who want to control their project their own way.\u003c\/p\u003e\n\u003cp\u003eEquipped with the increasingly popular SAMD21 onboard, all you need is to assemble the SparkFun Wireless Joystick into the configuration you want and add your own XBee and lithium ion battery into the provided sockets. The Wireless Joystick Kit can be assembled into a configuration that utilizes dual joysticks for better RC steering robots (like tanks) or a single joystick configuration with four 12mm momentary pushbuttons (a setup similar to what older game consoles used). We have provided a full Hookup Guide that gives assembly instructions, as well as a tank-steering motor controller tutorial to help get you started!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: This kit will need to be assembled before use, so a beginner's knowledge of soldering will be required. Additionally, in an effort to keep shipping rates down and make this kit available to people throughout the world without delay, there is no XBee or lithium ion battery included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1x Wireless Joystick Board\u003cbr\u003e2x Right Angle Tactile Button\u003cbr\u003e2x Thumb Joysticks\u003cbr\u003e4x Momentary Pushbutton Switch - 12mm\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51620174364974,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/14051-02.webp?v=1768130425"},{"product_id":"multimedia-wireless-keyboard","title":"Multimedia Wireless Keyboard","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith Single-Board Computers (SBCs) on the rise, it is a good idea to have an easy way to interface with them. Operating on a 2.4GHz frequency, the Multimedia Wireless Keyboard possesses a normal-sized key layout, media controls and a multitouch track pad. This keyboard is powered by a built-in 850mAh LiPo battery, providing you with 500--700 hours of use. Even if you don't have a Raspberry Pi, BeagleBone or another SBC, this keyboard can work with smart TVs, mobile devices and full-blown PCs!\u003c\/p\u003e\n\u003cp\u003eThe Multimedia Wireless Keyboard can be charged via the attached USB cable, which stores in the same compartment as the wireless USB receiver. The track pad on the wireless keyboard not only features left and right click options, but also a scroll function. Measuring less than an inch thick, this wireless keyboard is an ideal product for on-the-go situations.\u003c\/p\u003e\n\u003cp\u003eNote: The attached USB cable is for charging purposes only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003cbr\u003eWireless Keyboard\u003cbr\u003eWireless USB Receiver\u003cbr\u003eUSB Extension Cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Specs\u003c\/strong\u003e\u003cbr\u003e317.2mm x 123.6mm x 18.3mm (12.4in x 4.8in x 0.7in)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSystem Requirements:\u003cbr\u003e\u003c\/strong\u003eHID-Compatible Device\u003cbr\u003eUSB Port\u003cbr\u003eWindows 2000, XP, CE, Vista, 7, 8 or Higher\u003cbr\u003eLinux (Debian-3.1, Red Hat-9.0, Ubuntu-8.10, Fedora-7.0)\u003cbr\u003eAndroid OS\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51620174561582,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/14271-06.webp?v=1768130537"},{"product_id":"sparkfun-openlog-data-collector-with-machinechat-air-quality-monitoring","title":"SparkFun OpenLog Data Collector with Machinechat - Air Quality Monitoring","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Air Quality Monitoring version of the SparkFun OpenLog Data Collector Kit with Machinechat is an easy way to organize and display your data from an included SGP40 Qwiic Air Quality Sensor with the OpenLog Artemis and JEDI One. The SparkFun OpenLog Artemis (without IMU) is an open source data logger that comes preprogrammed to automatically log GPS \/ GNSS, serial data, and various pressure, humidity, and distance data as well as the ability to expand out to any number of our Qwiic sensors. This makes it ideal for data collection, and to display that data, Machinechat's JEDI One will be your best friend!\u003c\/p\u003e\n\u003cp\u003eMachinechat's JEDI One provides an easy-to-use, customizable, one stop dashboard solution for IoT data collection, transformation, visualization, and reporting. Built-in HTTP and TCP servers allow you to start collecting data from sensors and devices in minutes, and custom plug-ins allow you to collect data from virtually any sensor or device. In addition, a fully integrated and self-contained MQTT broker makes it easy to integrate any MQTT based device or sensor. No need to set up a separate broker or use Azure or AWS for MQTT. Just configure and go!\u003c\/p\u003e\n\u003cp\u003eThe SparkFun SGP40 Air Quality Sensor provides a measurement of the quality of the air in your room or house. The SGP40 is based on Sensirion's CMOSens® technology and uses a metal oxide (MOx) sensor with a temperature controlled micro hotplate and provides a humidity-compensated volatile organic compound (VOC) based indoor air quality signal. Both the sensing element and VOC Algorithm feature an unmatched robustness against contaminating gases present in real world applications enabling a unique long term stability as well as low drift and device to device variation.\u003c\/p\u003e\n\u003cp\u003eSimply connect the BME280 Breakout of another compatible Qwiic-enabled device, power up the OpenLog Artemis, and all incoming serial data is automatically recorded to a log file with baud rates up to 500000bps, supported! The OLA also has four ADC channels available on the edge of the board. Voltages up to 2V can be logged with 14-bit precision up to 1900Hz for one channel and 1000Hz logging all four channels. Additionally, based on feedback from users we've added an on-board RTC so that all data can be time stamped.\u003c\/p\u003e\n\u003cp\u003eThe OpenLog Artemis is highly configurable over an easy to use serial interface. Simply plug in a USB-C cable and open a terminal at 115200bps. The logging output is automatically streamed to both the terminal and the microSD. Pressing any key will open the configuration menu.\u003c\/p\u003e\n\u003cp\u003eIncluded in this kit, you will find an OpenLog Artemis (without IMU), an SGP40 Qwiic Atmospheric Sensor Breakout, a unique JEDI One license, and connector cables. Additional sensors must be purchased separately. If you are interested in picking up a different version of this kit, be sure to check out the Base Kit or Environmental Monitoring Kit, instead!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The version of OpenLog Artemis included in this kit has the ICM-20948 IMU sensor removed. This IC is becoming increasingly difficult to locate. This version still supports auto-detection and logging of over a dozen sensors and GNSS receivers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1x SparkFun OpenLog Artemis (without IMU)\u003cbr\u003e1x SparkFun Air Quality Sensor - SGP40 (Qwiic)\u003cbr\u003e1x Machinechat Software License Card - JEDI One\u003cbr\u003e1x SparkFun Qwiic Cable Kit\u003cbr\u003e1x Reversible USB A to C Cable - 0.8m\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51620175216942,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/KIT-20684_SparkFun___Machinechat_Qwiic_loT-_01.webp?v=1768130829"},{"product_id":"sparkfun-openlog-data-collector-with-machinechat-environmental-monitoring","title":"SparkFun OpenLog Data Collector with Machinechat - Environmental Monitoring","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Environmental Monitoring version of the SparkFun OpenLog Data Collector Kit with Machinechat is an easy way to organize and display your data from an included BME280 Qwiic Atmospheric Sensor with the OpenLog Artemis and JEDI One. The SparkFun OpenLog Artemis (without IMU) is an open source data logger that comes preprogrammed to automatically log GPS \/ GNSS, serial data, and various pressure, humidity, and distance data as well as the ability to expand out to any number of our Qwiic sensors. This makes it ideal for data collection, and to display that data, Machinechat's JEDI One will be your best friend!\u003c\/p\u003e\n\u003cp\u003eMachinechat's JEDI One provides an easy-to-use, customizable, one stop dashboard solution for IoT data collection, transformation, visualization, and reporting. Built-in HTTP and TCP servers allow you to start collecting data from sensors and devices in minutes, and custom plug-ins allow you to collect data from virtually any sensor or device. In addition, a fully integrated and self-contained MQTT broker makes it easy to integrate any MQTT based device or sensor. No need to set up a separate broker or use Azure or AWS for MQTT. Just configure and go!\u003c\/p\u003e\n\u003cp\u003eThe SparkFun BME280 Atmospheric Sensor Breakout is an easy way to measure barometric pressure, humidity, and temperature readings, all without taking up too much space. Basically, you can find out anything you need to know about atmospheric conditions from this tiny breakout. The BME280 Breakout has been designed to be used in indoor\/outdoor navigation, weather forecasting, home automation, and even personal health and wellness monitoring.\u003c\/p\u003e\n\u003cp\u003eSimply connect the BME280 Breakout of another compatible Qwiic-enabled device, power up the OpenLog Artemis, and all incoming serial data is automatically recorded to a log file with baud rates up to 500000bps, supported! The OLA also has four ADC channels available on the edge of the board. Voltages up to 2V can be logged with 14-bit precision up to 1900Hz for one channel and 1000Hz logging all four channels. Additionally, based on feedback from users we've added an on-board RTC so that all data can be time stamped.\u003c\/p\u003e\n\u003cp\u003eThe OpenLog Artemis is highly configurable over an easy to use serial interface. Simply plug in a USB-C cable and open a terminal at 115200bps. The logging output is automatically streamed to both the terminal and the microSD. Pressing any key will open the configuration menu.\u003c\/p\u003e\n\u003cp\u003eIncluded in this kit, you will find an OpenLog Artemis (without IMU), a BME280 Qwiic Atmospheric Sensor Breakout, a unique JEDI One license, and connector cables. Additional sensors must be purchased separately. If you are interested in picking up a different version of this kit, be sure to check out the Base Kit or Air Quality Monitoring Kit, instead!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: The version of OpenLog Artemis included in this kit has the ICM-20948 IMU sensor removed. This IC is becoming increasingly difficult to locate. This version still supports auto-detection and logging of over a dozen sensors and GNSS receivers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1x SparkFun OpenLog Artemis (without IMU)\u003cbr\u003e1x SparkFun Atmospheric Sensor Breakout - BME280 (Qwiic)\u003cbr\u003e1x Machinechat Software License Card - JEDI One\u003cbr\u003e1x SparkFun Qwiic Cable Kit\u003cbr\u003e1x Reversible USB A to C Cable - 0.8m\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51620175446318,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/KIT-20683_SparkFun___Machinechat_Qwiic_loT-_01.webp?v=1768130958"},{"product_id":"sparkfun-openlog-data-collector-with-machinechat-base-kit","title":"SparkFun OpenLog Data Collector with Machinechat - Base Kit","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Base version of the SparkFun OpenLog Data Collector Kit with Machinechat is an easy way to organize and display your data with the OpenLog Artemis and JEDI One. The SparkFun OpenLog Artemis (without IMU) is an open source data logger that comes preprogrammed to automatically log GPS \/ GNSS, serial data, and various pressure, humidity, and distance data as well as the ability to expand out to any number of our Qwiic sensors. This makes it ideal for data collection, and to display that data, Machinechat's JEDI One will be your best friend!\u003c\/p\u003e\n\u003cp\u003eMachinechat's JEDI One provides an easy-to-use, customizable, one stop dashboard solution for IoT data collection, transformation, visualization, and reporting. Built-in HTTP and TCP servers allow you to start collecting data from sensors and devices in minutes, and custom plug-ins allow you to collect data from virtually any sensor or device. In addition, a fully integrated and self-contained MQTT broker makes it easy to integrate any MQTT based device or sensor. No need to set up a separate broker or use Azure or AWS for MQTT. Just configure and go!\u003c\/p\u003e\n\u003cp\u003eSimply connect a compatible Qwiic-enabled device, power up the OpenLog Artemis, and all incoming serial data is automatically recorded to a log file with baud rates up to 500000bps, supported! The OLA also has four ADC channels available on the edge of the board. Voltages up to 2V can be logged with 14-bit precision up to 1900Hz for one channel and 1000Hz logging all four channels. Additionally, based on feedback from users we've added an on-board RTC so that all data can be time stamped.\u003c\/p\u003e\n\u003cp\u003eThe OpenLog Artemis is highly configurable over an easy to use serial interface. Simply plug in a USB-C cable and open a terminal at 115200bps. The logging output is automatically streamed to both the terminal and the microSD. Pressing any key will open the configuration menu.\u003c\/p\u003e\n\u003cp\u003eIncluded in this kit, you will find an OpenLog Artemis (without IMU), a unique JEDI One license, and connector cables. Additional sensors must be purchased separately. If you are interested in picking up a version of this kit with sensors, be sure to check out the Environmental Monitoring Kit or Air Quality Monitoring Kit, instead!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The version of OpenLog Artemis included in this kit has the ICM-20948 IMU sensor removed. This IC is becoming increasingly difficult to locate. This version still supports auto-detection and logging of over a dozen sensors and GNSS receivers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003cbr\u003e\u003c\/strong\u003e1x SparkFun OpenLog Artemis (without IMU)\u003cbr\u003e1x Machinechat Software License Card - JEDI One\u003cbr\u003e1x SparkFun Qwiic Cable Kit\u003cbr\u003e1x Reversible USB A to C Cable - 0.8m\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSparkFun OpenLog Artemis (without IMU):\u003cbr\u003eArtemis Module (Cortex-M4F based Apollo3 microcontroller)\u003cbr\u003eConfigurable via CH340E and Artemis Firmware Upload GUI\u003cbr\u003eOperating voltage range\u003cbr\u003e3.3V to 6.5V (via VIN with optional external power switch)\u003cbr\u003e5V with USB (via 5V or USB type C)\u003cbr\u003e3.6V to 4.2V with LiPo battery (via VBATT or 2-pin JST)\u003cbr\u003eBuilt-in MCP73831 single cell LiPo charger\u003cbr\u003eMinimum 450mA charge rate\u003cbr\u003e3.3V (via 3V3)\u003cbr\u003eCurrent consumption\u003cbr\u003e~20mA (Run)\u003cbr\u003e~80µA (Sleep)\u003cbr\u003e~18µA (Deep Sleep - regulator shut down)\u003cbr\u003ePorts\u003cbr\u003e1x USB type C\u003cbr\u003e1x LiPo battery enabled\u003cbr\u003e1x Qwiic enabled I2C with power control\u003cbr\u003e1x SWD 2x5 header\u003cbr\u003e4x Analog-to-digital\u003cbr\u003e14-bit, up to 1900Hz, 2V max (3.3V compatible)\u003cbr\u003eSerial\u003cbr\u003eLogging speeds up to 500000bps [1]\u003cbr\u003e1x microSD socket\u003cbr\u003eSupport for FAT32 and older FAT16 formats up to 32GB with power control\u003cbr\u003eRTC with 1mAhr battery backup\u003cbr\u003eLEDs\u003cbr\u003ePower\u003cbr\u003eLiPo charge indicator\u003cbr\u003eSerial Tx and Rx\u003cbr\u003eStatus\u003cbr\u003eMachinechat Requirements:\u003c\/p\u003e\n\u003cp\u003eIntel x86 PC or server\u003cbr\u003eMicrosoft Windows 10\u003cbr\u003eApple Mac OS 10.13.6 and above\u003cbr\u003eUbuntu Linux 16.04 and above\u003cbr\u003eMemory : 4GB or greater\u003cbr\u003eStorage : 30MB min of disk space\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51620176101678,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/KIT-20673_SparkFun___Machinechat_Qwiic_loT_Data_Mo-_01.webp?v=1768131590"},{"product_id":"sparkfun-raspberry-pi-zero-w-camera-kit","title":"SparkFun Raspberry Pi Zero W Camera Kit","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SparkFun Raspberry Pi Zero W Camera Kit provides you with a pan\/tilt camera controlled via a Raspberry Pi Zero W. This kit consists of parts that are easy to assemble and program, expanding the Raspberry Pi Zero W's IoT capabilities and highly tailored accessibility to the Pi Camera Module. With the Zero W camera kit, you will be able to create homemade motion-activated security systems, webcam interfaces for streaming, or monitoring stations for any number of projects and adventures. After just a few steps you'll be set up in no time with your very own remote camera system!\u003c\/p\u003e\n\u003cp\u003eInside this kit is everything you need to assemble your pan\/tilt camera, including a Raspberry Pi Zero W, our own Pi Servo pHAT, a Raspberry Pi Camera Module V2, a pan\/tilt bracket with servos, and all the cables and headers you need to hook them all up.\u003c\/p\u003e\n\u003cp\u003eNote: The Pan\/Tilt Bracket in this kit does not come pre-built, so some assembly is required. Check our Documents for a complete Assembly Guide.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1x Raspberry Pi Zero W w\/ Headers\u003cbr\u003e1x SparkFun Pi Servo pHAT\u003cbr\u003e1x Raspberry Pi Camera Module V2\u003cbr\u003e1x Raspberry Pi Zero Case w\/ Short Camera Cable\u003cbr\u003e1x Pan\/Tilt Bracket Kit\u003cbr\u003e1x Raspberry Pi Zero Camera Cable\u003cbr\u003e1x Raspberry Pi GPIO Male Header - 2x20\u003cbr\u003e1x Raspberry Pi GPIO Tall Header - 2x20\u003cbr\u003e1x Double-Sided Foam Tape Square - 1in.\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51620176298286,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/16327-SparkFun_Raspberry_Pi_Zero_W_Camera_Kit_V2-01.webp?v=1768131679"},{"product_id":"logitech-k400-plus-wireless-touch-keyboard","title":"Logitech K400 Plus Wireless Touch Keyboard","description":"\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Logitech K400 Plus Wireless Touch Keyboard is a compact keyboard with an integrated touchpad that puts all your controls in a single device. Enjoy your entertainment without the clutter of multiple devices. Comfortable, quiet keys and a large (3.5-inch) touchpad make navigation effortless. A wireless range of 10m (33') enables a responsive, uninterrupted connection in even the largest rooms. Watch video, stream music, connect with friends, browse web pages and more without annoying delays or dropouts.\u003c\/p\u003e\n\u003cp\u003eThe familiar key layout eliminates the learning curve so you already know how to use the K400 Plus. Your media interactions are enhanced with comfortable keys, easy-access volume controls, and an arrow-key layout that simplifies navigation. A second left-click button permits two-hand navigation and selection. Shortcuts simplify control for Android and Windows users. Hot keys work right from the box with no configuration required, or you can personalize key and touchpad settings with Logitech Options™ software.\u003c\/p\u003e\n\u003cp\u003eThis keyboard includes a unifying receiver, two AA batteries (pre-installed), and user documentation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Wireless range may vary depending on operating environment and computer setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1x Logitech K400 Plus Wireless Keyboard\u003cbr\u003e2x AA Batteries pre installed\u003cbr\u003eUnifying Receiver\u003cbr\u003eUser Documentation\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eConnection type: Logitech Unifying protocol (2.4GHz)\u003cbr\u003e10m (33\") Wireless range\u003cbr\u003eDimensions: 354.3mm x 139.9mm x 23.5mm\u003cbr\u003eTouch pad dimensions: 76mm x 47mm\u003c\/p\u003e","brand":"Logitech","offers":[{"title":"Default Title","offer_id":51620177838382,"sku":null,"price":0.0,"currency_code":"QAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/1907\/2814\/files\/16300-Logitech_K400_Plus_Wireless_Touch_Keyboard-03.webp?v=1768131815"}],"url":"https:\/\/taalimiyah.com\/collections\/wireless-kits.oembed?page=2","provider":"Taalimiyah","version":"1.0","type":"link"}