Trigger signal source: digital high level (DC3.3V-20V), can be connected to the microcontroller IO port, PLC interface, DC power supply, etc., can connect PWM signal, support signal frequency 0-20khzOutput: DC5V-36V,...

The AOD4184 module is an isolation MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor) control module that uses an optocoupler for signal isolation and a MOSFET to switch high-power loads like motors and solenoid...

FR120N Mosfet control Module features with optocoupler to provide electrical isolation between the high-powered MOSFET side and the logic signals used to control the module this will prevent damaging the...

LR7843 Mosfet control Module Replacement Relay comes with optocoupler isolation, the control signal and the power of the controlled device are isolated, which greatly increases the rigidity of the interference....

Power supply:3-5V, which can be accessed by pin power;Audio recording control mode: the key to control or microcontroller, IO has drawn the line of control;Buttons control audio recording method of...

The Device is a mnolithic integrated high voltage, high current four channel driver designed to accept standard DTL or TTL logic levels and drive inductive loads (such as relays solenoides,...

MOSFET is an electronic devices with good switching characteristics. It is widely used in circuits, such as power supplies switching , motor drives, lighting dimmer and so on. Relay is...

LM358 Gain Amplification Module Operational Amplifier Module is based on the LM358 operational amplifier which is a high-gain, frequency compensated operational amplifier designed to operate from a single power supply...

CP2102 is high integration, built-in USB2.0 full-speed function controller, USB transceiver, crystal oscillator, EEPROM, and asynchronous serial data bus (UART), supports full-featured modem signals, without any external USB device. CP2102...

ESP-01B is the most popular WiFi module in market, and it is a must have item for WiFi IoT project. While it is popular, there are some works needed to...

Micro SD Card Reader Module has an SPI interface which is compatible with any sd card and it uses 3.3V power supply which is compatible with Arduino UNO/Mega.SD module has...

NEO-6M Module：Weight:5gSize:35.8mm*25.6mm NEO-6M Module+External Antenna:Weight:17gModule Size: 35.8mm*25.6mmAntenna Size:28.3mm*28.3mm NEO-7M Module+External Antenna:Weight:17gModule Size: 35.8mm*25.6mmAntenna Size:28.3mm*28.3mm NEO-8M Module+External Antenna:Weight:17gModule Size: 35.8mm*25.6mmAntenna Size:28.3mm*28.3mm 6M Onboard Antenna with Pin:Weight:18gSize:38.9mm*25.2mm 7M Onboard Antenna with Pin:Weight:18gSize:38.9mm*25.2mm...

12V 16-Channel Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Micro-controller (Arduino , 8051, AVR, PIC, DSP,...

An RFID Smart Entry Access Card with EM4100 is a 125kHz, read-only passive RFID card made of durable PVC that is pre-programmed with a unique ID number. It uses radio-frequency...

A high-quality RDM6300 RFID reader module 125Khz, perfect for various electronic applications, including access control, identification, and more. This module features a reliable performance and a durable design, making it...