Analog Discovery Studio: A Portable Circuits Laboratory for Every Student

The Analog Discovery Studio is a fully functional, portable test and measurement device that can turn any cross-functional space into a pop-up electronics laboratory. Equipped with 13 instruments, including an Oscilloscope, Logic Analyzer, Spectrum Analyzer, Waveform Generator, and more; the Analog Discovery Studio provides an entire stack of bench-top instruments with a convenient, replaceable, and breadboardable interface, perfect for enabling student learning anywhere.

Features

• Analog Inputs:
  Used in the Oscilloscope, Network Analyzer, Spectrum Analyzer, Voltmeter, Impedance Analyzer, and Data Logger
  Two analog input channels, accessible through BNC or MTE connectors
  Channel type: differential (with MTE) or single-ended (with BNC)
  Analog bandwidth with BNC cables: 30+ MHz @ 3dB
  Analog bandwidth with MTE flywires: 9 MHz @ 3dB
  Input range ±25 V (±50 V diff)
  Input protected to ±50 V
  14-bit resolution
  Operate at 100 MS/s
• Power Supplies:
  12 volt supply: 12V ±5%; 0.2 Amps max
  -12 volt supply: -12V ±5%, 0.2 Amps max
  5 volt supply: 5.0V ±5%; 1.0 Amps max
  3.3 volt supply: 3.3V ±5%; 1.0 Amps max
  V+ and V- rails: 1V to 5V (V+), and -1V to -5V (V-)
  Maximum power output: 2.1W for each supply
  Maximum current output: 700mA for each supply.
  Note: Remove the protective foam from underneath the Breadboard Canvas before using the power supplies 
  
• Analog Outputs:
  Used in the Waveform Generator and Network Analyzer
  Two arbitrary waveform generator channels, accessible through BNC or MTE connectors
  AC amplitude (max): ±5 V
  Analog bandwidth (BNC or MTE connectors: 8 MHz @ 3dB)
  Operate at 100 MS/s
  Product Compliance:
• HTC: 8471809000
  ECCN: EAR99
• Digital Inputs and Outputs:
  Used in the Logic Analyzer, Pattern Generator, Protocol Analyzer, and Digital I/O
  Channels: 16
  Input logic standard: LVCMOS (1.8/3.3V, 5V tolerant)
  Output logic standard: LVCMOS (3.3V, 12mA)