Description
Description
The Bambu Lab A1 Mini is a compact, beginner-friendly FDM 3D printer with a cantilever design, auto calibration, and optional multi-color printing via AMS Lite. It’s ideal for hobbyists and educators seeking a quiet, affordable, and reliable desktop printer.
Features
- Multi-Color Printing For Everyone
The all-new AMS lite is elegant and reliable, making multi-color 3D printing accessible to everyone - Plug-N-Play
Turn the once steep learning curve into a enjoyable journey
The A1 mini comes to you pre-assembled, pre-squared, and pre-tuned with precision. It only takes about 20 minutes to set up for your first print. - Goodbye to Tedious Manual Calibration And Tuning
A1 mini handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically. - No More "Paper Method"
A1 mini probes the bed with the nozzle to measure the absolute z-offset. No need to stick a paper as reference. - Auto Monitoring And Adjusting The Belts
A1 mini can check the belt tension automatically through the vibration frequency calibration. If the belt is loose, the HMS system will notify you to use the auto belt tensioner to set the belt to the right tension. - Load/Unload Filament With One Touch
No manual setting involved, A1 mini fully automated the filament load/unload process. - Bed Slinger with CoreXY Speed And Quality
Full-metal Rails, Rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments. - Active Motor Noise Canceling
Active Motor Noise Canceling and Silent Mode can bring down the noise level to under 48 dB, making A1 mini one of the quietest 3D printers on the market, so you can take a nap while your printer is working hard. - Privacy
Camera Lens Cover
Forget about the sticker, physically block the camera with a simple mechanism.
Specification
- Build Volume: 180 x 180 x 180 mm³
- Chassis: Steel + Extruded Aluminum
- Hot End: All-Metal
- Extruder Gears: Hardened Steel
- Nozzle: Stainless Steel
- Max Hot End Temperature: 300 ℃
- Nozzle Diameter (Included): 0.4 mm
- Nozzle Diameter (Optional): 0.2 mm, 0.6 mm, 0.8 mm
- Filament Cutter: Yes
- Filament Diameter: 1.75 mm
- Compatible Build Plate: Bambu Textured PEI Plate, Bambu Smooth PEI Plate, Bambu
- Dual-Texture PEI Plate.
- Max Build Plate Temperature: 80 ℃
- Max Speed of Toolhead: 500 mm/s
- Max Acceleration of Toolhead: 10000 mm/s²
- Max Hot End Flow: 28 mm³/s @ABS (Model: 150*150 mm single wall;
- Material: Bambu ABS; Temperature: 280 ℃)
- Part Cooling Fan: Closed Loop Control
- Hot End Fan: Closed Loop Control
- MC Board Cooling Fan: Closed Loop Control
- Filament: PLA, PETG, TPU, PVA
- Not Recommended Filament: ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced
- Polymer
- Monitoring Camera: Low Rate Camera (up to1080P) Timelapse Supported
- Filament Run Out Sensor: Yes
- Filament Odometry: Yes
- Power Loss Recover: Yes
- Filament Tangle Sensor: Yes
- Dimensions: 347 x 315 x 365 mm³
- Net Weight : 5.5 kg