Description
Description
The Bambu Lab A1 Combo is a desktop FDM (Fused Deposition Modeling) 3D printer designed to deliver multi-color, high-speed, and low-noise printing. It comes bundled with the AMS Lite (Automatic Material System), enabling seamless multi-filament printing. This printer is part of Bambu Lab’s A1 series, known for its user-friendly setup and advanced automation features.
Features
- Multi-Color Printing For Everyone
The all-new AMS lite is elegant and reliable, making multi-color 3D printing accessible to everyone - Goodbye to Tedious Manual Calibration And Tuning
A1 handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically. - No More "Paper Method"
A1 probes the bed with the nozzle to measure the absolute z-offset. No need to stick a paper as reference. - Auto Monitoring And Adjusting The Belts
A1 mini can check the belt tension automatically through the vibration frequency calibration. If the belt is loose, the HMS system will notify you to use the auto belt tensioner to set the belt to the right tension. - Load/Unload Filament With One Touch
No manual setting involved, A1 fully automated the filament load/unload process. - Bed Slinger with CoreXY Speed And Quality
Full-metal Rails, Rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments. - Active Motor Noise Canceling
Active Motor Noise Canceling and Silent Mode can bring down the noise level to under 48 dB, making A1 mini one of the quietest 3D printers on the market, so you can take a nap while your printer is working hard. - Privacy -Camera Lens Cover
Forget about the sticker, physically block the camera with a simple mechanism.
Specification
- Build Volume: 256*256*256 mm³
- Chassis: Steel + Extruded Aluminum
- Hot End: All-Metal
- Extruder Gears: Hardened Steel
- Nozzle: Stainless Steel
- Max Hot End Temperature: 300 ℃
- Nozzle Diameter (Included): 0.4 mm
- Nozzle Diameter (Optional): 0.2 mm, 0.6 mm, 0.8 mm
- Filament Cutter: Yes
- Filament Diameter: 1.75 mm
- Max Speed of Toolhead: 500 mm/s
- Max Acceleration of Toolhead: 10000mm/s²
- Max Hot End Flow: 28 mm³/s @ABS (Model: 150*150 mm single wall; Material:
- Bambu ABS; Temperature: 280 ℃)
- Part Cooling Fan: Closed Loop Control
- Hot End Fan: Closed Loop Control
- Supported Filament PLA, PETG, TPU, PVA:
- Max Build Plate Temperature 100 ℃
- Monitoring Camera: Low Rate Camera (up to1080P) Timelapse Supported Filament
- Run Out Sensor: Yes
- Filament Odometry: Yes
- Power Loss Recover: Yes
- Filament Tangle Sensor: Yes