Description
Description
The X7 prints industrial-grade manufacturing jigs, jaws, tools, fixtures, and end-use parts. Designed from the ground up to survive
the production floor environment and capable of printing parts stronger than machined aluminum for a fraction of the cost, the X7
delivers unparalleled surface finish, build size, and reliability. Accelerate part production with Turbo Print, our fastest print mode,
and verify dimensional accuracy with Blacksmith adaptive manufacturing technology — only available on the X7.
Features
- Fused Filament Fabrication (FFF) and Continuous Filament Fabrication (CFF).
continuous fibers (like carbon fiber, fiberglass, Kevlar, HSHT fiberglass) to reinforce parts.
- Plastics: Onyx (micro-carbon nylon), Onyx FR, Onyx ESD, Nylon White, etc.
- Continuous fibers: Carbon fiber, carbon fiber FR, fiberglass, Kevlar (aramid), HSHT fiberglass.
- Has a “Turbo Print” mode that can print up to 2× faster compared to standard mode.
- Kinematic coupling print bed — very flat (within ~80 µm) for repeatable prints.
- Second-generation extruder with “out-of-plastic” and “out-of-fiber” detection to avoid failed prints.
- In-process laser inspection: a laser scanner on the print head continuously checks dimensional accuracy during printing
- Active print calibration and bed leveling via the laser system.
- Default layer height: 100 µm; can go down to 50 µm for finer detail, up to 250 µm.
- Closed-cell infill options with different geometries for strength
Specification
- Process:Fused Filament Fabrication, Continuous Filament Fabrication
- Build Volume: 330 x 270 x 200 mm
- Weight: 48 kg
- Machine Footprint: 584 x 483 x 914 mm
- Print Bed: Kinematic coupling — flat to within 80 μm
- Laser: In-process inspection, active print calibration, bed leveling
- Extrusion System: Second-generation extruder, out-of-plastic and out-of-fiber detection
- Power: 100–240 VAC, 150 W (2 A peak)
- Plastics Available: Onyx, Onyx FR, Onyx ESD, Nylon White, P-PLA, S-TPU
- Fibers Available: Carbon Fiber, Carbon Fiber FR, Fiberglass, Aramid Fiber (Kevlar®), HSHT Fiberglass
- Tensile Strength: 800 MPa (25.8x ABS, 2.6x 6061-T6 Aluminum) *
- Tensile Modulus 60 GPa (26.9x ABS, 0.87x 6061-T6 Aluminum) *
- Layer Height: 100 μm default, 50 μm minimum, 250 µm maximum
- Infill: Closed cell infill: multiple geometries available