Launching Soon

Sort by:
Copper U Shaped Conducting Wire

Copper U Shaped Conducting Wire

QAR 0,00
The coating on the wire provides extra against and abrasion, making it and long-lasting.Designed for students and professionals in need of testing wires for their scientific experiments. Suitable for use...
13.56mhz PN532 NFC Card Reader Module Compatible Raspberry Pi

13.56mhz PN532 NFC Card Reader Module Compatible Raspberry Pi

QAR 0,00
The long effective communication distance is 5 cm Support SCI,IIC,UART interface switching Can be used for contactless communication up to 13.56M COMPATIBLE ISO14443 TYPE A and B standards Specifications IC:NXP...
Non-modulator Tube Laser Receiver Module

Non-modulator Tube Laser Receiver Module

QAR 0,00
This sensor uses a non-modulated laser receiver, please use in the dark place, sunlight or other lamps will interfere, it is recommended to use in the dark environment. Features PCB...
DC Power Supply Module

DC Power Supply Module

QAR 0,00
The DC Power Module DC Power Adapter Plate provides a safe and reliable way to connect various applications to a power source. It is widely used in industrial fields and...
360 Degrees Rotary Encoder Module

360 Degrees Rotary Encoder Module

QAR 0,00
The rotary encoder can count the quantity of output pulse in the positive and negative direction rotation. Unlike the potentiometer, the rotation counting is unlimited. With the button on the...
Five Direction Navigation Button Module 5D Rocker Joystick

Five Direction Navigation Button Module 5D Rocker Joystick

QAR 0,00
We are proud to present the ultimate 5D Rocker Joystick for smooth control and navigation: the Five Direction Navigation Button Module. With its dynamic five-way directional input and precision and...
Light Intensity Illumination Module GY-302 BH1750

Light Intensity Illumination Module GY-302 BH1750

QAR 0,00
This is a Light Intensity Detection Module based on the BH1750 chip. BH1750FVI is a digital Ambient Light Sensor IC for the I2C bus interface. This IC is the most...
Passive Trigger Buzzer

Passive Trigger Buzzer

QAR 0,00
Active Buzzer module produces a single-tone sound when trigger. To produce different tones, use the Passive Buzzer module. The Active Buzzer module consists of a piezoelectric buzzer with a built-in...
Active Trigger Buzzer

Active Trigger Buzzer

QAR 0,00
There is no vibration and source inside the passive, so if the DC signal cannot be used to make its tweet, it must be driven by a 2K"5K square wave....
MAX485 TTL to RS-485 Module

MAX485 TTL to RS-485 Module

QAR 0,00
The MAX485 TTL  to RS485 Converter Module converts TTL signal to RS485 for long range, high data rate error prone differential communication. Multiple receivers may be connected to such a...
Thermoelectric Cooler Peltier Module TEC1-12715

Thermoelectric Cooler Peltier Module TEC1-12715

QAR 0,00
The TEC1-12715 40x40mm Thermoelectric Cooler 15A Peltier Module is the simple application of Peltier Thermoelectric Effect. The module features 127 semiconductor couples in the area of 40mmx40mm. Thermoelectric coolers also...
Thermoelectric Cooler Peltier Module TEC1-12710

Thermoelectric Cooler Peltier Module TEC1-12710

QAR 0,00
Thermoelectric coolers also are known as TEC or Peltier Module create a temperature differential on each side. One side gets hot and the other side gets cool. Therefore, they can...
Vibration Switch Module KY-002

Vibration Switch Module KY-002

QAR 0,00
This module consists of a conductive spring, a 10k resistor, and 3 male header pins. Knocking or shaking the module will cause the spring to momentarily close the circuit. Features1....
Automatic Irrigation Module DIY Kit (Auto Watering System)

Automatic Irrigation Module DIY Kit (Auto Watering System)

QAR 0,00
Tube Length: approx. 50cmAutomatic irrigation module DIY kit Soil moisture detection Automatic water pumping.Fine workmanship and good performance.Easy to use.Long service life. Specifications:This product requires no programming and does not...
Hot Bed Power Module Expansion MOS Tube

Hot Bed Power Module Expansion MOS Tube

QAR 0,00
Completely solve the hot bed power is too large and the load current issueUnder the premise of normal cooling, it work stable under I(Max)=20A.The current must not exceed 20A while...