Description
Completely solve the hot bed power is too large and the load current issue
Under the premise of normal cooling, it work stable under I(Max)=20A.The current must not exceed 20A while the process working.
If you need anything greater or equal to 15A this module is a must
For example, if your total power usage is 240W and you have 12V power supply, then it means at least 20A is needed (20X12=240W).
This high power module helps your 3D printer equipped with the Chitu controller board (capable of max 15A) become even more powerful. With this add-on module to board lead the maximum current up to 25A.
This module is based on power MOSFET and will allow PID control of the heated bed (DC-DC Relays usually do not allow this)
Features
- Heated bed power module
- Based on powerful MOSFET HA210NO6
- Size: 60*50mm
- Mounting holes: 3.2mm diameter, for M3 screws.
- Distance between holes: 54*43mm
- Very powerful MOSFET to withstand higher current than normal RAMPS or other 3D
- Printer controller can handle
- Voltage: 12V-24V
- Under the premise of normal cooling, it work stable under I(Max)=25A, the current must not exceed 25A while the process working
Specifications:
- Size: 6 x 5 x 3.1cm / 2.36 x 1.97 x 1.22
- Mounting holes: 3.2mm diameter, for M3 screws.
- Distance betweeen holes: 54*43mm
- Very powerful MOSFET to withstand higher current than normal RAMPS or other 3D
- Printer controller can handle
- Voltage: 12V-24V
Maximum current with active cooling: 210A