Description
This module consists of a conductive spring, a 10k resistor, and 3 male header pins. Knocking or shaking the module will cause the spring to momentarily close the circuit.
Features:
1. Omnidirectional, any Angle can be activated
2. This switch is suitable for small current tripping circuit
3. Operating voltage: 3,3 v ~ 5v
4. Digital switch output (0 and 1)
5. Dimensions: 0.94x0.59x0.35 inches (2,4x1, 5x0.9 cm)
6. Component model: sw-18015p
Specifications
- Connect the module signal pin (S) to pin 3 on the Arduino.
- Then connect the module’s power pin (middle) and ground (-) to +5V and GND on the
- Arduino respectively.
- KY-002 Arduino
- S Pin 3
middle +5V
– GND