Description
This module consists of a conductive spring, a 10k resistor, and 3 male header pins. Knocking or shaking the module will cause the spring to momentarily close the circuit.
Features
1. Omnidirectional, any Angle can be activated
2. This switch is suitable for small current tripping circuit
3. Operating voltage: 3,3 v ~ 5v
4. Digital switch output (0 and 1)
5. Dimensions: 0.94x0.59x0.35 inches (2,4x1, 5x0.9 cm)
6. Component model: sw-18015p
Specifications
- Connect the module signal pin (S) to pin 3 on the Arduino.
- Then connect the module’s power pin (middle) and ground (-) to +5V and GND on the Arduino respectively.
- KY-002 Arduino
S Pin 3
middle +5V
– GND